214749
61
Zoom out
Zoom in
Vorherige Seite
1/165
Nächste Seite
60
Preventing theft (Password Protect)
User’s Guide
Setting Password Protect
Use the following procedure to set Password Protect.
PROCEDURE
Press the [Freeze] button on the remote control for
approximately five seconds.
If using the projector's control panel, hold down the
[ ] button and press the [Menu] button for
approximately five seconds.
The Password Protect menu will be displayed.
Turn "Power ON Protect" on.
(1) Select "Power ON Protect", and then press the [Enter]
button on the remote control or the [Auto/Enter] button on
the projector's control panel.
(2) Select "ON", and then press the [Enter] button on the
remote control or the [Auto/Enter] button on the
projector's control panel.
(3) Press the [ESC] button on either the remote control or the
projector's control panel.
If "Password Timer" is set to "ON", "Timer" can be
used to specify a time limit to use the projector
without entering the password.
If you don't use this setting, proceed to step 4.
(1) Select "Timer" and then press the [Enter] button on the
remote control or the [Auto/Enter] button on the
projector's control panel.
(2) Press the [Num] button on the remote control and use the
numeric buttons to enter a setting time within the range of
1 to 9999 hours, then press the [Enter] button on the
remote control or the [Auto/Enter] button on the
projector's control panel. If you make a mistake entering
the time, press the [ESC] button on either the remote
control or the projector's control panel and re-enter the
time.
When you have finished using the "Password Protect"
menu, the countdown for the elapsed time will start.
Remote control
Password Protect
ON: OFF
Password Timer
Power ON Protect
Set
[ / ] :Select [ ] :Set
Set 9999H
Timer
0H
Time-elapsed
User's Logo Protect
Passward
ON: OFF
ON: OFF
:
[Menu] :Exit
TIP
• If Password Protect has already been enabled, the screen requesting
a password will be displayed.
When the correct password has been entered, the "Password
Protect" menu will be displayed.
See"When Password Protect is enabled" p.58
• When Password Protect has been set to "ON", attach the Password
Protect stickers to your preferred place on the projector to increase
anti-theft effectiveness.
61

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson emp 7950nl wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info