Bedienungsanleitung Epson emp tw980 (Seite 34 von 60) (Englisch)

214876

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

Configuration Menu Functions

(This can be set only when signals are being input from the [Video] / [S-Video] input port, 525i, 625i

signals are being input from the [SCART] input port, or 525i, 625i, 1125i signals are being input from

the [Component] / [HDMI] input port.)

Interlace

(i) signals are converted to progressive (p) signals using a method appropriate for the image.

• Off :This is ideal for using when viewing images with a large amount of movement.

• Video :This is ideal for general video images.

• Film/Auto :By pulling down 3-2

/2-2, images (e.g. video films/CG or animations) recorded in 24/30

frames are automatically converted to the optimum progressive signals so that images are

reproduced looking natural as originally intended.

(This can be set only when signals are being input from the [Video] / [S-Video] input port, 525i, 625i

signals are being input from the [SCART] input port, or 525i, 625i, 1125i signals are being input from

the [Component] / [HDMI] input port.)

Select whether the progressive conversion operation mode is for fast-moving images or for slow-moving

images. The smaller the value, the more suitable the mode is for viewing still images. The larger the

value, the more suitable the mode is for viewing video images.

This reduces flickering of images.

Three modes are available. Select the mode to suit your liking.

Set "Off" when the image source, such as DVD, contains little electrical interference.

(Setting is not possible when composite video

, S-Video , or computer signals are being input.)

This changes the display area (the part of projected images).

• 100% - 92% :When 100% is set, the top and bottom of the image is sometimes affected by electrical

interference depending on the image signal. In such cases, try to adjust the display

position ("Position"). p.31

• Auto :Displayed when the signals from [HDMI ] input port are being input. Signals are

automatically projected at 100% or 92% size depending on the input signals. (Not displayed

when the equipment's DVI port is connected to the projector's [HDMI] input port.)

(This can be set when NTSC signals are being input from the [Video] / [S-Video] input ports, when

composite video signals are being input from the [Component] input port, or when signals are being

input from the [SCART] input port.)

If using products designed for destinations such as South Korea that have different black level (setup

level) settings, use this function to obtain correct images. Check the specifications of the connected

equipment when changing this setting.

(

Setting is only possible when Color Mode is "Natural", "Theatre", "Theatre Black 1", or "Theatre Black

2", and composite video, S-video, component video, or SCART signals are being input.)

If bright white areas of images such as clouds and T-shirts on the beach in summer appear uneven and

overexposed, set to "On". When set to "On", the "HDMI Video Range" setting will be ignored.

Displayed for input sources other than computer

Progressive

Motion Detection

Noise Reduction

Output Scaling

Setup Level

EPSON Super White

*1 The setting values are stored separately for each image source and signal type.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson emp tw980 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson emp tw980

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info