214749
132
Zoom out
Zoom in
Vorherige Seite
1/165
Nächste Seite
131
Problem Solving
User’s Guide
Is the wireless LAN setting for the computer
set to ad hoc modeg?
Change the wireless LAN settings at the computer to ad hoc mode.
"Computer Wireless LAN Settings" in the EasyMP Network Setup Guide
Depending on the manufacturer of the wireless LAN card, you may be able to use a communication
setting utility (such as Client Manager) to set ad hoc mode.
"Ad hoc mode" may be expressed using some other terminology such as "Computer communication
using wireless LAN (WiFi)", "Wi-Fi ad hoc", "802.11 ad hoc", "802.11 Mode Connection" or "Peer
to Peer".
Is the DHCPg function of the wired LAN set to
"ON"?
Set the DHCP setting of the wired LAN to "OFF" in the EasyMP configuration setting screen.
"Connecting in Access Point Mode or Wired LAN Mode" in the EasyMP Network Setup Guide
Has the network adapter been selected
correctly in EMP NS Connection?
If the computer that you are using has several LAN environments, the correct network adapter to be
used by EMP NS Connection must be selected, otherwise it will not be possible to connect. Start
EMP NS Connection and select the network adapter from the "Extension" - "Switch LAN"
(Windows) or "Extension" - "Network Set" (Macintosh) menu.
If making a wireless LAN connection, are
there any settings within the power saving
features of your computer which disable the
wireless LAN?
Please enable the wireless LAN.
Is the computer's radio wave setting for the
wireless LAN set to low-intensity?
Change the radio wave setting to the highest possible intensity.
Is the LAN card you are using 802.11g or
802.11b compliant?
Only 802.11g or 802.11b compliant equipment can be used. You cannot use equipment conforming
to any other standards (such as 802.11 or 802.11a).
Is WEPg encryption set to "ON" at the
computer?
If using easy connection mode (ad hoc modeg), WEP must be set to "OFF", otherwise connection
will not be possible. Set WEP encryption to "OFF". "Connecting Using Easy Connect Mode
(Wireless LAN)" in the EasyMP Network Setup Guide
Check Remedy
When connected to a wireless
LAN in easy connection mode
When connected to a wireless
LAN in easy connection mode
132

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson emp 7950nl wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info