Bedienungsanleitung Epson EH-TW2900 (Seite 36 von 66) (Englisch)

500289

Zoom out

Zoom in

Vorherige Seite

1/66

Nächste Seite

Configuration Menu Functions

This adjusts the images if vertical stripes appear in the images.

This adjusts the images if flickering, fuzziness or interference appear in the images.

• Flickering and fuzziness may also occur when the brightness, contrast

and sharpness settings are

adjusted.

• Clearer adjustments can be obtained if you adjust the "Tracking" first and then adjust the "Sync".

(Setting is not possible when signals are being input from the [HDMI1] /[HDMI2] input port.)

When part of the image is clipped, move the image display position vertically and horizontally so that the

entire image is projected. Press , , and to adjust the position.

(This can be set only when signals are being input from the [Video] / [S-Video] input port, or 480i, 576i,

1080i signals are being input from the [Component] / [HDMI1] / [HDMI2] input port.)

Interlace

(i) signals are converted to progressive (p) signals using a method appropriate for the image.

• Off :This is ideal for using when viewing images with a large amount of movement.

• Video :This is ideal for general video images.

• Film/Auto :Optimum conversion is performed for movie, computer graphics, and animation input

signals.

(Setting is not possible when "4-4 pull-down" is set to "On". And this can be set only when signals are

being input from the [Video] / [S-Video] input port, or 480i, 576i, 1080i signals are being input from the

[Component] / [HDMI1] / [HDMI2] input port.)

Interlace

(i) signals are converted to progressive (p) signals using a method appropriate for the image.

• Video :This is ideal for general video images.

• Film :This is ideal for film images. Select this if the setting is "Auto" and flickering appears in

the film images.

• Auto :Optimum conversion is performed for movie, computer graphics, and animation input

signals.

(This can be set only when signals are being input from the [Video] / [S-Video] input port, or 480i, 576i,

1080i signals are being input from the [Component] / [HDMI1] / [HDMI2] input port.)

Select whether the progressive conversion operation mode is for fast-moving images or for slow-moving

images. The smaller the value, the more suitable the mode is for viewing still images. The larger the

value, the more suitable the mode is for viewing video images.

Setting is not possible when "4-4 pull-down" is set to "On". Set to "Off" if noise occurs at the "Low",

"Normal" or "High" setting. The current and previous frames are compared, and the frame in the middle

of them is interpolated to reduce fuzziness and to produce clearer moving images. The degree of

interpolation can be set to "Low", "Normal" or "High" as desired.

Displayed for input sources other than computer image

Only displayed for Computer image input (does not appear when signals from the [HDMI1] /[HDMI2] input port are being input)

Tracking

Sync.

Position

Progressive

(EH-TW3500/TW2900 only)

Progressive

(EH-TW4500/TW4400 only)

Motion Detection

(EH-TW3500/TW2900 only)

Frame Interpolation (EH-TW4500/TW4400 only)

*1 The setting values are stored separately for each image source and signal type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EH-TW2900 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EH-TW2900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info