Bedienungsanleitung Epson EB-L500 (Seite 194 von 225) (Englisch)

675068

194

Zoom out

Zoom in

Vorherige Seite

1/225

Nächste Seite

Solving Image or Sound Problems

194

• If you are projecting from an HDMI source, replace the HDMI cable with

the shorter one.

gg Related Links

• "Displaying From a Laptop" p.194

• "Displaying From a Mac Laptop" p.194

Displaying From a Laptop

If the message "No Signal" is displayed when projecting from a laptop, you

need to set up the laptop to display on an external monitor.

Hold down the laptop's Fn key and press the key labeled with a monitor

icon or CRT/LCD. (See your laptop manual for details.) Wait a few

seconds for an image to appear.

To display on the laptop's monitor and the projector, try pressing the

same keys again.

If the same image is not displayed by the laptop and projector, check

the Windows Display utility to make sure the external monitor port is

enabled and extended desktop mode is disabled. (See your computer or

Windows manual for instructions.)

If necessary, check your video card settings and set the multiple display

option to Clone or Mirror.

Displaying From a Mac Laptop

If the message "No Signal" is displayed when projecting from a Mac laptop,

you need to set up the laptop for mirrored display. (See your laptop manual

for details.)

Open the System Preferences utility and select Displays.

Select the Display or Color LCD option, if necessary.

Click the Arrange or Arrangement tab.

Select Mirror Displays.

Solutions When "Not Supported" Message Appears

If the message "Not supported" is displayed, try the following solutions:

• Make sure the correct input signal is selected in the projector's Signal menu.

• Make sure the computer's display resolution does not exceed the projector's

resolution and frequency limits. If necessary, select a different display

resolution for your computer. (See your computer manual for details.)

gg Related Links

• "Input Signal Settings - Signal Menu" p.153

• "Supported Monitor Display Resolutions" p.212

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:

• If you are projecting from a computer using a VGA computer cable, press

the [Auto] button on the remote control to optimize the image signal.

• Make sure you selected the correct Screen Type setting for the screen you

are using.

s Extended > Display > Screen > Screen Type

• Make sure the Scale setting in the Signal menu is turned off.

• Try adjusting the image position using the Position setting in the

projector's Signal menu.

• Try adjusting the image position using the Screen Position setting.

s Extended > Display > Screen > Screen Position

• Press the [Aspect] button on the remote control to select a different image

aspect ratio.

• Change the Resolution setting in the projector's Signal menu according to

the signal for the connected equipment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-L500 Seite 194

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-L500

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info