Bedienungsanleitung Epson emp tw10h lcd projector (Seite 16 von 100) (Englisch)

215219

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

14-Function list

Configuration Menus

fSetting menu

Sub menu Function

Screen Position Moves the image display position vertically and horizontally.

• Press the [e] button and adjust the display area on the Position adjustment screen which

is displayed.

Zoom

Caption

Adjustment is possible only when the Zoom aspect function has been selected.

• Vertical size : You can adjust the vertical size of the image.

• Zoom Position: You can adjust the vertical movement of the display position.

Keystone Corrects vertical keystone distortion in the image.

• The projected image changes when keystone correction is carried out.

• If the images become uneven in appearance after keystone correction has been carried

out, decrease the sharpness setting.

Projection • Front : Image is displayed, as is. No vertical/horizontal reversal performed.

• Front/Ceiling: The image is displayed vertically reversed.

• Rear : The image is displayed horizontally reversed.

• Rear/Ceiling : The image is displayed vertically and horizontally reversed.

Setup Level You can select one of two preset black levels.

(When the image source is an NTSC Video/S-Video signal, or when the image source has

been set to Input A, "Component".)

Operation Sleep Mode Sets the energy saving option for when no signal is being input.

• When a Sleep Mode interval has been set, the projector will enter Sleep Mode when no

operation has been carried out for the set time (5, 10 and 30 minutes). Projection will shut

down and the projector enters a standby state after cooling down. (The power indicator

lights orange).

• Projection starts again when the [Power] button is pressed on the projector's contol panel

or the remote control.

Child Lock Sets child lock to ON or OFF.

When child lock is set to "ON", the power will not come on unless you press and hold the

[Power] button on the control panel for at least 3 seconds. (The remote control functions as

normal.)

On Screen

Display

Message When set to "OFF", messages such as "No Signal.", and the name of the selected input

source or colour mode will no longer be displayed. Warning messages such as "Replace the

lamp" will continue to be displayed.

Background

Color

Sets the background colour to black or blue.

Startup

Screen

Sets whether or not the "EPSON" logo will be displayed during projector startup.

Input

Signal

Video

Signal

Selects the colour system of the video signal being input.

(Changes in signal format will only be noticeable when the input source is Video/S-Video.)

Input A You can switch between the sources connected to Input A.

• Component: YCbCr

g/YPbPrg

• RGB-Video: SCART

g, Sync on Green

Volume Adjusts the volume setting

Language Selects the language in which on-screen messages are displayed.

• Press the [e] button and select the desired language from the list which is displayed.

Reset Resets all the adjustment values within the "Setting" menu (except for "Child Lock",

"Input A" and "Language") to their default settings.

• Press the [e] button and select "Yes" on the confirmation screen which is displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson emp tw10h lcd projector Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson emp tw10h lcd projector

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info