Bedienungsanleitung Epson EB-X550KG (Seite 195 von 217) (Englisch)

675233

195

Zoom out

Zoom in

Vorherige Seite

1/217

Nächste Seite

Solving Network Problems

195

• Set the Standby Mode setting to Communication On in the projector's

ECO menu so the network software can monitor the projector in standby

mode.

• Make sure your electrical outlet or power source is functioning correctly.

gg Related Links

• "Network Menu - Notifications Menu" p.156

Solutions When the Image Contains Static During

Network Projection

If the projected image contains static during network projection, try the

following solutions:

• Check for any obstacles between the access point, the computer, the mobile

device, and the projector, and change their positions to improve

communication.

• Make sure that the access point, the computer, the mobile device and the

projector are not too far apart. Move them closer together and try to

connect again.

• If the wireless connection is slow or your projected image contains noise,

check for interference from other equipment, such as a Bluetooth device or

microwave. Move the interfering device farther away or expand your

wireless bandwidth.

• Reduce the number of connected devices if the connection speed declines.

Solutions When You Cannot Connect Using Screen

Mirroring

If you are unable to connect to the projector using Screen Mirroring, try the

following solutions (EB-2265U/EB-2255U/EB-2165W):

• Check the projector's settings.

• Select On as the Screen Mirroring setting in the projector's Network

menu.

• Change the Display Name so that it does not include "-" in the projector's

Screen Mirroring Settings setting menu or it may not be displayed

correctly on your mobile device.

s Network > Screen Mirroring Settings > Display Name

• Select Off as the Screen Mirroring setting in the projector's Network

menu, and select On again.

• Change the Operation Mode and connect again.

s Network > Screen Mirroring Settings > Operation Mode

• Make sure that the no other devices are connected to the projector with

No Interruptions settings.

s Network > Screen Mirroring Settings > Extended > Meeting Mode

• Change the Channel settings according to the wireless LAN environment.

s Network > Screen Mirroring Settings > Extended > Channel

• Check the mobile device's settings.

• Make sure the settings on the mobile device are correct.

• When connecting again immediately after disconnecting, it may take

some time until the connection is established. Reconnect after waiting for

a while.

• Restart the mobile device.

• Once you have connected using Screen Mirroring, the projector

connection information may be recorded on the mobile device. However,

you may not be able to reconnect to the projector from the recorded

information. Select the projector from the list of available devices.

gg Related Links

• "Projector Network Settings - Network Menu" p.150

• "Network Menu - Screen Mirroring Settings" p.151

Solutions When the Image or Sound Contains Static

During Screen Mirroring Connection

If the projected image or sound contains static when connecting using Screen

Mirroring, try the following solutions (EB-2265U/EB-2255U/EB-2165W):

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-X550KG Seite 195

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-X550KG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info