617832
101
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
101
Image Quality Settings - Image Menu
Settings on the Image menu let you adjust the quality of your image for the
Setting Options Description
input source you are currently using. The available settings depend on the
Color Temp. Color Temp. Sets the color tone based on color
currently selected input source.
temperature. The image is tinted blue
Customized
when a high value is selected and tinted
red when a low value is selected.
Color Temp.: select to set the color
temperature range from 3200K to
10000K (for sRGB mode) or from 0 to 10
(for other color modes).
Customized: adjusts the individual R
(red), G (green), and B (blue)
components of the offset and gain.
Image Noise Reduction Reduces flickering in analog images.
Enhancement
Advanced Deinterlacing Sets whether or not to convert
interlaced-to-progressive signals for
(For interlaced
certain video image types.
signal
[480i/576i/1080i] Off: for fast-moving video images.
input)
Video: for most video images.
To change settings for an input source, make sure the source is connected and
Film/Auto: for movies, computer
select that source.
graphics, and animation.
Auto Iris Off Adjusts the projected luminance based
Setting Options Description
on the image brightness when the Color
Normal
Mode is set to Dynamic or Cinema.
Color Mode See the list of Adjusts the vividness of image colors for
High Speed
available Color various image types and environments.
Reset Resets all adjustment values except Color
Modes
Mode on the Image menu to their
Brightness Varying levels Lightens or darkens the overall image.
default settings.
available
Contrast Varying levels Adjusts the difference between light and
available dark areas of the image.
The Brightness setting does not affect lamp brightness. To change
the lamp brightness mode, use the Power Consumption setting in
a
Color Saturation Varying levels Adjusts the intensity of the image colors.
the projector's ECO menu.
available
You cannot select the Noise Reduction setting when the following
Tint Varying levels Adjusts the balance of green to magenta
are being input.
available tones in the image.
The Deinterlacing setting is set to Off.
Sharpness Varying levels Adjusts the sharpness or softness of
A digital RGB signal is being input.
available image details.
An interlaced signal (480i/576i/1080i) is being input.
101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson EB-S300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson EB-S300

Epson EB-S300 Bedienungsanleitung - Deutsch - 169 seiten

Epson EB-S300 Bedienungsanleitung - Holländisch - 169 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info