Do the input signal settings match the signals from the connected
device?
Change the setting according to the signal for the connected equipment.
sSignal - Advanced - Input Signalp.129
Is the image brightness adjusted correctly?Adjust the Brightness setting from the Configuration menu.
sImage - Brightnessp.127
Are the cables connected correctly?Check that all the cables required for projection are securely connected.
Check that no cables are disconnected and that there are no poor contacts in the cables.
s "Connecting Equipment" p.45
Is the
Contrast
g
adjusted correctly?Adjust the Contrast setting from the Configuration menu.
sImage - Contrastp.127
Is the color adjustment set correctly?Adjust the Gamma or RGBCMY setting from the Configuration menu.
sImage - Advancedp.127
s "Adjusting the Image" p.80
Are the color saturation and tint adjusted correctly?Adjust the Color Saturation and Tint settings from the Configuration menu.
sImage - Color Saturation, Tintp.127
Is the brightness of the room appropriate?If the room is darker than when the auto adjustment was performed, the tint of the projected images may not be displayed
correctly. Make the room darker and then perform auto adjustment again.
s "Screen Matching" p.99
s "Color Calibration" p.188
Images appear dark
CheckRemedy
Is the image brightness set correctly?Check the Brightness and Brightness Settings values from the Configuration menu.
sImage - Brightnessp.127
s
Settings - Brightness Settingsp.131
Is the
Contrast
g
adjusted correctly?Adjust the Contrast setting from the Configuration menu.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Epson EB-L1300U wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.