Bedienungsanleitung Epson EB-X130 (Seite 141 von 166) (Englisch)

617828

141

Zoom out

Zoom in

Vorherige Seite

1/166

Nächste Seite

141

Solving Image or Sound Problems

• "Supported Monitor Display Resolutions" p.153

Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry

If the projected image contains electronic interference (noise) or static, try the If the projected image is fuzzy or blurry, try the following solutions:

following solutions:

• Adjust the image focus.

• Check the cables connecting your computer or video source to the

• Clean the projector lens.

projector. They should be:

• Separated from the power cord to prevent interference

To avoid condensation on the lens after bringing the projector in

from a cold environment, let the projector warm up to room

• Securely connected at both ends

temperature before using it.

• Not connected to an extension cable

• No longer than 3 meters

• Position the projector close enough to the screen.

• Check the settings on the projector's Signal menu to make sure they match

• Position the projector so the keystone adjustment angle is not so wide that it

the video source.

distorts the image.

• If available for your video source, adjust the Deinteracing and Noise

• Turn on automatic adjustment in the projector's Settings menu.

Reduction settings in the Image menu.

s Settings > Keystone > H/V-Keystone > Auto V-Keystone

• Select a computer video resolution and refresh rate that are compatible with

• Adjust the Sharpness setting in the projector's Image menu to improve

the projector.

image quality.

• If you are projecting from a computer, press the [Auto] button on the

remote control to automatically adjust the Tracking and Sync. settings. If

remote control to automatically adjust the tracking and sync. If any bands

the images are not adjusted correctly, manually adjust the Tracking and

or overall blurriness remain, display a uniformly patterned image on the

Sync. settings in the projector's Signal menu.

screen and manually adjust the Tracking and Sync. settings in the

• Select Auto as the Resolution setting in the projector's Signal menu.

projector's Signal menu.

• If you adjusted the image shape using the projector controls, try decreasing

• If you are projecting from a computer, use a lower resolution or select a

the Sharpness setting in the projector's Image menu to improve image

resolution that matches the projector's native resolution.

quality.

gg Related Links• If you connected an extension power cable, try projecting without it to see if

• "Input Signal Settings - Signal Menu" p.103

it caused interference in the signal.

• "Image Quality Settings - Image Menu" p.101

• If you are using the USB Display function, turn off the Transfer layered

• "Supported Monitor Display Resolutions" p.153

window setting in the Epson USB Display Settings program on your

• "Focusing the Image Using the Focus Ring" p.48

computer.

• "Cleaning the Lens" p.123

gg Related Links

• "Input Signal Settings - Signal Menu" p.103

• "Image Quality Settings - Image Menu" p.101

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-X130 Seite 141

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-X130

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info