Bedienungsanleitung Epson EB1400Wi (Seite 153 von 215) (Englisch)

500185

153

Zoom out

Zoom in

Vorherige Seite

1/215

Nächste Seite

Wireless LAN menu

To connect the projector to a computer using a wireless LAN, install the

Wireless LAN unit (ELPAP07).

"Installing the wireless LAN unit" p.40

Sub-menu Function

Wireless LAN

Power

Set this to On when connecting the projector and a computer via

a wireless LAN. If you do not want to connect via wireless LAN,

turn it Off to prevent unauthorized access by others.

Wi-Fi Protected

Setup

Set this when connecting to a network via a wireless LAN access

point compatible with

WPS (Wi-Fi Protected Setup)

. You can

easily connect the projector to the access point and make security

settings.

s "Making a WPS (Wi-Fi Protected Setup) Connection with a

Wireless LAN Access Point " p.120

Wireless LAN

Sys.

Sets the wireless LAN system. Normally this should be set to

802.11b/g/n. The connection method is selected automatically

according to the access point settings.

In an area that does not support 802.11n, only 802.11b/g is

displayed.

Sub-menu Function

Connection

Mode

Set the connection mode to use when connecting the projector

and a computer via a wireless LAN.

If you select Quick, a small network is created automatically by

the projector and computer. This is used with EasyMP Network

Projection. If SSID Auto Setting is set to On, the projector

becomes an easy access point; if it is set to Off, the network is

created in

Ad hoc mode

If you select Advanced, the connection is established in

infrastructure mode

through the access point installed.

SSID Auto Set‐

ting

If Connection Mode is set to Quick, when you set this to On, you

can search for the projector more quickly from among multiple

projectors. SSID is set automatically.

When connecting to multiple projectors from 1 computer in

Quick mode, set this to Off, and set the same SSID in all the

projectors you want to connect to.

SSID

Enter an SSID. When an SSID is provided for the wireless LAN

system in which the projector participates, enter the SSID.

You can enter up to 32 single-byte alphanumeric characters. Set

SSID to blank or ANY to establish an ANY connection.

Search Access

Point

When Connection Mode is set to Advanced, you can search for

surrounding access points, and set the SSID to be connected from

those access points. Depending on the access point settings, they

may not be displayed in the list. You must set security separately.

s "Search Access Point screen" p.154

Channel

You can select the channels used to connect in Quick mode. If

interference from other signals occurs, use a different channel.

SSID Display

To prevent the SSID from being displayed on the LAN Standby

screen, set this to Off.

DHCP

You can set whether or not (On/Off) to use

DHCP

If this is set to On, you cannot set any more addresses.

List of Functions

153

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EB1400Wi Seite 153

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EB1400Wi

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info