Bedienungsanleitung Epson EB-S400 (Seite 31 von 170) (Englisch)

675110

Zoom out

Zoom in

Vorherige Seite

1/170

Nächste Seite

Turning On the Projector

Warning

• Never look into the projector lens when the lamp is on. This can damage your

eyes and is especially dangerous for children.

• When turning on the projector at a distance using the remote control, make sure

there is no one looking into the lens.

• During projection, do not block the light from the projector with a book or other

objects. If the light from the projector is blocked, the area on which the light

shines becomes hot which could cause it to melt, burn, or start a fire. Also, the

lens may get hot due to the reflected light which could cause the projector to

malfunction. To stop projection, use the A/V Mute function, or turn off the

projector.

• A mercury lamp with high internal pressure is used as the projector's light

source. If the lamp is subjected to vibrations or shocks, or if it is used for an

overly extended length of time, the lamp may break or it may not turn on. If the

lamp explodes, gases may escape and small fragments of glass may be scattered

which could cause an injury. Be sure to observe the instructions below.

• Do not disassemble or damage the lamp or subject it to any impacts.

• Do not bring your face close to the projector while it is in use.

• Particular care should be taken when the projector is installed to a ceiling, as

small pieces of glass may fall down when the lamp cover is removed. When

cleaning the projector or replacing the lamp yourself, be very careful not to

allow such pieces of glass to get into the eyes or mouth.

If the lamp breaks, ventilate the area immediately, and contact a doctor if any

fragments of broken glass are inhaled or get into the eyes or mouth.

• When the Direct Power On setting is set to On in the projector's

Extended menu, the projector turns on as soon as you plug it in.

Note that the projector also turns on automatically in cases such as

recovery from a power outage.

s Extended > Operation > Direct Power On

• If you select a specific port as the Auto Power On setting in the

projector's Extended menu, the projector turns on as soon as it

detects a signal or cable connection from that port.

s Extended > Operation > Auto Power On

gg Related Links

• "Home Screen" p.31

• "Projector Setup Settings - Extended Menu" p.106

Home Screen

The Home screen feature allows you to easily select an image source and

access useful functions. You can display the Home screen by pressing the

[Home] button on the control panel or remote control. The Home screen is

also displayed when you turn on the projector and no signal is being input.

Press the arrow buttons on the control panel or remote control to select a

menu item, and then press [Enter].

Selects the source you want to project.

Displays the Connection Guide. You can select the wireless connection methods

according to the devices you are using, such as smartphones or computers.

Displays the Help screen.

Displays the projector's menu.

Performs menu options assigned to Home Screen in the projector's Extended

menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-S400 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-S400

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info