Bedienungsanleitung Epson EH-TW5000 (Seite 37 von 63) (Englisch)

500292

Zoom out

Zoom in

Vorherige Seite

1/63

Nächste Seite

Configuration Menu Functions

Configuration Menu

(Setting is not possible when "Color Mode" is set to "x.v. Color.")

This reduces flickering of images.

Three modes are available. Select the mode to suit your liking.

Set "Off" when the image source, such as DVD, contains little electrical interference.

This reduces the noise which can be generated around the edges of images when projecting MPEG

images. Three modes are available. Select your preferred mode.

Set to "ON" to reduce block noise which can occur when projecting MPEG images which have been

compressed at a low bit rate.

(This can be set when NTSC

signals are being input from the [Video] / [S-Video] input ports, or when

component video signals are being input from the [Component] input port.)

If using products designed for destinations such as South Korea that have different black level (setup

level) settings, use this function to obtain correct images. Check the specifications of the connected

equipment when changing this setting.

(

Setting is only possible when Color Mode is "Natural", "Cinema Night", "HD", or "Silver Screen", and

composite video, S-video, or component video signals are being input.)

If bright white areas of images such as clouds and T-shirts on the beach in summer appear uneven and

overexposed, set to "On". When set to "On", the "HDMI Video Range" setting will be ignored.

(Setting is not possible when composite video

, S-Video , or computer signals are being input.)

This changes the display area (the part of projected images).

• 100% - 92% :When 100% is set, the top and bottom of the image is sometimes affected by electrical

interference depending on the image signal. In such cases, try to adjust the display

position ("Position"). p.34

• Auto :Displayed when the signals from

[HDMI1] / [HDMI2]

input port are being input. Signals

are automatically projected at 100% or 92% size depending on the input signals. (Not

displayed when the equipment's DVI port is connected to the projector's

[HDMI1] /

[HDMI2]

input port.)

(Setting is possible only when "EPSON Super White" is "Off". Setting is not possible, however, when

"Color Mode" is set to "x.v. Color.")

When the [HDMI1] / [HDMI2] input port of the projector is connected to a DVD player, for example, set

the video range of the projector to suit the video range setting of the DVD player. The setting at the DVD

player can be either Normal or Expand.

(This setting can be made only when a 1080p/24Hz signal is being input to the [Component] or

[HDMI1], [HDMI2] input terminals.)

For a 1080p/24Hz input signal, you can select between 2-2 pull-down projection or 2-3 pull-down

projection. Selecting "On" sets the 2-2 pull-down.

Displayed for input sources other than computer image

Advanced

Noise Reduction

Mosquito NR (EH-TW5000 only)

Block NR (EH-TW5000 only)

Setup Level

EPSON Super White

Output Scaling

HDMI Video Range

2-2 Pull-down (EH-TW3800 only)

*1 The setting values are stored separately for each image source and signal type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson EH-TW5000 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson EH-TW5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info