Bedienungsanleitung Epson EB-Z8350W (Seite 16 von 189) (Englisch)

500276

Zoom out

Zoom in

Vorherige Seite

1/189

Nächste Seite

Name Function

[Auto] button

If pressed during projection of computer analog RGB

signals, it automatically adjusts the Tracking, Sync., and

Position to project the optimum image.

[Aspect] button

The

Aspect Ratio

changes each time the button is

pressed. s p.22

[Lens Shift] button

Press to adjust the lens shift. s p.138

[ID] button

Press to set the remote control ID. s p.150

[Help] button

Displays and closes the Help screen which shows you how

to deal with problems if they occur. s p.81

Remote port

Connects the optional remote control cable set and

outputs signals from the remote control. When the remote

control cable is plugged into this remote port, the remote

receiver is disabled.

[Default] button

Reset to default the setting values being adjusted in some

configuration menus.

[Zoom] button

Press to adjust the zoom. s Quick Start Guide

[Num] button

Use this button to enter passwords, IP Address from the

Network, and so on. s p.38

[Focus] button

Press to adjust the focus. We recommend setting the focus,

zoom, and lens shift at least 30 minutes after you start the

projection, because images are not stable right after

turning on the projector. s Quick Start Guide

Numeric buttons

Use this button to enter passwords, remote control ID

settings, IP Address from the Network, and so on.

s p.152, p.38

[Color Mode] button

Each time the button is pressed, the Color Mode changes.

s p.28

[Freeze] button

Images are paused or unpaused. s p.33

[E-Zoom] buttons

[z][x]

The [z] button enlarges the image without changing the

projection size.

The [x] button reduces the parts of images that have been

enlarged using the [z] button. s p.34

Name Function

[Pointer] button

Press to activate the on screen pointer. s p.34

[Esc] button

Stops the current function. If pressed when the

configuration menu is displayed, it moves to the previous

menu level. s p.47

Acts as a mouse's right button when using the optional

wireless mouse receiver.

[User] button

Press to assign a frequently used item from the available

configuration menu items. By pressing the button the

assigned menu item selection/adjustment screen is

displayed, allowing you to make one-touch settings/

adjustments. s p.55

Test Pattern is assigned as the default setting.

[SDI] button

Changes to images from the SDI input port. s p.21

This button does not function when using EB-Z8355W/

Z8350W/Z10005/Z10000/Z8150.

ID switch

Use this switch to enable (On)/disable (Off) ID settings for

the remote control. s p.150

[HDMI 1/2] button

Each time the button is pressed, the image displayed

changes between the HDMI1 input port and HDMI2

input port.

p.21

[Search] button

Changes to the next input source that is connected to the

projector and is sending an image. s p.20

Indicators

A light is emitted when outputting remote control signals.

Remote control light-

emitting area

Outputs remote control signals.

Installing the batteries

The batteries are not set in the remote control when it is sold. Set the

supplied batteries (two, AA alkaline batteries) to use the remote control.

Part Names and Functions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB-Z8350W Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB-Z8350W

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info