617841
112
Zoom out
Zoom in
Vorherige Seite
1/135
Nächste Seite
Troubleshooting
111
Check Remedy
Are signals being received within the Wire-
lessHD transmission range?
Check the Wireless HD transmission range, and view within that
range.
s p.73
Is the supplied WirelessHD Transmitter
turned on?
Check the
t indicator on the WirelessHD Transmitter. If there is
no power being supplied, make sure the connector for the AC
adapter is securely connected, and then turn on the power
switch.
Is the WiHD indicator for the supplied Wire-
lessHD Transmitter off?
No signal is output from the AV device connected to the Wire-
less HD T ran smi tte r. C heck tha t the cabl es f rom the A V dev ic e an d
the WirelessHD Transmitter are securely connected.
Images are being output from a monitor device, such as a tele-
vision, connected to the Output port on the WirelessHD Trans-
mitter. Press the
button and change the output image
to the projector.
Is the Link indicator for the supplied Wire-
lessHD Transmitter off?
The WirelessHD cannot communicate with the projector. Check
the Wireless HD transmission range, and view within that range.
Has dust collected in the WirelessHD's heat
vent?
If the WirelessHD receiver becomes hot, it may not receive sig-
nals. Clean the dust so that heat can be vented.
Are the projector and the WirelessHD Trans-
mitter facing the correct way?
Setup the projector and the WirelessHD Transmitter so that they
are facing each other.
Interference, distortion, or interruption appear in WirelessHD
Check Remedy
Are signals being received within the Wire-
lessHD transmission range?
Check the Wireless HD transmission range, and view within that
range.
s p.73
Are there any obstructions between the Wire-
lessHD Transmitter and the projector?
Because WirelessHD communicates using a tight beamed elec-
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
s p.73
Is the reception too low? If the transmissions are not strong enough, communication may
be unstable.
Check Reception while images are being projected as you set
up the transmitter as it is sometimes possible to improve the
strength of the transmission by moving the WirelessHD Trans-
mitter or changing its direction.
s Settings - WirelessHD -
Reception p.90
Transmission strength may differ depending on the surround-
ings, or they may be unstable. While checking Reception, setup
the transmitter in a location where the number displayed re-
mains steady.
s Settings - WirelessHD - Reception p.90
112

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson EH-LS10000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson EH-LS10000

Epson EH-LS10000 Bedienungsanleitung - Deutsch - 133 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info