214749
38
Zoom out
Zoom in
Vorherige Seite
1/165
Nächste Seite
37
Turning the Projector On
User’s Guide
If more than one external device is connected to the
projector, use the remote control or projector control
panel buttons to select the image source to be
projected while referring to the following table.
You can also use the preview function to select the signal
source. p.38
*1 Only changes when using the EMP-7950.
EasyMP Operation Guide and the EasyMP Network Setup Guide
for details on using EasyMP.
*2 When these buttons are pressed once, the signal name that is currently
set using the configuration menus appears on the screen.
*3 The input signal will not change to the next signal source unless the
[Computer/DVI] button is pressed while the current signal name is still
being displayed on the screen.
If an input signal from the [DVI] or [Computer] port or EasyMP is
currently being projected, the name of this current input signal will be
displayed on the screen when the [Computer/DVI] button is pressed
once.
*4 The item selected using the "Computer Input" command in the
"Setting" menu will appear.
*5 The input signal will not change to the next signal unless the [Video/
BNC] button is pressed while the current signal name is still being
displayed on the screen.
If an input signal from either of the [BNC], [S-Video] or [Video] ports
is currently being displayed, the name of this current input signal will
be displayed on the screen when the [Video/BNC] button is pressed
once.
*6 The item selected using the "BNC Input" command in the "Setting"
menu will appear.
Port
Button to press
On-screen display
Remote
control
Projector
EasyMP
*1
[EasyMP]
The image source changes
each time [Computer/DVI]
is pressed.
*3
EasyMP
Computer
[
Comp
]
*2
Computer (Auto)
*4
Computer (RGB)
*4
Computer
(Component Video)
*4
DVIg
[DVI] DVI
BNC [BNC]
*2
The image source changes
each time [Video/BNC] is
pressed.
*5
BNC (Auto)
*6
BNC (RGB)
*6
BNC
(Component Video)
*6
S-Video [S-Video] S-Video
Video
[Video]
Video
Remote control
38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson emp 7950nl wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info