617832
136
Zoom out
Zoom in
Vorherige Seite
1/166
Nächste Seite
136
Projector Indicators Status
Indicator and status Problem and solutions Indicator and status Problem and solutions
Power: Off Lamp has a problem. Power: Off Power error (Ballast). Turn the projector off, unplug it,
and contact Epson for help.
Status: Flashing blue Status: Flashing blue
Check to see if the lamp is burned out, broken, or
installed incorrectly. Reseat or replace the lamp as
Lamp: Lit orange Lamp: Lit orange
necessary.
Temp: Off Temp: Lit orange
Clean the air filter.
If operating the projector at high altitude, set the High
Altitude Mode setting to On in the projector's
Wireless LAN indicator Problem and solutions
Extended menu.
and status
s Extended > Operation > High Altitude Mode
Lit blue Wireless LAN is available.
If the problem persists, unplug the projector and
Flashing blue (quickly) Connecting to a device.
contact Epson for help.
Lamp cover has a problem.
Flashing blue (slowly) An error has occurred. Turn off the projector and restart
it.
Check that the lamp and the lamp cover are securely
If this does not solve the problem, contact Epson for
installed. The lamp does not turn on if the lamp and
help.
the lamp cover are not installed correctly.
Off Wireless LAN is not available. Make sure the Wireless
Power: Flashing blue Replace the lamp soon to avoid damage. Do not
LAN settings are correct.
continue using the projector.
Status: Indicator status
varies
Lamp: Flashing orange
If the indicators display a pattern not listed in the table above, turn the
Temp: Indicator status
projector off, unplug it, and contact Epson for help.
a
varies
Power: Off A fan or sensor has a problem. Turn the projector off,
gg Related Links
unplug it, and contact Epson for help.
Status: Flashing blue
• "Cleaning the Air Filter and Vents" p.125
Lamp: Off
• "Replacing the Air Filter" p.125
Temp: Flashing orange
• "Replacing the Lamp" p.127
Power: Off Internal projector error. Turn the projector off, unplug
it, and contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Off
Power: Off Auto iris error. Turn the projector off, unplug it, and
contact Epson for help.
Status: Flashing blue
Lamp: Flashing orange
Temp: Flashing orange
136

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson EB-S300 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson EB-S300

Epson EB-S300 Bedienungsanleitung - Deutsch - 169 seiten

Epson EB-S300 Bedienungsanleitung - Holländisch - 169 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info