Bedienungsanleitung Epson Ecotank L6170 (Seite 112 von 186) (Englisch)

681833

112

Zoom out

Zoom in

Vorherige Seite

1/186

Nächste Seite

Note:

❏ Ink bottle codes may vary by location. For the correct codes in your area, contact Epson support.

❏ For users in Europe, visit the following website for information on Epson's ink bottle yields.

http://www.epson.eu/pageyield

Related Information

& “Technical Support Web Site” on page 181

Ink Bottle Handling Precautions

Read the following instructions before relling ink.

Handling precautions

❏ Use ink bottles with the correct part code for this printer.

❏ is printer requires careful handling of ink. Ink may splatter when the ink tanks are lled or relled with ink.

If ink gets on your clothes or belongings, it may not come o.

❏ Do not shake too vigorously or squeeze the ink bottles.

❏ Once you open an ink bottle, we recommend using it as soon as possible.

❏ Store ink bottles at normal room temperature and keep them away from direct sunlight.

❏ Epson recommends using the ink bottle before the date printed on the package.

❏ Store the ink bottles in the same environment as the printer.

❏ When storing or transporting an ink bottle, do not tilt the bottle and do not subject it to impacts or temperature

changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink

bottle upright when tightening the cap, and take precautions to prevent ink from leaking when transporting the

bottle, for example, putting the bottle in a bag.

❏

Aer

bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least

three hours before using it.

❏ Do not open the ink bottle package until you are ready to ll the ink tank. e ink bottle is vacuum packed to

maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may

not be possible.

❏ Prolonged use of the printer when the ink level is below the lower line could damage the printer. Fill the ink

tank to the upper line while the printer is not operating. To display the correct ink level estimates, reset the ink

level

aer

lling

the tank.

❏ To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve

remains in the ink tank when your printer indicates to rell ink. e yields quoted for you do not include this

reserve.

❏ For optimum print results do not maintain low ink levels for extended periods of time.

❏ Although the ink bottles may contain recycled materials, this does not

aect

printer function or performance.

❏ Specications and appearance of the ink bottle are subject to change without prior notice for improvement.

❏ Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the

frequency of your prints and environmental conditions such as temperature.

User's Guide

Relling Ink and Replacing Maintenance Boxes

112

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson Ecotank L6170 Seite 112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson Ecotank L6170

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info