214263
64
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
63
Using the Configuration Menu Functions
* EMP Monitor : Allows you to monitor multiple projectors on
the network and control them all at once using functions
such as turning the power on and off and switching input
sources.
To use the EMP Monitor, an adapter and cable for conversion
are required. The followings are available products.
(As of May, 2004)
For details on the products, visit LANTRONIX's website.
Adapters:
UDS100, UDS200 (LANTRONIX)
Cables:
For the UDS100
RS-232C cable (straight, mini D-Sub9pin female/mini
D-Sub25pin male)
For the UDS200
RS-232C cable (cross, mini D-Sub9pin female/mini
D-Sub9pin female)
For the detailed and current information about the software,
please visit the following website.
http://www.epson.co.uk/support/download/
Sub-menu Function Default
Standby
Mode
Set to "Network ON" to use network monitoring and control
functions and the standby monitor out function while the
projector is in standby mode.
If you change the setting, the new setting will be enabled
after the power is turned off.
We provide softwares* for network monitoring and
controlling projectors.
When set to "Network ON", the Power indicator will flash
orange and then remain orange after disconnecting the
power plug and reinserting it into the electrical outlet.
Network OFF
COM Port This can be set to either "RS-232C" or "USB", depending on
the port that is being used for communication with a
computer.
If you change the setting, the new setting will be enabled
after the power is turned off.
RS-232C
Language Sets the language for message displays.
Press the [Enter] button on the remote control or on the
projector's control panel and then make the selection.
English
(Varies
depending on
country of
purchase)
Reset Returns "Display" and "Operation" settings in the
"Extended" menu to their default settings.
However, if "Background Color" has been set to "Logo" or if
"Startup Screen" has been set to "OFF", the settings will not
be returned to their defaults if "Users Logo Protect" is set to
"ON". sp.29
Press the [Enter] button on the remote control or on the
projector's control panel.
To return all settings such as the "Image" and "Signal"
menu settings to their default values, select "Reset All"
from the "Reset" menu.
sp.65
-
64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson emp 81 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info