Bedienungsanleitung Epson EB-S300 (Seite 140 von 166) (Englisch)

617832

140

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

140

Solving Image or Sound Problems

• "Correcting the Image Shape with Quick Corner" p.43

Open the System Preferences utility and select Displays.

• Check your computer display settings to disable dual display and set the

resolution within the projector's limits. (See your computer manual for

Select the Display or Color LCD option, if necessary. details.)

• Check the resolution assigned to your presentation files to see if they are

Click the Arrange or Arrangement tab.

created for a different resolution. (See your software help for details.)

• Make sure you selected the correct projection mode. You can select Front,

Select Mirror Displays.

Front/Ceiling, Rear, or Rear/Ceiling as the Projection setting in the

projector's Extended menu.

gg Related Links

Solutions When "Not Supported" Message Appears

• "Input Signal Settings - Signal Menu" p.103

If the message "Not supported" is displayed, try the following solutions:

• "Projector Setup Settings - Extended Menu" p.107

• "Supported Monitor Display Resolutions" p.153

• Make sure the correct input signal is selected on the projector's Signal

menu.

• Make sure the computer's display resolution does not exceed the projector's

Solutions When the Image is not Rectangular

resolution and frequency limits. If necessary, select a different display

If the projected image is not evenly rectangular, try the following solutions:

resolution for your computer. (See your computer manual for details.)

• Place the projector directly in front of the center of the screen, facing it

gg Related Links

squarely, if possible.

• "Input Signal Settings - Signal Menu" p.103

• If you adjusted the projector height using the projector feet, press the

keystone buttons on the projector to adjust the image shape.

Solutions When Only a Partial Image Appears

• Turn on horizontal keystone slider in the projector's Settings menu. Then,

adjust the slider until the image is evenly rectangular.

If only a partial computer image appears, try the following solutions:

s Settings > Keystone > H/V-Keystone > H-Keystone Adjuster

• Press the [Auto] button on the remote control to optimize the image signal.

• Turn on automatic adjustment in the projector's Settings menu. The

• Try adjusting the image position using the Position setting in the

projector automatically corrects the image every time you move the

projector's Signal menu.

projector.

• Press the [Aspect] button on the remote control to select a different image

s Settings > Keystone > H/V-Keystone > Auto V-Keystone

aspect ratio.

• Adjust the Quick Corner setting to correct the image shape.

• Change the Resolution setting in the projector's Signal menu according to

s Settings > Keystone > Quick Corner

the signal for the connected equipment.

gg Related Links

• If you zoomed into or out of the image using the [E-Zoom] buttons, press

• "Auto V-Keystone" p.41

the [Esc] button until the projector returns to a full display.

• "Correcting the Image Shape with the Keystone Buttons" p.42

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-S300 Seite 140

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-S300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info