The items that can be set will vary depending on the input source that is currently being projected. Setting details are saved separately for each source.
Sub-menuFunction
Auto SetupSelects whether the automatic adjustment function for automatically optimising images when the input source is changed is turned "On" or
"Off". sp.13
TrackinggAdjusts computer images when vertical stripes appear in the images. sp.13
Sync.gAdjusts computer images when flickering, fuzziness or interference appear in the images. sp.14
PositionMoves the image display position vertically and horizontally.
Progressive(Adjustment is only possible when composite Video or S-Video signals are being input.)
Off: IP conversion is carried out for each field in the screen. This is ideal for using when viewing images with a large amount of movement.
On: Interlacedg (i) signals are converted into progressiveg (p) signals. This is ideal for using when viewing still images.
Computer
Input (EMP-
X3 only)
Selects the input signal in accordance with the equipment that is connected to the Computer port.
If set to "Auto" the input signal is set automatically in accordance with the connected equipment.
If the colours do not appear correctly when you select "Auto", select the appropriate signal for the connected equipment manually.
Computer1
Input (EMP-
82/62 only)
Selects the input signal in accordance with the equipment that is connected to the Computer1 port.
If set to "Auto" the input signal is set automatically in accordance with the connected equipment.
If the colours do not appear correctly when you select "Auto", select the appropriate signal for the connected equipment manually.
Computer2
Input (EMP-
82/62 only)
Selects the input signal in accordance with the equipment that is connected to the Computer2 port.
If set to "Auto" the input signal is set automatically in accordance with the connected equipment.
If the colours do not appear correctly when you select "Auto", select the appropriate signal for the connected equipment manually.
Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.
Art des Missbrauchs:
Forenregeln
Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:
Lesen Sie zuerst die Anleitung;
Schauen Sie nach, ob die Frage bereits gestellt wurde;
Stellen Sie die Frage so deutlich wie nur einigermaßen möglich;
Erwähnen Sie was Sie bereits versucht haben um das Problem zu lösen;
Ist Ihr Problem von einem Besucher gelöst dann lassen Sie ihn / sie wissen in diesem Forum;
Falls Sie reagieren möchten, so verwenden Sie bitte das Antworten- Formular;
Da ihre Frage für alle Besucher sichtbar ist, sollten Sie lieber keine persönliche Daten erwähnen.
Neu registrieren
Registrieren auf E - Mails für Epson EMP-82 wenn:
neue Frage gestellt werden
neue Handbücher vorhanden sind
Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.
Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.
Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.
Ihre Frage wurde zu diesem Forum hinzugefügt
Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.