215219
20
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
18-When You Suspect a Problem
Troubleshooting
fImage is out of focus (unclear)
fImage is distorted / Image contains interference
fOnly part of the image is displayed (large/small)
fImage colours are poor, tinted green or tinted red/purple
The image is fuzzy
Part of the image is
out of focus
The whole image
is out of focus
Is the projector at the
correct distance from the
screen?
The optimum range for projection is 73-1165cm (2.4-
38.2ft.). Set the projector within this range.
s "Installation method" P.8
Is the lens dirty? s "Cleaning the lens" P.20
Has condensation formed
on the lens?
If the projector is suddenly taken from a cold environment
to a warm environment, condensation may form on the
surface of the lens, and this may cause the images to
appear fuzzy. Set the projector up in the room in which it
is to be used approximately one hour before use. If
condensation forms on the lens, turn off the power and
wait for the condensation to disappear.
Has the focus been
correctly adjusted?
Turn the focus ring to adjust the focus.
Is an extension cable
being used?
If using an extension cable, electrical interference may
affect the signals.
Are the cables connected
correctly?
Check that the cables are securely connected.
Interference may occur if the cables are not connected
securely.
Is the aspect ratio set
correctly?
Press the [Aspect] button to change the aspect ratio.
s "Changing aspect ratio" Quick Reference Guide
Has the "Position" been
adjusted correctly?
Use the "Setting" "Screen" "Position"
configuration menu to correctly adjust the display
position.
Does the lamp need
replacement?
When the lamp is due for replacement, colours will
weaken and the image will become dark. Replace the lamp
when this is the case. s "Lamp replacement period" P.22
Adjust each of the settings
in the following menus.
[Menu] button "Image"
"Picture Quality"
"Contrast", "Color Temperature"
"Saturation", "Tint", "Brightness"
Are the cables connected
correctly?
If cables connecting to component video equipment are
not connected securely, certain colours may not be
displayed.
20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson emp tw10h lcd projector wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson emp tw10h lcd projector

Epson emp tw10h lcd projector Bedienungsanleitung - Deutsch, Englisch, Französisch - 100 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info