214614
74
Zoom out
Zoom in
Vorherige Seite
1/84
Nächste Seite
Refer to the following checklist and make sure you have received all of the items. Contact the place of purchase if items
are missing.
Indicates content which may cause projector damage or malfunction.
Indicates additional information and points which may be useful to know regarding a topic.
s Indicates a page where useful information regarding a topic can be found.
Indicates operating methods and the order of operations.
The procedure indicated should be carried out in the order of the numbered steps.
Indicates remote control or main unit buttons.
“(Menu name)”
Indicates menu items and messages which are displayed on screen.
Example: “Brightness”
Depending on the type of disc, the functions and operations which can be performed may be
different.
These marks inform you of the type of disc being used.
Unpacking the projector
YMain Unit YRemote Control Y
AA type dry cell batteries
(2 pcs.)
YPower cable
(3m)
YUser’s Guide
YDocument CD-ROM
*Some regions may not have the
Document CD-ROM included as
an accessory.
YLens cover
YComponent video cable
Notations used in this guide
1
Quick Start
Settings and
Adjustments
Appendix
Advanced Operations
Safety Instructions..................................................... 2
Use and Storage......................................................... 5
About Discs ............................................................... 7
Part Names ................................................................ 8
Preparing the Remote Control................................... 11
Quick Start
Installation................................................................. 13
Projection distance and screen size ............................................ 13
Connecting the power cable and turning the main power
switch ON................................................................................... 13
Disc Playback ............................................................ 14
Playing a disc and projecting ..................................................... 14
Adjusting the projection position and volume ........................... 15
Stopping playback...................................................................... 16
Turning off the power ................................................................ 16
Basic Operations During Playback............................ 17
Temporarily freezing playback (pause)...................................... 17
Reverse search/forward search................................................... 17
Reviewing playback from a position 10 seconds before............ 18
Skip............................................................................................. 18
Frame advance............................................................................ 18
Slow motion playback................................................................ 19
Temporarily using the projectors light as illumination
(Break)........................................................................................ 19
Selecting a picture quality to suit the conditions of the room
(Color Mode).............................................................................. 19
Temporarily stopping the audio (Mute) ..................................... 19
Advanced Operations
Becoming a playback expert ..................................... 20
Changing the brightness of the display window (Dimmer) ....... 20
Playback from a DVD menu ...................................................... 21
PBC (playback control) playback .............................................. 22
MP3/WMA, JPEG playback ...................................................... 23
Playback by selecting the chapter or track number.................... 25
Designated time playback (time search) .................................... 26
Looping playback of a favorite scene (A-B repeat playback).... 27
Looping playback (repeat play).................................................. 28
Playing in the order of your choice (program play)................... 30
Playback at random (random play) ............................................ 31
Changing the audio language ..................................................... 32
Changing the subtitles display.................................................... 33
Changing the angle..................................................................... 33
Making operations from the menu bar ....................................... 34
Auto-standby, goodnight timer (Sleep timer) settings ............... 35
For better image quality (Progressive mode) ............................. 36
Changing the aspect ratio ........................................................... 36
Tray lock .................................................................................... 38
Child lock ................................................................................... 38
Becoming a Projection Expert................................... 39
Connecting to other video equipment, televisions,
and computers ............................................................................ 39
Projecting images from external video equipment or
a computer .................................................................................. 42
Becoming an Audio Expert ....................................... 44
Listening with headphones ......................................................... 44
Connecting to audio equipment with an optical digital input..... 45
Connecting a subwoofer ............................................................. 45
Selecting Sound Mode................................................................ 46
Adjusting high pitched tones ...................................................... 46
Adjusting the audio playback level ............................................ 47
Adjusting the audio input level of external audio equipment..... 47
Settings and Adjustments
Settings Menu Operation and Functions ................... 48
Using the settings menu.............................................................. 48
Settings menu list ....................................................................... 49
Language code list...................................................................... 51
“DIGITAL AUDIO OUTPUT” settings and output signals ...... 52
Country (area) code list .............................................................. 53
Picture Quality Menu Operations and Functions ...... 54
Using the Picture Quality menu ................................................. 54
Picture Quality menu list ............................................................ 55
Information Menu Operation and Functions ............. 56
Using the Information menu....................................................... 56
Information menu list ................................................................. 57
Appendix
Troubleshooting......................................................... 58
Reading the indicators ................................................................ 58
When the indicators provide no help.......................................... 60
Maintenance .............................................................. 62
Cleaning...................................................................................... 62
Consumables replacement period............................................... 63
How to replace consumables ...................................................... 64
Optional Accessories and Consumables.................... 66
Projection Distance and Screen Size ......................... 67
Compatible Resolution List....................................... 68
Specifications ............................................................ 69
Glossary..................................................................... 72
Index .......................................................................... 73
Inquiries..................................................................... 74
Contents
2
Read the following important information about your
unit.
Important safety information
Warning :
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
Warning :
Never look into the projector lens when the lamp is
switched on as the bright light can damage your eyes. If
there are small children in the house, make sure that the
child lock and so on is set.
Warning :
Never open any covers on the projector except the lamp
cover. Dangerous electrical voltages inside the projector
can cause severe injury. Except as specifically directed in
the User's Guide supplied, do not attempt to service this
product yourself. Refer all servicing to qualified service
personnel.
Warning :
Keep the plastic bags for the projector, accessories and
optional parts out of the reach of children. Children
covering their heads with bags may result in death by
suffocation. Be particularly careful around small children.
Class 1 LASER Product
Caution :
Do not open the top cover. There are no user serviceable
parts inside the unit.
Caution :
When you replace the lamp, never touch the new bulb
with your bare hands. The invisible residue left by the oil
on your hands may shorten the bulb life. Use a cloth or
gloves to handle the new bulb.
Caution :
To reduce the risk of electric shock, do not remove cover
(or back). No user-serviceable parts inside. Refer
servicing to qualified service personnel.
This symbol is intended to alert the user
to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
This symbol is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the unit.
Follow these safety instructions when setting up and
using the projector :
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not overide the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third grounding prong
are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
unit.
Only use attachments/accessories specified by the
manufacturer.
Use only with the cart stand, tripod, bracket, or table
specified by the manufacturer, or sold with the unit.
When a cart is used, use caution when moving the
cart/unit combination to avoid injury from tip-over.
Unplug this unit during lightning storms or when
unused for long periods of time.
Safety Instructions
Important information
Important safety instructions
3
Refer all servicing to qualified service personnel.
Servicing is required when the unit has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Do not expose this unit to water or place objects
containing liquids on this unit.
Do not place the source of a naked flame, such as a lit
candle, on this unit.
Connect this unit to an earthed electrical outlet.
Ensure there is at least 20 cm between the exhaust
vent and any walls, and so on.
Ensure there is at least 10 cm between the air intake
vent and any walls, and so on.
Do not project when the lens cover is on.
It is possible that the lens cover may melt from the
heat and cause burns or injuries.
To interrupt the projection, press [Image On/Off]
during projection.
Do not leave this unit or the remote control with its
batteries installed in such places as the inside of a car
with the windows closed, in direct sunlight, near the
intake/exhaust of an air conditioner or heater, or in
places where the temperature rises above normal.
This may have a negative effect upon the internal
parts of this unit and cause heat deformation or fire.
When unplugging the power plug/power connector,
do not pull on the power cable.
Make sure you grasp the plug or connector part, then
unplug.
Do not set the volume too high from the outset.
A loud sound may be produced suddenly that may
cause damage to the speaker or your hearing. As a
precaution, lower the volume before you switch off
this unit then raise it gradually after you switch it
back on.
When using headphones, do not turn the volume up
too loudly.
You may adversely affect your hearing when
listening at loud volumes over extended periods of
time.
When maintaining this unit, remove the power plug/
power connector from the wall outlet.
If not, you run the risk of an electric shock.
Do not place the projector on an unstable cart, stand,
or table.
Use the type of power source indicated on the
projector. If you are not sure of the power available,
consult your dealer or local electricity company.
Place the projector near a wall outlet where the plug
can be easily unplugged.
Check the specifications of the power cable. Using
an inappropriate power cable could result in fire or
electric shock.
The power cable supplied with the projector is
intended to comply with power supply requirements
for the country of purchase.
Take the following precautions when handling the
plug. Failure to comply with these precautions could
result in fire or electric shock.
Do not insert the plug into an outlet with dust
present.
Insert the plug firmly into the outlet.
Do not handle the plug with wet hands.
Do not overload wall outlets, extension cables, or
integral convenience receptacles. This can cause fire
or electric shock.
Do not place the projector where the cable can be
stepped on. It may result in fraying or damage to the
plug.
Unplug the projector from the wall outlet before
cleaning. Use a damp cloth for cleaning. Do not use
liquid or aerosol cleaners.
Do not block the slots and opening in the projector
case. They provide ventilation and prevent the
projector from overheating. Do not place the
projector on a sofa, rug, or other soft surface, or in a
closed-in cabinet unless proper ventilation is
provided.
Never push objects of any kind through cabinet slots.
Never spill liquid of any kind into the projector.
Unplug the projector from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
When the power cable or plug is damaged or
frayed.
If liquid has been spilled into the projector, or it
has been exposed to rain or water.
If it does not operate normally when you follow the
operating instructions, or if it exhibits a distinct
change in performance, indicating a need for
service.
If it has been dropped or the housing has been
damaged.
4
The internal projector components consist of many
glass parts such as the lens and projection lamp.
The lamp is fragile, and can easily break. If the lamp
breaks, handle the projector with extreme care to
avoid injury from broken glass, and contact your
dealer or the nearest address provided on page 74 for
repairs.
Particular care should be taken when the projector is
installed to a ceiling, as small pieces of glass may fall
down when the lamp cover is removed. Be very
careful not to allow such pieces of glass to get into
the eyes or mouth.
Material or paper may get stuck against the air filter
underneath the projector while it is in use. Remove
anything from underneath the projector that might
get stuck against the air filter in this way.
Never try to remove the lamp immediately after use.
Doing so will result in serious burns. Before
removing the lamp, turn off the power supply and
wait the time specified on page 64 to allow the lamp
to cool completely.
A mercury lamp with high internal pressure is used
as the projector's light source. Mercury lamps may
make a loud noise when they break. Handle the lamp
with extreme care while observing the following.
If the following points are not observed, injury or
poisoning may result.
Do not damage the lamp or subject it to any
impacts.
Do not use the lamp after the lamp replacement
period has elapsed. Once the lamp replacement
period has elapsed, the possibility of the lamp
breaking becomes greater. When the lamp
replacement message appears, replace the lamp
with a new one as soon as possible.
The gases inside mercury lamps contain mercury
vapor. If the lamp breaks, immediately ventilate
the room to prevent the gases that are released
when the lamp breaks from being inhaled or
coming into contact with the eyes or mouth.
Do not bring your face close to the projector while
it is in use, in order to prevent the gases that are
released when the lamp breaks from being inhaled
or coming into contact with the eyes or mouth.
If the lamp breaks and needs to be replaced with a
new lamp, contact the place of purchase or the
nearest address provided on page 74 to carry out
the replacement. If the lamp breaks, pieces of
broken glass may get scattered around inside the
projector.
Particular care should be taken when the projector
is installed to a ceiling, as small pieces of glass
may fall down when the lamp cover is removed. If
cleaning the projector or replacing the lamp
yourself, be very careful not to allow such pieces
of glass to get into the eyes or mouth.
If the lamp breaks and gas from the lamp or
fragments of broken glass are inhaled or get into
the eyes or mouth, or if any other ill effects are
noticed, immediately seek medical advice.
In addition, consult your local regulations
regarding proper disposal and do not place in the
trash.
If there is an electrical storm, do not touch the power
plug, otherwise you may receive an electric shock.
Clean the inside of the projector periodically.
If the inside of the projector has not been cleaned for
a long time, dust may build up and cause fire or
electric shocks. Contact your dealer or the nearest
address provided on page 74 to clean inside the
projector at least once a year. A charge will be levied
for this service.
If using a remote control that takes batteries, keep
these batteries out of the reach of children. Batteries
are choking hazards and can be very dangerous if
swallowed.
If the batteries are swallowed, seek medical
assistance immediately.
When replacing batteries, take the following
precautions.
Replace the batteries as soon as they run out.
If the batteries leak, wipe away battery fluid with a
soft cloth. If fluid gets on your hands, wash
immediately.
Do not expose batteries to heat or flame.
Dispose of used batteries according to local
regulations.
Remove the batteries if you won't be using the
projector for a long period of time.
Do not stand on the projector or place heavy objects
on it.
5
Take note of the following advice in order to prevent malfunction and damage.
Use and store this unit within the operating
temperature range and storage temperature
range as specified in this manual.
Do not install the unit in a place prone to
vibration or shock.
Do not install the unit close to television, radio or
video equipment that generates magnetic fields.
This may have a negative effect when projecting the
playback of audio and image with this unit, and may
cause this unit to malfunction.In the event that such
symptoms occur, move the unit further away from
any television, radio and video equipment.
Do not install this machine on an incline.
Do not move this unit during playback.
This may damage the disc or cause malfunction.
Avoid using or storing this unit in cigarette or
other smoke filled places, or in rooms containing
a large amount of dust.
This may cause degradation of the image quality.
Do not touch the projection lens with your bare
hands.
If fingerprints or marks are left on the face of the
lens, the image will not be projected clearly.Make
sure the lens cover is securely in place when not in
use.
EPSON will not be held responsible for damage
arising from projector or lamp failure outside the
range of that which is covered in your warranty
terms.
If you move this unit from a cold place into a warm
room, or, if the room in which this unit is installed is
heated rapidly, condensation (moisture) may form
internally or on the lens surface.If condensation forms,
it may not only cause incorrect operation such as
weakening of the image, but also damage the disc and/
or parts.In order to prevent against condensation, setup
this unit in the room approximately one hour before it is
to be used.If by some chance condensation does form,
turn on the main power switch then wait one to two
hours before use. Do not use the lamp during this time.
This machine uses a mercury lamp with a high internal
pressure as its light source.Mercury lamps have the
following characteristics.
Lamp brightness decreases once the rated lamp usage
time has passed.
When the lamp reaches the end of its life, it may enter
a state where it will no longer light, or it may explode
with a loud noise due to impact, deterioration, or the
expiration of its usage time.
Depending on the individual difference of each lamp
and the conditions of use, there is a considerable
difference in the time it takes for the lamp to reach the
end of its life.
To provide against contingencies, prepare a
replacement lamp in advance.
The potential for the lamp to explode increases once
the lamp usage time has been exceeded.
When the lamp replacement message appears,
promptly replace the lamp with a new one.
Although the liquid crystal panel is made using very
precise high technology, you may see some black
pixels, or pixels that are always lit red, blue, or
green.You may also be able to see lines with irregular
brightness or color.
These are normal characteristics of liquid crystal
panels, and are not indicative of any malfunction.Be
aware of this fact.
Do not leave this unit projecting a still image over a
long period of time.
It is possible that remnants of the image may remain
(screen burn). You may be able to avoid screen burn
by switching off the power and leaving the projector
for a while.If the screen burn does not disappear,
contact your dealer for advice. sp. 74
Use and Storage
Notes on handling and storage
Condensation
Lamp
LCD panel
6
Make sure the lens cover is securely in place.
Remove the disc and close the disc tray.
Move the projector, holding it as shown in the
following illustration.
Be careful not to damage the mesh covering the
speaker with your hands.
Many glass and precision parts are used within this
unit.In order to prevent impact during transportation,
re-use the box and protective packaging you received
at the time of purchase.
If you no longer have the original packing, protect
the outside of this unit with shock absorbing material
to protect it from impact, place it inside a strong box
and make sure it is clearly labeled for the
transportation of precision equipment.
Take off the lens cover and wrap it.
If using a courier service for transportation, inform
them that this unit contains precision equipment and
should be handled accordingly.
* Your warranty does not cover any damages that may
occur to this product during transportation.
This unit is equipped with Macrovision copy
protection.The intellectual property rights to the
patent of this copy protection technology are owned
by the Macrovision company of America, and others.
When employing this technology, a license is
required from the Macrovision company.The
Macrovision company does not authorise the use of
this technology except for a limited range of intended
purposes, including home use.Further, remodeling,
disassembly, and reverse engineering are prohibited.
Reproduction of a disc for the purposes of broadcast,
projection in public, public musical performance, or
rental (regardless of compensation, remuneration, or
lack thereof) without the permission of the copyright
owner, is strictly prohibited.
When moving this unit
Transportation cautions
Copyright
7
Readable disc types
The following discs can be played.
You cannot play DVD videos if the disc region code
does not correspond to the region code label on the
side of this unit.
The performance and tonal quality of copy-control
CD discs that do not conform to the compact disc
(CD) standard cannot be guaranteed with this unit.
CDs that conform to the CD standard will bear the
following compact disc logo mark.Check what is
displayed on the packaging of the audio disc.
This unit conforms to the NTSC and PAL television
signal formats.
In the case of DVD video, SVCD, and Video CD,
playback functions may be limited by the intentions
of the software producers.As this unit plays back the
contents of a disc according to the intentions of the
software producers, certain functions may not work
if performed.Refer to the attached user information
of the disc being played.
Depending on how a DVD-R, DVD-RW, CD-R, or
CD-RW has been recorded, or if a disc is dirty,
smeared, scratched, or warped, some discs may not
be readable, or playback make take some time.
Only the audio of the following discs can be
reproduced.
Unreadable disc types
The following discs cannot be played.It is possible to
damage the speaker with the noise generated if these
discs are played back by mistake.
Round discs with a diameter other than 8 cm or
12 cm
Specially made non-circular (heart, polygon shaped,
and so on) discs
Disc Handling
Avoid touching the playback side with your bare
hands.
Make sure you store discs in their cases when not in
use.
Avoid storing your discs is places with high humidity
or in direct sunlight.
If the playback surface of the disc is dirty with dust
or fingerprints, the image and audio quality may
deteriorate.When the playback surface is dirty, gently
wipe the disc clean with a soft dry cloth, starting
from the center of the disc then moving outwards.
Do not use cleaning products such as benzine, or
anti-static products designed for analog records.
Do not glue paper or stickers on to a disc.
About Discs
DVD video Audio CD
Video CD/SVCD (Super Video CD)
PBC (Playback control) equipped Video CD (version 2.0
compliant).
CD-R/CD-RW
Only discs recorded in the following formats can be
reproduced.
Audio format (finalized)
Video CD format
SVCD format
MP3/WMA, JPEG discs recorded in accordance with
ISO9660 standard
DVD-R/DVD-RW
Only discs recorded in the DVD video format (finalized)
can be reproduced.
·MIX-MODE CD ·CD-G ·CD-EXTRA
·CD TEXT
·DVD-R/DVD-RW recorded in the VR format
·DVD-ROM ·CD-ROM ·PHOTO CD
·DVD+R ·DVD+RW ·DVD-RAM
·DVD audio ·SACD ·DVDR DL
8
Part Names
Front
vS-Video input port sp. 40
vRemote control light-
receiving area sp. 11
vAudio input port sp. 39, 40
vVideo input port sp. 39
vOptical Audio-Out port sp. 45
vLens cover sp. 13
vPower inlet port
sp. 13
vMain power switch
sp. 13
vAir intake vent
sp. 62
vProjection lens
vSubwoofer output port sp. 45
How to open the interface
cover
Press here to open
vComputer input port
sp. 40, 41
How to open the
interface cover
Rear
vDisplay window
sp. 14
vHeadphone jack sp. 44
vDisc tray sp. 14
vRemote control light-
receiving area sp. 11
vLamp cover opening latch
sp. 64
vSpeaker
vOpen/close button sp. 14
vSpeaker
Do not block the exhaust
vents, and do not touch the
exhaust vent immediately
after projecting, or while
projecting, since it
becomes hot.
vAir exhaust vent
9
Top
vFocus ring sp. 15
vZoom ring sp. 15
vVertical lens shift
dial sp. 15
vStatus display indicator
sp. 58
vHorizontal lens shift dial sp. 15
vLamp cover sp. 64
vSkip buttons sp. 18
vPower button
sp. 13, 16
vPlay/Pause button
sp. 14, 17
vBreak button
sp. 19
vImage On/Off button
sp. 23
vSource button
sp. 42
vStop button
sp. 16
vVolume
adjustment
buttons
sp. 15
vImage On
indicator
sp. 59
vImage Off
indicator
sp. 13, 16, 59
10
Remote control
vRemote control
light-emitting area
sp. 16
vFunction/numerics toggle switchsp. 17, 21
sp. 14
sp. 34 sp. 35
sp. 61 sp. 19
sp. 20 sp. 28
sp. 46 sp. 47
sp. 54, 56 sp. 30, 31
sp. 36 sp. 18
sp. 46 sp. 15
sp. 19
Handy functions
Buttons used when adjusting
audio
sp. 32
sp. 33
sp. 33
Buttons used when adjusting DVD
video
s
p. 42
s
p. 19
s
p. 23
Useful functions
sp. 14, 16 sp. 17, 18
sp. 17 sp. 17
sp. 18 sp. 18
sp. 16
sp. 21, 22 sp. 21, 22
sp. 48 sp. 22, 49
sp. 21
sp. 21
Buttons used during playback
sp. 56
sp. 54
sp. 54, 56
Buttons used when adjusting or
checking the projection
11
At the time of purchase, the batteries are not installed into the remote control.
Insert the batteries provided with this unit, before use.
A
Push in the catch on the rear of the remote control, then lift it
upwards.
B
Insert the batteries in their correct polarity.
C
Close the battery cover.
Preparing the Remote Control
If delays in the responsiveness of the remote control occur, or if it does not
operate after it has been used for some time, it probably means that the
batteries are becoming flat. Replace the batteries. Have two spare AA-size
(SUM-3) batteries ready to use when required.
Avoid allowing direct sunlight or fluorescent light to fall on the remote
control light-receiving area of this unit.The signal from the remote control
may not be able to be received.
Inserting the batteries
Check the positions of the (+) and (-) marks
inside the battery holder to ensure the
batteries are inserted the correct way.
Remote control usage range
7 m7 m
Approx. 30°
Approx. 30°
Approx. 30°
Approx. 30°
7 m7 m
Approx. 1
Approx. 1
Approx. 15°
Approx. 15°
Operable range (horizontal)
Operable range (vertical)
12
Quick Start
Playback procedure
No complicated connections are necessary.You don’t even need to select the television type or change the input.
You can enjoy your DVD’s on the big screen by following these four easy steps.
There is also a JVC original sound system compliant speaker built-in so you can appreciate natural, sweeter sounding
audio.
Position in front of
the screen.
sp. 13
Connect the power
cable then turn on
the main power
switch.
sp. 13
Play a disc.
sp. 14
Adjust the
projection position,
size, and volume.
sp. 15
13
Quick Start
A
Place the unit in a position to project the
best size image onto the screen.
The further this unit is moved away from the
screen, the larger the projected image becomes.
For detailed projection distance values sp. 67
You can adjust the position of the projected
image vertically and horizontally, by using the
lens shift dial. sp. 15
B
Position this unit so that it is parallel to
the screen.
Installation
Projection distance and screen size
*standard values
If this unit is not placed parallel to the screen, the
projected image is distorted in the shape of a keystone.
Screen
Connecting the power cable and turning the main power switch ON
Lit orange
Accessory
Remove the lens cover if it is attached.
At the time of purchase, the lens cover is not
attached to the projector.
Connect the power cable.
Turn on the main power switch.
and the Image Off indicator lights
orange.
14
A
Press to open the disc tray.
A beep sounds and the power comes on.
The same operation can be performed using
on the remote control.
B
Place the disc in the disc tray with the
label facing upwards.
When using 8 cm discs, place the disc in the
hollow in the center of the disc tray.
C
Press to close the disc tray.
Depending on the disc inserted, operation is as
follows.
Excluding : The projection lamp lights
automatically, and projection begins.It takes a few
seconds from when the lamp lights up until the
projected image is brightly projected.
: Press to commence audio
playback.The projection lamp does not light.
The same operation can be performed using
on the remote control.
Disc Playback
When a menu is displayed
sp. 21
sp. 22
sp. 23
When using in high altitude areas of above 1500 m,
set the “High Altitude Mode” to “On”.
sp. 57
Playing a disc and projecting
The display window during
playback
When playing
When playing
When playing
When playing
When playing
Display window
Chapter number
Elapsed playback
time
Track number
Track number
Elapsed playback
time
Track number
Elapsed playback
time
File number
Group number
15
Quick Start
Adjust the volume and image being projected.
Adjusting the projection position and volume
Adjusting the size of the
projected image (Zoom ring)
Setting the focus
(Focus ring)
Adjusting the image
position (lens shift)
You can move the position of the
projected image up, down, left and
right, using the lens shift.The range of
movement is shown in the diagram on
the right.
Adjusting the volume (Volume)
To increase the size,
turn towards “W”.
To decrease the size, turn
towards “T”.
* The clearest image is obtained when both
the horizontal and vertical planes of the lens
shift dial are centered.
moves
down
moves
up
moves
left
moves
right
Using the control
panel
Using the remote
control
Standard projection position
(when the lens shift dial is
centered)
From the standard projection
position the adjustable image
shift range
* The image cannot be
shifted beyond the
horizontal and vertical
limits.
Example)
When shifting the
maximum amount to the
left or right on the
horizontal plane, the
vertical range of the shift
is up to 36% of the height
of the image.
When shifting the
maximum amount up or
down on the vertical
plane, the horizontal
range of the shift is up to
17% of the width of the
image.
When the markings meet, the
image is centered.
16
Press .
After stopping, when
you press , playback is resumed from the
interrupted scene (resume).
A
Remove the disc from the disc tray.
B
Press .
C
If the lamp was on, the lamp turns off
and the Image Off indicator on the main
unit flashes orange (during cool-down).
“Now Cooling” is displayed in the display
window.
D
The confirmation buzzer beeps twice to
indicate that cool-down has
completed.Turn off the main power
switch.
If you only press to turn off the power,
electricity continues to be consumed.
E
Replace the lamp cover.
Keep the lens cover in place when the projector is
not being used to protect the lens from dirt and
damage.
Things to note when using resume
Even if you press and turn off the power,
playback resumes when you press .
Resume cannot be used in the following
situations.
- The disc is removed from the disc tray.
-
After pressing to turn off the power and
pressing to turn the power back on.
-
is pressed twice.
- If the main power switch is turned off.
Resume cannot be used during program playback
or random playback.
The position from where playback resumes may
be slightly different to where playback was
stopped.
The audio language, subtitle language, and angle
settings are memorized along with the stopping
position.
It is possible that resume cannot be used if the
disc is stopped when the disc menu is displayed.
Stopping playback
The Image Off indicator flashes orange to
indicate that the internal lamp cooling function
(cool-down) is taking place.The buttons on the
remote control and the main unit are disabled
when cool-down is taking place (approx. 9
seconds).
Do not turn off the power or unplug the unit during cool-
down as this may reduce the lifespan of the lamp.
Turning off the power
17
Quick Start
From here on, operations are explained primarily using the buttons of the remote control.Where there is a button with the
same marking on the main unit, that button can be used to the same effect.
Press during playback.
For the projector unit, press .
To resume playback, press .
Selects play/pause each time you press .
Press or during playback.
There are five levels of reverse/forward search
speed that change each time the buttons are
pressed.
Press to return to normal playback.
For the main unit, keep pressing or . If
you keep pressing or the reverse/
forward search speed advances from 5x to 20x.
Basic Operations During Playback
Set to the [Function] position before performing operations
Note the following points when pausing during a
slideshow.
- When you press after pausing, playback
restarts from the beginning of the next file.
- You cannot pause using on the main unit.
During forward/
reverse, sound is not output.
During forward/reverse search, sound
is output intermittently.
Temporarily freezing
playback (pause)
Reverse search/forward
search
18
Press during playback.
Press or during playback.
If you press once during chapter/track
playback, playback returns to the start of the
chapter or track being played.After this, playback
returns to the start of the previous chapter/track
each time you press (Except for
).After this, playback returns to the start
of the previous chapter/track each time you press
.
Press during paused playback.
A single frame is advanced each time you press
. This unit does not have a frame return
function.
Press to return to normal playback.
Set to the [Function] position before performing operations
Depending on the type of disc, this operation
may not be possible.
You cannot return to the previous title.
You can perform skip operations
during playback.
You can only perform
skip operations during playback with the PBC
function off.
You can also use the
buttons to skip during playback.
Depending on the disc, certain operations may
not be possible.
Reviewing playback from a
position 10 seconds before
Skip
Frame advance
19
Quick Start
A
Press at the point where you want
to begin slow motion playback. The
image will pause.
B
Press .
There are 5 levels of playback speed which
change each time is pressed.
Slow motion review can be performed
by pressing . There are 5 levels of review
speed which change each time is pressed.
Press to return to normal playback.
Sound is not output during slow motion
playback.
The break function is useful if, in the middle of a
movie, you want to get up or move around carrying a
drink, or some food, and so on. By simply pressing the
button you can pause the disc being played until
you can get up to turn the lights on in the room.
Press during playback.
The projection lamp remains lit, whilst the
projected image disappears. flashes in the
lower right of the screen.
The lamp darkens after about five minutes if the
projector is left in break mode without any
operations being made.Additionally, when about
30 minutes have elapsed, the projector power
automatically switches off.
Press to return to the state before break was
pressed.If the power has switched off, press
to switch the power back on.
You can select a picture quality to correspond to the
brightness and other conditions of your room.
A
Press .
The currently selected color mode name is
displayed on the screen.
B
While the color mode name is displayed,
press repeatedly until the desired
color mode name appears.
After waiting a few seconds, the color mode
name disappears and the picture quality changes.
When theater or theater black are selected, the
EPSON cinema filter operates automatically and
character's skin color takes on a more natural
tone across the whole image.
Press during playback.
Sound stops coming from the speakers,
headphones, and the subwoofer.
Press to return to normal playback.The
former volume is also restored when the
projector power is next switched on,
Operations cannot be performed when the disc
menu is displayed.
When you press any of the following buttons,
break mode is cancelled and the function of
the button you pressed is performed.
, , , ,
Slow motion playback
Temporarily using the projectors
light as illumination (Break)
Selecting a picture quality to suit the
conditions of the room (Color Mode)
Suitable for use in bright
rooms.
Suitable for use in rooms
with the curtains closed.
(default setting)
Suitable for use in rooms
with the curtains closed and
the lights out.
Suitable for use in
completely darkened rooms.
Temporarily stopping the
audio (Mute)
20
Advanced
Operations
Press .
Whenever you press the display window display changes as
follows. The brightness of the display window and the brightness of the
indicators on the main unit change accordingly.
Becoming a playback expert
When an is inserted, this function is not available, even when
“DIMMER AUTO” is set. It changes to “DIMMER OFF”.
When in stand-by mode, the brightness cannot be changed, even if
is pressed.
Once the brightness is changed, it is remembered even after the main
power switch is turned off.
Changing the brightness of the display window (Dimmer)
Set to the [Function] position before
performing operations
The brightness increases.
The brightness decreases.
Darkens during playback and
brightens when paused or stopped.
21
Advanced Operations
Some have the following kind of original menu saved onto them.
Top menu: When multiple titles (image and audio) have been recorded, this
integrated disc information is displayed.
Menu: Title specific playback data (chapter, angle, audio, and subtitle menus)
is displayed.
1
Press or during playback or when stopped.
2
Press and select the item you want to
see.
You can also select the title number or chapter number directly using the
numeric buttons.
3
Press .
When using the numeric buttons
With the function/numerics toggle switch in the [123] position, press the
following buttons.
Example)
5: 10:
15: 20:
25:
Once you have finished entering numbers, return the function/numerics toggle
switch back to the [Function] position.
Certain discs may not contain a menu. If a menu is not recorded, these
operations cannot be made.
Depending on the disc, playback may begin automatically, even if is
not pressed.
Playback from a DVD menu
22
If a Video CD with “PBC (playback control) enabled” specified on the disc or
jacket is inserted in the disc tray, a menu screen is displayed. You can select the
scene or information you wish to see interactively from this menu.
1
When playing a Video CD that contains PBC, the following
kind of menu is displayed.
2
Select the item you want to see using the numeric buttons.
sp. 21
The selected contents are played.
To turn to the previous/next page of the menu screen
Press / when the menu screen is displayed.
To call the menu screen during playback
Each time is pressed, the menu goes back by one step. Press repeatedly
until the menu is displayed.
To play without using the menu (playback without PBC)
Playback using either of the following methods.
When stopped, specify the track number that you want to see using the numeric
buttons.
When stopped, select the track number using / then press .
Calling the menu screen when playing back without PBC
Press or .
After pressing twice to stop playback, press .
PBC (playback control) playback
23
Advanced Operations
1
When playing back a disc that contains both MP3/WMA files
and JPEG files, the following kind of group/track (file) name
list is displayed.
2
Press and select the group.
3
When you press the pointer moves to the track (file)
name list. When you press the pointer returns to the
group name list.
4
Press and select the track.
You can also make the same selection using .
5
Press or to begin playback.
When you press for a , continuous playback begins from
the selected file (slideshow playback
*
). When you press , only the
selected file is played.
* During slideshow playback, each file is displayed for approximately 3
seconds then the next file is displayed. Once playback of all files is
completed, the slideshow stops automatically.
Track selection can also be made by entering the track number with the
numeric keys.In this case, steps 3-5 are unnecessary.
When playing back a disc on which a mixture of different file types (MP3/
WMA files and JPEG files) has been saved, select the file type to be played
from the “FILE TYPE” PICTURE settings menu.
sp. 49
When playing MP3/WMA audio (Image Off)
Once menu selection is complete and the audio begins, press . This unit beeps
and the projection lamp turns off so you can enjoy just the music being played.
Press to turn the lamp back on. Once the lamp has been turned off and when
the Image Off indicator is flashing orange, the lamp does not come back on even if
you press . Wait until the Image Off indicator goes out.
MP3/WMA, JPEG playback
Set to the [Function] position before
performing operations
“MP3/WMA, JPEG playback” Continued
24
When you want to repeat playback
1
Press during playback or when stopped.
Each time you press , the repeat mode changes as shown in the
following table.
2
Press .
Notes on playback
Depending on the recording and the characteristics of the disc it is possible that
the disc may not be readable, or that reading the disc may take some time.
The time it takes to read a disc differs depending on the number of groups or
tracks (files) recorded on the disc.
The order of the group/track (file) name list display and the order displayed on a
computer screen may be different.
When playing commercially available MP3 discs, it is possible that playback
will be in a different order to the order described on the disc.
It may take some time to play still pictures containing MP3 files. The time-
elapsed is not displayed until playback has commenced. Further, there are times
when an accurate elapsed time is not displayed, even once playback has
commenced.
It is possible that data that has been processed, edited, or saved using computer
image editing software might not play.
Set to the [Function] position before
performing operations
*MP3/WMA files only
When MP3/WMA files are recorded on the disc, repeat play can be
performed even during program play and random play.
Repeat
mode
Disc
Screen
display
Display
window
display
Group 1 Group 2
Track 1 Tra ck 2 Track A Track B
Track
repeat
*
Group
repeat
Disc repeat
Repeat
OFF
not
displayed
not
displayed
Repeat mode Screen display
Display window
display
Repeats the track chosen when repeat play was
selected
Repeats all tracks set during program play, or repeats
all tracks in random play
Repeat OFF not displayed not displayed
Repeat play position
25
Advanced Operations
Specifications of files that can be played
To playback a CD-R or CD-RW containing MP3/WMA or JPEG files with
this unit, the contents of the disc must conform to the following criteria.
MP3/WMA
File system: ISO9660 level 1 or level 2
Discs that have been recorded in the packet write (UDF) format cannot be
read.
Bitrate: MP3: 32 kbps - 320 kbps
WMA: 64 kbps - 160 kbps
Sampling frequency: 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
Filename: Half width English characters only. Must bear the “.mp3” or “.wma” file
extension. Distinction between upper and lowercase characters is not
performed.
Group (folder) count: up to 99
Track (file) count: up to 1000
Other: It is possible to playback multi-session recorded discs.
This unit is not compatible with Multiple Bit Rate (MBR : a file that contains
the same content encoded at several different bit rates).
JPEG
File system: ISO9660 level 1 or level 2
Discs that have been recorded in the packet write (UDF) format cannot be
read.
Filename: Half width English characters only. Must bear the “.jpg” or “.jpeg” file
extension. Distinction between upper and lowercase characters is not
performed.
Total number of pixels: Images containing up to 8192 x 7680 pixels can be read.
However, because it takes time to reproduce files with a resolution exceeding
640 x 480 pixels, it is recommended that images be saved at 640 x 480 pixels.
Group (folder) count: up to 99
Track (file) count: up to 1000
Other: It is possible to playback multi-session recorded discs.
Only baseline JPEG is supported.
Monochrome JPEG files cannot be read.
Progressive JPEG and motion JPEG are not supported.
JPEG data created by a digital camera and conforming to the DCF (Design
rule for Camera File system) standard is supported. When certain digital
camera functions such as automatic rotation have been used, it is likely that the
data will not comply to the DCF standard. If this is the case, playback may not
be possible.
During playback, select the chapter or track number you wish to
play by pressing the numeric buttons.
s “When using the numeric buttons” p. 21
Can be used when stopped or when playing back
with PBC off.
Can also be used when stopped.
Depending on the disc, certain operations may not be possible.
Playback by selecting the chapter or track number
26
You can playback from a specified time position. Depending on the disc, the
start point position varies as follows.
Time elapsed from the start of the title
When executing from stopped: Time elapsed from
the start of the disc
When executing during playback: Elapsed time from the start of the current
track being played
1
Press twice during playback or when stopped.
The following menu bar is projected.
This function can only be used during playback.
Cannot be used when playing back using the PBC
function.
2
Press until the pointer reaches .
3
Press .
4
Enter the time using the numeric buttons.
The start position is specified in hours/minutes/seconds. You
can leave out the minutes/seconds if desired.
The start position is specified in minutes/
seconds.
5
Press .
Entering the time
Example)
To playback from 0 hours, 23 minutes, and 45 seconds
Set the Function/Numerics toggle switch to the [123] position.
Press the numeric buttons in the order of
.
If you make a mistake, press and delete the incorrect number, then re-
enter the correct number.
Once you have finished entering the time, return the function/numerics
toggle switch back to the [Function] position.
Designated time playback (time search)
Set to the [Function] position before
performing operations
Status bar
Menu bar
27
Advanced Operations
6
Press once and the menu bar disappears.
Set the playback range (start point to end point) from the menu bar during
plackback.
1
Press twice during playback.
The following menu bar is projected.
Where possible, this function can be used during playback.
Cannot be used when playing back using the PBC
function.
2
Press until the pointer reaches .
3
Press .
4
Press then select .
You can also select other repeat modes from here.Other repeat modes
sp. 28
5
When you reach the scene or track to be the starting point of
the loop range, press .
The menu bar icon changes to .
6
When you reach the scene or track to be the end point of the
loop range, press .
The menu bar icon changes to and is displayed in the
display window of the main unit. A to B playback begins.
If the elapsed time is not displayed in the display window during
playback with , this function will not work.
It is also possible that some discs may prohibit time
searching.
The status bar is not displayed when playing back cinemascope
(letterbox) . Although functions can be set in this state, when
it is necessary to display the status bar, press to return the aspect
ratio to normal. Press to return to the former aspect ratio.
When playing back in program play or random play modes, this function
will not work.
Looping playback of a favorite scene (A-B repeat playback)
Set to the [Function] position before
performing operations
“Looping playback of a favorite scene (A-B repeat playback)” Continued
28
7
Press once and the menu bar disappears.
Depending on the type of disc, you can loop playback within a range of titles,
chapters, or tracks, as in the following table.
Press during playback.
The repeat mode changes whenever you press and the repeat mode
name and icon are displayed on the projected screen and in the display
window.
Where possible, this function can be used during playback.
Cannot be used when playing back using the PBC
function.
To cancel A to B playback
To cancel A to B play back, do one of the following operations.
Display the menu bar, select then press twice.
Press .
Turn off the power switch on the main unit.
You cannot specify a range which includes multiple titles or tracks.
A-B repeat” cannot be performed at the following times.
- During program play - During random play
- During repeat play - During PBC
The status bar is not displayed when playing back cinemascope
(letterbox) . Although functions can be set in this state, when
it is necessary to display the status bar, press to return the aspect
ratio to normal. Press to return to the former aspect ratio.
Looping playback (repeat play)
Set to the [Function] position before
performing operations
Repeat
mode
Title
Screen
display
Display
window
display
Chapter 1 Chapter 2 Chapter 3 Chapter 4
Chapter
repeat
Title repeat
Repeat
OFF
not
displayed
Repeat play position
29
Advanced Operations
Repeat modes available during program play
and random play
Canceling repeat play
Press repeatedly until ” is displayed on the screen.
Turn off the power switch on the main unit.
You cannot use the “Title repeat” function with some DVDs.
To cancel repeat, press .
Display the menu bar and move the pointer to to select repeat
play. sp. 34
Repeat mode Screen display
Display window
display
Repeats the chapter/track designated when repeat
play was selected
Repeats all tracks set during program play, or repeats
all tracks in random play
Repeat OFF
not displayed
Repeat
mode
Track 1 Tra ck 2 Track 3 Track 4
Screen
display
Display
window
display
Track repeat
Repeat all
tracks
Repeat OFF
not
displayed
Repeat play position
30
You can set titles, chapters, and tracks to playback in the order of your
preference.
1
Press when stopped.
Each time you press , the display window on the main unit changes
as follows. Press repeatedly until “PRGM” is displayed.
2
Set the order according to the following screen explanations.
s “When using the numeric buttons” p. 21
3
Press .
Playback begins according to the order you set.
Once the set playback is fully complete, playback ceases and
“Program” is displayed.
Canceling set items on the program screen individually
Set numbers are deleted one by one each time is pressed.
Canceling all set items on the program screen
Press .
Also cancelled when the power to this unit is switched off.
Resuming normal playback
When stopped, press repeatedly until the display window of the main unit
returns to its normal display state.
In this case, the contents entered in the program screen remain in memory. Program
play can be executed by pressing again and selecting “PRGM”.
A maximum of 99 titles, chapters or tracks can be selected. If you try to
enter more than 99, “FULL” is displayed.
If the total of the set playback time
exceeds 9 hours, 59 minutes and 59 seconds, “--:--” is displayed in the
display window of the main unit, however, you can continue to perform
the set order as it is.
If you press , instead of setting the chapter or track
number, “ALL” is displayed and all of the chapters and tracks contained
in that title/group are set.
If stopped during program play mode, resume play cannot be used.
Depending on the type of disc, you may not be able to use program play.
Playing in the order of your choice (program play)
Set to the [Function] position before
performing operations
Program play
Random play sp. 31
Normal playback
Normal
display
31
Advanced Operations
You can choose to play titles or chapters/tracks at random with this unit.
The playback order always changes when using random play.
1
Press when stopped.
Whenever you press the display window display changes in the
following way. Keep pressing until “RANDOM” is displayed.
2
Press .
Once one title or track has finished, another title or track is played
randomly.
Resuming normal playback
When stopped, press repeatedly until the display window of the main unit
returns to its normal display state.
Random play is cancelled if the following operations are performed.
- The disc tray is opened.
- Power to this unit is switched off.
Even if you press repeatedly during random play, you cannot skip
to the previously played content. It only returns to the start of the current
chapter/track.
If stopped during random play mode, resume play cannot be used.
Playback at random (random play)
Set to the [Function] position before
performing operations
Program play sp. 30
Random play
Normal playback
Normal
display
32
When a disc has been recorded with multiple audio signals or languages, you
can switch to the available audio signal or language of your preference.
1
Press during playback.
The current audio settings are displayed.
2
While the audio settings are displayed, press
repeatedly and select the desired setting.
Press to change the setting.
3
Wait a few seconds, or press .
You can also use the menu bar to change the setting. sp. 34
If a language code (for example AA) is displayed sp. 51
The meaning of the characters displayed during
playback is as follows.
- ST: Stereo - L: Left channel audio - R: Right channel audio
Changing the audio language
33
Advanced Operations
You can choose whether or not to display subtitles for discs that have been
recorded with subtitles. When a disc has been recorded with multiple language
subtitles, you can switch to the available language of your preference.
1
Press during playback.
The current subtitle settings are displayed.
2
While the subtitle settings are displayed, press
repeatedly and select your language/OFF. Press
and select the subtitle language.
If you press repeatedly, you can select the subtitle type
and subtitles display on/off.
3
Wait a few seconds, or press .
For discs that have been recorded with multiple camera angles, you can switch
from the main angle to a different camera angle of your preference, such as
from above, or from the right, during playback.
1
Press during playback.
The current angle is displayed.
2
While the angle is displayed, press repeatedly and
select the desired angle.
Press to change the setting.
3
Wait a few seconds, or press .
Changing the subtitles display
Changing the angle
34
1
Press twice during playback.
The following status bar and menu bar is projected.
2
Press until the pointer reaches the item you wish to
use.
3
Press .
Press once and the menu bar disappears.
When stopped, some functions may not work.
The status bar is not displayed when playing back cinemascope
(letterbox) . Although functions can be set in this state, when
it is necessary to display the status bar, press to return the aspect
ratio to normal. Press to return to the former aspect ratio.
Menu bar function list
Select the repeat mode.
sp. 28, 29
Set a time based start point.
sp. 26
only.
During playback, select the chapter number you wish to play using
the numeric buttons.
With the function/numerics toggle switch in the [123 ] position, enter
the number in the following way.
Example)
5: 10: 20:
If you make a mistake, enter the correct number once again.
Press .
Select the audio language/type.
sp. 32
Select to change the subtitles display.
sp. 33
Select the angle.
sp. 33
Making operations from the menu bar
Set to t
h
e [Funct
i
on] pos
i
t
i
on
b
e
f
ore
performing operations
35
Advanced Operations
Auto stand-by: When playback has finished or been stopped, or an operation
has not been performed for around 3 minutes, the power switches off
automatically.
Sleep timer: Once the set time has elapsed, the power switches off
automatically. You can prevent unneccesary power being consumed if you fall
asleep while watching a movie.
You cannot use auto stand-by and sleep timer at the same time.
Press .
Each time you press , the mode name displayed on the image and
in the display window changes as follows. Press repeatedly until the
desired item is displayed.
If you select something other than “A.STBY ON”, auto stand-by is
cancelled.
Setting auto stand-by
A.STBY” flashes approximately 20 seconds before the power switches off.
Changing the sleep timer
Press repeatedly and select the new time.
Checking the sleep timer setting
Once the sleep timer has been set, if you press once, the set time is displayed
in the display window and on the image.
Canceling the sleep timer
Perform either of the following operations.
Press .
Press repeatedly until “SLEEP OFF” is displayed.
Sleep timer settings are not memorized. If the power is switched off, the
sleep timer is canceled.
When in external video or computer mode, video is switched off
automatically if no signal is input and no operations are performed for 30
minutes. This function is performed regardless of the sleep timer settings.
Auto stand-by cannot be used when in external video or computer mode.
Auto stand-by does not work with discs that return to the menu once
playback has completed.
Auto-standby, goodnight timer (Sleep timer) settings
Set to the [Function] position before
performing operations
Auto stand-by is activated.
After 10 minutes have elapsed, the power
switches off.
After 150 minutes have elapsed, the power
switches off.
Sleep timer is cancelled.
36
To enjoy clearer images, enable Progressive mode.
When stopped, or when there is no disc loaded in the disc tray,
press .
Whenever you press the display window display changes in the
following way. Press until “PROGRESSIVE” is displayed.
The projector automatically recognizes the aspect suitable for the input signal,
and the image is projected at an appropriate aspect. When you want to change
the aspect yourself or if the aspect is not correct, you can change it in the
following way.
Press .
Each time you press the aspect name is displayed on the image
and the aspect changes.
The aspect for disk settings and image signals can be changed in the
following way.
For better image quality (Progressive mode)
Set to the [Function] position before
performing operations
All scan lines are displayed in one video
field. This achieves a far superior image
than interlacing.
Traditional video system. A single screen
is made up of two video fields comprising
the odd number of scan lines and the even
number of scan lines, displayed
alternately.
Changing the aspect ratio
Set to the [Function] position before
performing operations
37
Advanced Operations
When projecting by using the built-in DVD player
When projecting component video (SDTV), S-video, or composite video
images
* When projecting 525i/525p images, the aspect automatically changes as soon as the image signal changes.
When projecting component video (HDTV) images
When projecting computer images
When projecting wide panel computer images, it is fixed at normal (wide screen).
If the wide panel computer images are not projected at the correct aspect, press the button to change to an
appropriate aspect.
Screen Size Aspect
16:9
Fixed at wide (16:9)
4:3
Normal Wide Zoom
Letterbox
Zoom Normal
Screen Size Aspect
4:3 Normal Wide Zoom
Letterbox Normal Wide Zoom
Screen Size Aspect
16:9 Fixed at wide (16:9)
38
You can lock the disc tray so that small children cannot interfere with it. The
disc lock allows you to lock the tray when a disc has been inserted.
With the power turned on ( is lit green) press and hold
on the main unit, then press .
“TRAY LOCK” is displayed in the display window on the main unit,
and the disc tray is locked.
To cancel the disc tray lock, follow the same procedure.
“UNLOCKED” is displayed in the display window on the main unit,
and the disc tray becomes unlocked.
If a child turns the power on accidentally, and by some chance looks into the
lens when the lamp is on, the strong light could cause blurred vision and so on.
You can prevent such an accident by setting the child lock.
When the power supply is ON ( is lit green on the projector)
press and hold down while holding down on the
projector.
“CHILD LOCK” is displayed in the projector’s display window. Power
cannot be turned on unless the button on the projector is held down
for about five seconds.
When the child lock is set, becomes invalid. The disk tray does not
open when you press .
You can turn on the power from the remote control as usual.
Use the same procedure to cancel the child lock. “UNLOCKED” is
displayed in the projector’s display window and the child lock is
released.
Tray lock
Child lock
39
Advanced Operations
Aside from the built-in DVD player, this unit can project images by connecting to a computer or the following kind of
equipment with a video output port.
- Video recorder - Game machine - Equipment with a built in television tuner
- Video camera and so on
Composite video format
Becoming a Projection Expert
Video equipment signal format
The kind of video signal that can be output depends on the video equipment. The image quality differs
depending on the video signal format. Generally speaking, the order of quality of the image goes as follows.
1. Component video
2. S-video 3. Composite video
Check which signal system to use in the “User’s Guide” supplied with the video equipment that is being used.
Composite video may be called “Image output”.
If the equipment you are connecting has a unique connector shape, connect using the cable that came with your
equipment, or an optional cable.
Turn off connected equipment. Damage may result if you try to connect when the power is on.
Do not try to force a cable plug to fit a port with a different shape. This may damage the unit or the equipment.
Close the interface cover when you are not connecting to external video equipment or a computer.
Connecting to other video equipment, televisions, and computers
To audio out port
To Video out port
To Audio input port
Video/audio cable (commercially available)
To Video input port (yellow)
Yellow
Red
White
Output
Video
Audio
R
L
“Connecting to other video equipment, televisions, and computers” Continued
40
S-Video format
Component video format
To audio out port
To S-Video out port
S-video cable (commercially available)
RCAaudio cable
(commercially available)
To Audio
input port
To S-Video input port
Connect with the
facing downwards
White
Output
Audio
L
R
S-Video
Red
Output
Audio
L
R
To audio output port
Component video cable (commercially available)
RCA audio cable
(commercially available)
To Audio input port
White
Red
To component video cable plug
To Computer input port
Component video cable
(accessory)
Green
Blue
Red
41
Advanced Operations
Connecting with a computer
Use a cable marked “No resistance” when you use a commercially available audio cable of 2RCA stereo mini-plug.
To audio
output port
To display output port
2RCA Stereo mini-pin
audio cable
(commercially available)
To Audio input port
White
Red
To Computer input port
Computer cable
(optional accessory or commercially available)
(Mini D-Sub 15-pin
Mini D-Sub 15-pin)
42
1
Remove the lens cover if it is in place.
2
Turn on the power switch on the main unit then press .
3
Press .
The input source name is displayed on the image and in the display
window, and it switches to external video or computer mode. Check that
the image changed. Each time is pressed, it changes in the
following order.
4
Turn on the power supply for the connected equipment and
press the “Playback” or “Play” button for the video
equipment.
If the lamp was off, it comes on automatically.
After a moment, the image is projected.
To return to the standard built-in DVD player
Press . “DVD/CD” is displayed in the display window and this unit switches
back to DVD mode. You can also switch by pressing .
Projecting images from external video equipment or a computer
43
Advanced Operations
When a computer image is not projected
You can switch the output destination from the computer by holding down
and pressing (the key is usually labeled or ).
s Computer documentation
After switching, wait a few seconds for projection to start.
Depending on the computer, each time the key to change the output is
pressed, the display status may also change as follows.
Functions available when in external video or
computer mode
The following remote control buttons are available when in external video or
computer mode.
v Color Mode sp. 19 v Wide/Normal sp. 61
v Sleep sp. 35 v Sound Mode sp. 46
v DVD level sp. 47 v Break sp. 19
v Image On/Off sp. 23 v Adjusting high pitched tones sp. 46
v Mute sp. 19 v Volume sp. 15
v Information sp. 56 v Picture Quality sp. 54
Examples of Switching Output
NEC IBM
Panasonic SONY
SOTEC DELL
HP FUJITSU
TOSHIBA
Macintosh
Set mirroring or display detection. Depending on your OS you
can set them by pressing .
Computer only Screen only Both
44
Connecting commercially available headphones.
Becoming an Audio Expert
When listening with headphones, make sure the volume is not too high. You may affect your hearing in an adverse
way when listening to sounds at high volume over an extended period of time.
Don’t set the volume too high from the outset. A loud sound may be produced suddenly that may cause damage to
your headphones or your hearing. As a precaution, lower the volume before you switch off this unit then raise it
gradually after you switch it back on.
Once you have connected your headphones to the headphone jack, sound does not come from the speakers. When
connected to a subwoofer, sound also stops coming from the subwoofer.
Listening with headphones
Headphones
To jack
45
Advanced Operations
You can connect to AV amplifiers and equipment capable of making digital recordings (MD recorders, and so-on) when
they are equipped with a digital audio input port. When connecting, use a commercially available optical digital audio
cable.
You can enjoy richer more powerful bass, by connecting to the optional subwoofer.
For connection and usage instructions, refer to the “User’s Guide” provided with your subwoofer.
Subwoofer availability may vary depending on the country or area of purchase.
The signal being output from the Optical Audio-Out port is changed with the “DIGITAL AUDIO OUTPUT” setting in
the settings menu. For detailed output signal information sp. 52
The settings menu “D. RANGE COMPRESSION” setting is invalid when connecting to an amplifier with a built-in
Dolby Digital decoder. sp. 50
Connecting to audio equipment with an optical digital input
When connecting the cable, remove the black cap, align the shape, and insert firmly.
Apply the cap when not in use to prevent dust from entering the port.
MD recorder
AV amplifier
To optical digital
input port
Optical digital cable
(commercially available)
To Optical Audio-Out port
Connecting a subwoofer
To Subwoofer output port
RCA cable
(comes with the subwoofer)
Powered Subwoofer
(optional)
46
You can obtain broader more natural audio from the speakers of this unit by
activating the JVC original sound system function.
Press .
Each time you press , the mode name displayed on the image and in
the display window changes as follows. Press repeatedly until the
desired mode name is displayed.
Adjusts the volume of high pitched tones.
Available when audio is being input from external video equipment.
Each time the button is pressed, the adjustment level is displayed on the
image and in the display window and changes.
About JVC original sound system
Alpha waves are said to be the brain waves which are generated when a person is
relaxing. JVC original sound system is the alpha wave frequency fluctuation given
to the necessary variation between the left and right signals in a sound circuit (the
indirect sounds between L-R). This is called LFO modulation. The aim is to correct
the audio signal to fall easily within this median region, to produce natural
sounding audio that relaxes you simply by listening to it.
Selecting Sound Mode
Set to the [Function] position before
performing operations
Broader, more natural audio is achieved.
Sounds are more pleasant to the ear.
Canceling JVC original sound system (default
setting)
Adjusting high pitched tones
raises
lowers
47
Advanced Operations
The audio of a DVD video may be recorded at a level (volume) which is lower
than other kinds of disc. The unit's default setting recognises and plays DVDs
at a higher volume. Make the following settings if this difference bothers you.
Press during playback.
Each time you press , the mode name displayed on the image and in
the display window changes as follows. As you listen to the audio being
played, press repeatedly until the setting you want is displayed.
You can adjust the audio input level of equipment connected to the Audio port.
1
Press and switch to external video or computer
mode.
2
Press and hold for approximately 2 seconds.
Each time you press and hold , the display window display changes
as follows.
The setting is only effective when is played. Even if this
setting is changed, the output level from the Optical Audio-Out port
does not change.
This operation can also be performed when stopped or paused.
Adjusting the audio playback level
Set to the [Function] position before
performing operations
Standard
Middle
High (default setting)
Adjusting the audio input level of external audio equipment
Set to the [Function] position before
performing operations
For normal use (default setting)
Use this setting when the input level from external
equipment is too low and the audio is difficult to hear.
48
Settings and
Adjustments
The settings of this unit can be adjusted to suit the environment in which it is used.
You can select your language from the “ON SCREEN LANGUAGE” list.
1
When stopped, or when there is no disc loaded in the disc
tray, press .
The following settings menu is displayed.
2
When you press the pointer moves to the icons at the
top right, from where you can select the menu group.
3
Press and select the item to be set.
4
When you press the setting contents are displayed in
a pull-down menu.
Settings Menu Operation and
Functions
Using the settings menu
LANGUAGE settings menu
PICTURE settings menu
OTHERS settings menu
AUDIO settings menu
49
Settings and
Adjustments
5
Press and select the item, then press .
Boldface is the default.
LANGUAGE settings menu
PICTURE settings menu
When in a settings menu, to return to the previous state by one step,
Press .
Setting Item Setting Contents
MENU LANGUAGE
Select the language for the DVD video menu.
For “AA” and other language codes, see the “Language code list”.
sp. 51
These settings become available when settings have been recorded
on the disc itself. When settings have not been recorded, the setting
contents become available. If the language selected has not been
recorded on the disc, the default language for that disc is used.
AUDIO LANGUAGE
Select the language for the DVD video
soundtrack.
SUBTITLE
Select the language for the DVD video
subtitles.
ON SCREEN LANGUAGE
Select the language for displaying the menus
(Settings, Picture Quality, Information).
ENGLISH
FRENCH
GERMAN
SPANISH
Setting Item Setting Contents
PICTURE SOURCE AUTO: The image source (video/film) is determined automatically.
FILM: Suitable for film, or video images that have been recorded
with the progressive scan method.
VIDEO: Suitable for video images.
SCREEN SAVER
Select whether or not to fade out the projected
screen after a still picture has been displayed
for around 5 minutes and no operation has
been performed.
ON: Fades out.
OFF: Does not fade.
FILE TYPE
Select which format to play when a disc
containing both MP3/WMA and JPEG files is
inserted.
AUDIO: Plays only MP3/WMA files.
STILL PICTURE: Plays only JPEG files.
Once you have changed this setting, open and close the disc tray, or
switch the power off and then back on again. The change then
becomes effective.
Settings menu list
“Settings menu list” Continued
50
AUDIO settings menu
OTHERS settings menu
* The settings menu closes automatically if the password is incorrect 3 times.
Setting Item Setting Contents
DIGITAL AUDIO OUTPUT
Select the kind of output signal according to
the equipment connected to the Optical
Audio-Out port.
For detailed signal information sp. 52
PCM ONLY: Use when connected to equipment that is only
compliant with Linear PCM.
DOLBY DIGITAL/PCM: Use when connected to a Dolby Digital
Decoder or when connected to equipment with this
function.
STREAM/PCM: Use when connected to a DTS/Dolby Digital
Decoder, or when connected to equipment with these
functions.
DOWN MIX
Toggles the signal from the Optical Audio-
Out port, between “DIGITAL AUDIO
OUTPUT” and “PCM ONLY”.
The audio signal from the built-in speaker and
the headphone jack is also changed.
DOLBY SURROUND: Use when connecting to equipment with
built-in Dolby Pro-Logic decoder.
STEREO: Use when connecting to standard equipment.
D. RANGE COMPRESSION
Corrects the variation in the way we hear loud
and quiet sounds when playing back at low
volume.
Only available for DVD videos that have been
recorded in Dolby Digital.
AUTO: D. Range Compression is performed automatically.
ON: D. Range Compression is always on.
Setting Item Setting Contents
RESUME
Selects whether or not to use the resume play
feature when commencing playback again
after playback has been stopped.
ON: Activates resume play.
OFF: Playback starts from the beginning.
ON SCREEN GUIDE
Selects whether or not to display the on-screen
guide.
ON: Displayed.
OFF: Not displayed.
PARENTAL LOCK
Sets the parental lock that cuts extreme scenes
from the DVD video and replaces them with
other scenes.
COUNTRY CODE: Under normal circumstances, select GB.
sp. 53
SET LEVEL: The smaller the numerical value, the greater the
restriction. When “NONE” is selected, restriction is
not performed.
PASSWORD
*
: Make sure you set the password. The four digit
password is set using the remote control numeric
buttons (1-9,0). The password set here is input upon
playback or at the next time you make changes to
settings. If by any chance you forget the password,
input 8888.
EXIT: Exits the parental lock settings.
51
Settings and
Adjustments
Code Language Code Language Code Language Code Language
AA Afar GD Scots Gaelic MK Macedonian SN Shona
AB Abkhazian GL Galician ML Malayalam SO Somali
AF Afrikaans GN Guarani MN Mongolian SQ Albanian
AM Ameharic GU Gujarati MO Moldavian SR Serbian
AR Arabic HA Hausa MR Marathi SS Siswati
AS Assamese HI Hindi MS Malay (MAY) ST Sesotho
AY Aymara HR Croatian MT Maltese SU Sundanese
AZ Azerbaijani HU Hungarian MY Burmese SV Swedish
BABashkir HYArmenian NANauru SWSwahili
BE Byelorussian IA Interlingua NE Nepali TA Tamil
BG Bulgarian IE Interlingue NL Dutch TE Telugu
BH Bihari IK Inupiak NO Norwegian TG Tajik
BI Bislama IN Indonesian OC Occitan TH Thai
BN
Bengali
Bangla
IS Icelandic OM (Afan) Oromo TI Tigrinya
IW Hebrew OR Oriya TK Turkmen
BO Tibetan JI Yiddish PA Punjabi TL Tagalog
BR Breton JW Javanese PL Polish TN Setswana
CA Catalan KA Georgian PS Pashto, Pushto TO Tongan
CO Corsican KK Kazakh PT Portuguese TR Turkish
CS Czech KL Greenlandic QU Quechua TS Tsonga
CY Welsh KM Cambodian RM Rhaeto-Romance TT Tatar
DA Danish KN Kannada RN Kirundi TW Twi
DZ Bhutani KO Korean (KOR) RO Rumanian UK Ukranian
EL Greek KS Kashmiri RU Russian UR Urdu
EO Esperanto KU Kurdish RW Kinyarwanda UZ Uzbek
ET Estonian KY Kirghiz SA Sanskrit VI Vietnamese
EU Basque LA Latin SD Sindhi VO Volapuk
FA Persian LN Lingala SG Sangho WO Wolof
FI Finnish LO Lao SH Serbo-Croatian XH Xhosa
FJ Fijian LT Lithuanian SI Singhalese YO Yoruba
FO Faroese LV Latvian, Lettish SK Slovak ZU Zulu
FY Frisian MG Malagasy SL Slovenian
GA Irish MI Maori SM Samoan
Language code list
52
Playback Disc
“DIGITAL AUDIO OUTPUT” Settings
Stream/PCM Dolby Digital/PCM PCM Only
48 kHz, 16/20/24 bit
Linear PCM DVD video
96 kHz Linear PCM DVD video
48 kHz, 16 bit stereo linear PCM
DTS DVD video DTS bit stream 48 kHz 16 bit linear PCM
Dolby digital DVD video Dolby digital bit stream
48 kHz, 16 bit stereo linear
PCM
Audio CD Video CD SVCD 44.1 kHz, 16 bit stereo linear PCM/48 kHz, 16 bit linear PCM
DTS Audio CD DTS bit stream 44.1 kHz, 16 bit linear PCM
MP3/WMA disc 32/44.1/48 KHz, 16 bit linear PCM
“DIGITAL AUDIO OUTPUT” settings and output signals
53
Settings and
Adjustments
AD Andorra ET Ethiopia LC Saint Lucia SD Sudan
AE United Arab Emirates FI Finland LI Liechtenstein SE Sweden
AF Afghanistan FJ Fiji LK Sri Lanka SG Singapore
AG Antigua and Barbuda
FK
Falkland Islands
(Malvinas)
LR Liberia SH Saint Helena
AI Anguilla LS Lesotho SI Slovenia
AL Albania
FM
Micronesia
(Federated States of)
LT Lithuania SJ Svalbard and Jan Mayen
AM Armenia LU Luxembourg SK Slovakia
AN Netherlands Antilles FO Faroe Islands LV Latvia SL Sierra Leone
AO Angola FR France LY Libyan Arab Jamahiriya SM San Marino
AQ Antarctica FX France, Metropolitan MA Morocco SN Senegal
AR Argentina GA Gabon MC Monaco SO Somalia
AS American Samoa GB United Kingdom MD Moldova, Republic of SR Suriname
AT Austria GD Grenada MG Madagascar ST Sao Tome and Principe
AU Australia GE Georgia MH Marshall Islands SV El Salvador
AW Aruba GF French Guiana ML Mali SY Syrian Arab Republic
AZ Azerbaijan GH Ghana MM Myanmar SZ Swaziland
BA Bosnia and Herzegovina GI Gibraltar MN Mongolia TC Turks and Caicos Islands
BB Barbados GL Greenland MO Macau TD Chad
BD Bangladesh GM Gambia MP Northern Mariana Islands
TF
French Southern
Te rr i to r ie s
BE Belgium GN Guinea MQ Martinique
BF Burkina Faso GP Guadeloupe MR Mauritania TG Togo
BG Bulgaria GQ Equatorial Guinea MS Montserrat TH Thailand
BH Bahrain GR Greece MT Malta TJ Tajikistan
BI Burundi
GS
South Georgia and the
South Sandwich Islands
MU Mauritius TK Tokelau
BJ Benin MV Maldives TM Turkmenistan
BM Bermuda GT Guatemala MW Malawi TN Tunisia
BN Brunei Darussalam GU Guam MX Mexico TO Tonga
BO Bolivia GW Guinea-Bissau MY Malaysia TP East Timor
BR Brazil GY Guyana MZ Mozambique TR Turkey
BS Bahamas HK Hong Kong NA Namibia TT Trinidad and Tobago
BT Bhutan
HM
Heard Island and
McDonald Islands
NC New Caledonia TV Tuvalu
BV Bouvet Island NE Niger TW Taiwan
BW Botswana HN Honduras NF Norfolk Island
TZ
Tanzania, United
Republic of
BY Belarus HR Croatia NG Nigeria
BZ Belize HT Haiti NI Nicaragua UA Ukraine
CA Canada HU Hungary NL Netherlands UG Uganda
CC Cocos (Keeling) Islands ID Indonesia NO Norway
UM
United States Minor
Outlying Islands
CF Central African Republic IE Ireland NP Nepal
CG Congo IL Israel NR Nauru US United States
CH Switzerland IN India NU Niue UY Uruguay
CI Cote d’lvoire
IO
British Indian Ocean
Terr i to r y
NZ New Zealand UZ Uzbekistan
CK Cook Islands OM Oman
VA
Vatican City State
(Holy See)
CL Chile IQ Iraq PA Panama
CM Cameroon IR Iran (Islamic Republic of) PE Peru
VC
Saint Vincent and the
Grenadines
CN China IS Iceland PF French Polynesia
CO Colombia IT Italy PG Papua New Guinea VE Venezuela
CR Costa Rica JM Jamaica PH Philippines VG Virgin Islands (British)
CU Cuba JO Jordan PK Pakistan VI Virgin Islands (U.S.)
CV Cape Verde JP Japan PL Poland VN Viet Nam
CX Christmas Island KE Kenya
PM
Saint Pierre and
Miquelon
VU Vanuatu
CY Cyprus KG Kyrgyzstan
WF
Wallis and Futuna
Islands
CZ Czech Republic KH Cambodia PN Pitcairn
DE Germany KI Kiribati PR Puerto Rico WS Samoa
DJ Djibouti KM Comoros PT Portugal YE Yemen
DK Denmark KN Saint Kitts and Nevis PW Palau YT Mayotte
DM Dominica
KP
Korea, Democratic
People’s Republic of
PY Paraguay YU Yugoslavia
DO Dominican Republic QA Qatar ZA South Africa
DZ Algeria KR Korea, Republic of RE Réunion ZM Zambia
EC Ecuador KW Kuwait RO Romania ZR Zaire
EE Estonia KY Cayman Islands RU Russian Federation ZW Zimbabwe
EG Egypt KZ Kazakhstan RW Rwanda
EH Western Sahara
LA
Lao People’s Democratic
Republic
SA Saudi Arabia
ER Eritrea SB Solomon Islands
ES Spain LB Lebanon SC Seychelles
Country (area) code list
54
You can perform adjustments on the brightness, contrast, and other values of the projected image.
1
Press during projection.
The following menu is displayed.
2
The menu item changes as follows whenever is
pressed. Press repeatedly until the item that you want
to change is displayed.
Brightness Contrast Color Saturation Tint Sharpness
Keystone Exit Picture Quality menu
3
Press to make your adjustments.
4
When left in an unchanged state for a period of time, the
adjustment closes and the Picture Quality menu disappears.
After making the adjustment, press to display the next menu item.
Picture Quality Menu Operations and
Functions
When in a settings menu, to return to the previous setting,
Press .
Using the Picture Quality menu
55
Settings and
Adjustments
Setting Item Setting Contents
Brightness Adjusts the image brightness.
Contrast Adjusts the difference between light and shade in the images.
Color Saturation Adjusts the color saturation for the images. (This is not displayed when a computer is connected.)
Tint Adjusts the image tint. (This is not displayed when the external video or computer connected is
not NTSC.)
Sharpness Adjusts the image sharpness.
Keystone If the screen is not positioned vertically, the projected image is distorted in the shape of a
keystone. You can correct keystone distortion in the following way.
Picture Quality menu list
56
You can set the “Information” for checking the status of this unit, “Video Signal”, “High Altitude Mode”, and “Reset
Lamp Hours”.
1
Press during projection.
The following Information is displayed.
2
The menu item changes as follows whenever is
pressed. Press repeatedly until the item that you want
to confirm or change is displayed.
Information Video Signal High Altitude Mode Reset Lamp
Hours Exit Information menu
3
Press to make your adjustments.
4
When left in an unchanged state for a period of time, the
adjustment closes and the Information menu disappears.
After making the adjustment, press to display the next menu item.
Information Menu Operation and
Functions
When in a settings menu, to return to the previous setting,
Press .
Using the Information menu
57
Settings and
Adjustments
Setting Item Setting Contents
Information
Displays the
current status.
Lamp Hours: Accumulated usage time of the lamp. 0H is displayed for 0-10 hours. Displayed
in units of 1 hour for 10 hours and above. The display changes to yellow text
when it is time to change the lamp.
Source: Displays whether standard DVD player images are being projected, or images
from external video equipment or a computer are being projected.
Video Signal: This is displayed when “Video” is selected as the “Source”, and it displays the
format of the video signal being input.
Resolution: This is displayed when “Computer” is selected as the “Source”, and it displays
the resolution of the computer image signal or the component video signal being
input.
Video Signal (Only displayed when “Video” is selected as the “Source”.)
Sets the signal format of the video equipment connected to the Video input port or the S-Video
input port. At the time of purchase, this is set toAuto” so the video signal is recognized
automatically. If interference appears in the projected images or no images appear when you
select “Auto”, select the appropriate signal manually.
High Altitude
Mode
When using this unit in high altitude areas above 1500 m, select “On”.
Reset Lamp
Hours
If the lamp has been replaced, make sure you initialize this setting. The accumulated lamp
operating time is cleared.
Information menu list
58
Appendix
You can check the status of this unit using the indicators on the top
panel.
Check each condition in the following table and follow the steps
to remedy the problem.
* If all indicators are switched off, check that the power cable is
connected correctly and whether or not the main power switch
is turned on.
Troubleshooting
When flashes green / orange alternately Error
: flashing green/orange alternately
: lit : flashing : off
Internal error
Turn the main power switch off then on. If
the indicator status does not change once
has been pressed and the power
switched on
Fan related error/Sensor error
High temperature error
(overheating)
The lamp turns off automatically and
projection stops. After being in this state
for around 40 seconds and then entering
stand-by mode, check the 2 items listed
to the right.
If the power was turned off, turn the main
power switch back on again.
Move this unit away from
the wall by at least 20 cm.
Clean the air filter.
sp. 62
If the indicator status
does not change
once has been
pressed and the
power turned on
Lamp error/Lamp fails to light up/Lamp cuts out /Lamp cover open
Check if the lamp is broken.sp. 64
Clean the air filter and the air intake vent.
sp. 62
The lamp is not broken
Reinsert the lamp then turn on the main power
switch on the main unit and press .
If the condition is not
fixed once the lamp
is re-inserted
The lamp is broken
Contact your dealer. sp. 74
Reading the indicators
Red
Red
Disconnect the power cable from the electrical
outlet and contact your dealer.
sp. 74
Red
Red
Red
59
Appendix
When the or indicators flash orange Warning
: lit : flashing : off
High-speed cooling in
progress
You can continue projecting in
this state. Projection stops
automatically if subsequent
high temperatures are
registered.
Check the 2 items listed to the
right.
Move this unit away from the
wall by at least 20 cm.
Clean the air filter.
sp. 62
If there is no improvement
when you press and
switch the power on,
discontinue use and
disconnect the power cable
from the electrical outlet.
Contact your dealer.
sp. 74
Lamp replacement notification
It is time to replace the lamp. Replace the lamp with a new one as soon as possible.
If you continue use when in this state, it is possible that the lamp may explode.
sp. 64
When the or indicators are off Normal
: lit : flashing : off
Standing-by
Shows that this unit is ready to be used.
Warming up
(approx. 20 seconds)
In warm-up mode pressing or has no effect.
Do not turn off the power or unplug the unit during warm-up, as this
may reduce the lifespan of the lamp.
Projection in
Progress
Cooling down
(approx. 9 seconds)
The operation of all remote control and main unit buttons is suspended
during cool-down.
Enters stand-by mode once cool-down has completed.
Do not turn off the power or unplug the unit during cool-down, as this
may reduce the lifespan of the lamp.
Break
Press to return to normal playback.
Orange
Green
Orange
Green
OrangeOrange
Green GreenGreen
Green GreenGreen
Green Orange
Green GreenGreen
60
If this unit is not functioning normally, check the following notes before requesting repairs. However, if the unit fails to
improve, contact your dealer for advice.
At these times Check here
Reference
page
Power does not turn on Is the main power switch in the on position? sp. 13
Disconnect and reconnect the power cable. sp. 13
Is the projector cooling down? sp. 59
If the indicator goes on and off when you touch the power cable, turn
off the main power switch then disconnect and reconnect the power
cable. If the unit fails to improve, it is possible that the power cable
has been damaged. Stop using the projector, disconnect the power
cable from the electrical outlet, and contact your dealer.
sp. 74
Is the Child Lock set? sp. 38
No images appear Is the Image Off indicator lit orange? sp. 23
You cannot play DVD videos if the disc region code does not
correspond to the region code label on the side of this unit.
sp. 7
Press to switch to DVD.
sp. 42
Is the lamp spent? sp. 58
Images are fuzzy or out of
focus
Has the focus been adjusted? sp. 15
Is the lens cover in place? sp. 13
Is the projector at the correct distance? sp. 67
Could there be condensation? sp. 5
Images appear dark Is the color mode appropriate to the usage environment? sp. 19
Is the lamp due for replacement? sp. 63
Is the screensaver running? sp. 49
The remote control does not
work
Is the Function/Numerics toggle switch in the [1 2 3] (numerical
input) position?
sp. 21
Depending on the disc, certain operations are prohibited. -
Are the batteries dead, or have the batteries been inserted correctly? sp. 11
No sound can be heard or
the sound is faint.
Has the volume been adjusted to the minimum setting? sp. 15
Is mute mode active? Press .
-
Is the DVD level setting set to “DVD LEVEL 1”? sp. 47
The audio distorts Is the volume too loud? sp. 15
The audio/subtitle language
cannot be changed
If multiple languages are not recorded on the disc, they cannot be
changed.
-
Depending on the disk, there are some types that can only be changed
from the DVD menu.
-
Subtitles do not appear If there are no subtitles on the disc, they are not displayed. -
Is the subtitle language set to “OFF”? sp. 33
When using A-B repeat, subtitles may not be displayed before and
after point A and point B.
-
When the indicators provide no help
61
Appendix
When using external video or computer mode
At these times Check here
Reference
page
No images appear Is the power for the connected equipment turned on?
Switch on the power to the connected equipment, or start playback
depending on the playback method for the connected equipment.
sp. 42
When signals have been connected to both the S-Video input port and
the Video input port, only the S-Video signal is available. If you want
to watch the image from the equipment connected to the Video input
port, disconnect the cable from the S-Video input port.
-
“Signal not supported” is
displayed
When external video equipment is connected
If you cannot project even when the “Video Signal” is set to “Auto” in
the Information menu, set to the signal format appropriate to the
equipment.
sp. 57
When a computer is connected
Are the resolution and refresh rate modes for the image signal
compatible with the projector?
Use the computer’s manual and so on to check and change the
resolution and the refresh rate for the image signal being output by
the computer.
sp. 68
“No signal.” is displayed Are the cables connected correctly? sp. 39, 40
Is the power to the connected equipment turned on?
Turn on the power for the connected equipment. Press the playback
button according to the connected video equipment.
sp. 42
Is a laptop computer or a computer with a built-in LCD screen
connected?
Change the image signal's output destination from the computer.
sp. 42
Press to switch to DVD.
sp. 42
The signal is distorted If an extension cable is used, electrical interference may affect the
signals. Connect amplification equipment and check.
-
Is the computer’s image signal resolution mode compatible with the
projector?
Use the computer’s manual and so on to check and change the
resolution for the image signal being output by the computer.
sp. 68
Press the button on the remote control if interference or
flickering appear in the computer image being projected. “Running
Auto Setup…” is displayed and synchronization, tracking, and
position are automatically adjusted.
-
Image is truncated (large) or
small
The unit automatically recognizes and projects the aspect ratio for the
input signal. If the aspect ratio is not projected correctly, press
and select the aspect ratio appropriate to the input signal.
sp. 36
Press the button on the remote control if part of the computer
image being projected is missing. “Running Auto Setup…” is
displayed and synchronization, tracking, and position are
automatically adjusted.
-
Image colors are not right In the Information menu, set the “Video Signal” to the signal format
appropriate to the equipment.
sp. 57
Moving images being
played back by the
computer become black
Change the computer’s image signal to external output only.
s Check the “User’s Guide” supplied with the computer for more
information, or inquire to the computer’s manufacturer.
-
62
This section describes maintenance tasks such as cleaning the projector and replacing consumable parts.
Cleaning the air filter and air
intake vent
When dust builds up on the air filter or the air intake
vent, or the message “The projector is overheating.
Make sure nothing is blocking the air vents, and clean or
replace the air filter” is displayed, remove any dust from
the air filter and the air intake vent using a vacuum
cleaner.
Cleaning the main unit
Cleaning the projection lens
Maintenance
If dust collects on the air filter or the air intake vent it can
cause the internal temperature of the projector to rise, and
this can lead to problems with operation and shortening of
the optical engines service life. It is recommended that you
clean these parts at least once every three months. Clean
them more often than this if using the projector in
particularly dusty environments.
Clean the surface by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth
with water containing a small amount of neutral
detergent, and then firmly wring the cloth dry before
using it to wipe the projector’s surface. Then wipe it
again with a soft, dry cloth.
Do not use volatile substances such as wax, alcohol, or thinner
to clean the projector's surface. These can cause the projector
to warp and make the coating finish peel off.
Use a commercially available cloth for cleaning glasses
to gently wipe the lens.
Do not rub the lens with harsh materials or subject the lens to
shocks, as it can easily become damaged.
Cleaning
63
Appendix
Air filter replacement period
When the air filter gets dirty or is broken
Replace it with the optional air filter. s “Optional Accessories and Consumables” p. 66
Lamp replacement period
The message “Replace the lamp” appears on the screen when projection starts.
The projected image gets darker or starts to deteriorate.
In order to maintain the initial brightness and image quality, the lamp replacement message is displayed after about 1900
hours of use has passed. The time at which this message is displayed will vary depending on the color mode settings and
the conditions under which this unit has been used.
If you continue to use the lamp after this period, the possibility of the lamp breaking becomes greater. When the lamp
replacement message appears, replace the lamp with a new one as soon as possible, even if it is still working.
Depending on the characteristics of the lamp and on the way it has been used, the lamp may become darker or stop
working before the lamp warning message appears. You should always have a spare lamp ready in case it is needed.
Contact your dealer for a spare lamp.
Consumables replacement period
64
How to replace consumables
Replacing the air filter
Replacing the lamp
The lamp is hot immediately
after use. Once the power has
been switched off, allow
approximately one hour to
pass before replacing the
lamp to allow it to cool
thoroughly.
Once the power
has turned off, cool-
down has
completed, and the
projector has
beeped twice, turn
off the main power
switch.
Remove the air filter
cover.
Once the power has
turned off, cool-
down has
completed, and the
projector has
beeped twice, turn
off the main power
switch.
Remove the lamp cover by
inserting the screwdriver
that came with the
replacement lamp into the
lamp cover opening latch.
Tighten the lamp
attachment screws
firmly.
Install the lamp cover.
Resetting the lamp operating time
After the lamp has been
replaced, make sure you
initialize the Lamp Hours
setting.
The projector has a built-in
counter that keeps track of the
lamp operating time and the
lamp replacement message is
displayed based on this counter.
Turn on the main
power switch on the
main unit then
press . If the
lamp is not lit, press
.
If you press
repeatedly during
projection, “Reset Lamp
Hours” is displayed.
Place your finger
in the hollow and
lift upwards.
Dispose of used air
filters properly in
accordance with your
local regulations.
Filter: Polypropylene
65
Appendix
Take out the old air
filter.
Install the new air
filter.
Install the filter
cover.
Loosen the lamp
attachment screws.
Take out the old lamp.
If replacing the lamp
yourself, be careful to
avoid pieces of
broken glass.
Install the new
lamp.
Install the lamp and the lamp cover securely. For the safety of this unit, the lamp
will not turn on if the lamp or the lamp cover is not installed correctly.
This product includes a lamp component that contains mercury (Hg).
Please consult your local regulations regarding disposal or recycling. Do not
dispose of it with normal waste.
Press and select
“Yes”. Reset is performed
when you press .
66
The following optional accessories and consumables are available for purchase if required. This list of optional
accessories is current as of August, 2006. Details of accessories are subject to change without notice and availability may
vary depending on the country or area of purchase.
Consumables
Optional accessories
Optional Accessories and
Consumables
Lamp unit ELPLP33
(Lamp x1)
Use as a replacement for used lamps.
Air filter set ELPAF09
(Air filter x1)
Use as a replacement for used air filters.
50” portable screen ELPSC06
60” portable screen ELPSC07
80” portable screen ELPSC08
100” screen ELPSC10
A compact screen which can be carried easily.
(Aspect ratio 4:3)
HD-15 cable ELPKC02
(1.8 m - for mini D-Sub 15-pin/mini D-Sub 15-pin)
HD-15 cable ELPKC09
(3 m - for mini D-Sub 15-pin/mini D-Sub 15-pin)
HD-15 PC cable ELPKC10
(20 m - for mini D-Sub 15-pin/mini D-Sub 15-pin)
Use to connect the projector to a computer.
80” spring roller screen ELPSC15
A roll-up screen.
(Aspect 16:9)
Component video cable ELPKC19
(3 m - for mini D-Sub 15-pin/RCA male x 3)
Use to connect a component video source.
Screen stand ELPSCST01
A stand for the 80” spring roller screen.
Powered subwoofer ELPSP01
Enjoy richer, more powerful bass.
67
Appendix
Refer to the following table and place the unit in a position which allows the best possible projection for the size of the
screen.
Units: cm (in.) Units: cm (fit.)
Units: cm (in.) Units: cm (fit.)
Projection Distance and Screen Size
16:9 Screen Size
Projection Distance
Minimum Maximum
(Zoom Adjustment Wide) - (Zoom Adjustment Tele)
30” 66 x 37 (26 x 15) 73 - 111 (2.4 - 3.7)
40” 89 x 50 (35 x 20) 99 - 149 (3.2 - 4.9)
60” 130 x 70 (51 x 28) 149 - 225 (4.9 - 7.4)
80” 180 x 100 (71 x 39) 200 - 301 (6.6 - 9.9)
100” 220 x 120 (87 x 47) 251 - 377 (8.2 - 12.4)
120” 270 x 150 (106 x 59) 301 - 453 (9.9 - 14.9)
150” 330 x 190 (130 x 75) 377 - 567 (12.4 - 18.6)
4:3 Screen Size
Projection Distance
Minimum Maximum
(Zoom Adjustment Wide) - (Zoom Adjustment Tele)
30” 61 x 46 (24 x 18) 90 - 136 (2.9 - 4.5)
40” 81 x 61 (32 x 24) 121 - 183 (4.0 - 6.0)
60” 120 x 90 (47 x 35) 183 - 276 (6.0 - 9.0)
80” 160 x 120 (63 x 47) 245 - 369 (8.0 - 12.1)
100” 200 x 150 (79 x 59) 307 - 462 (10.1 - 15.2)
120” 240 x 180 (94 x 71) 369 - 555 (12.1 - 18.2)
150” 300 x 230 (118 x 91) 462 - 694 (15.1 - 22.8)
68
Composite video/S-video Units: Dots
* Letterbox signal
Component video Units: Dots
* Letterbox signal
Computer image Units: Dots
* You cannot connect to models where the VGA output port is not installed.
You can project signals that conform to the VESA standard.
Even when signals other than those mentioned above are input, it is likely that the image can be projected.
However, not all functions may be supported.
Compatible Resolution List
Signal Resolution
Aspect Mode
Normal Wide Zoom
TV (NTSC)
720 x 480
720 x 360*
640 x 480
(4:3)
854 x 480
(16:9)
854 x 480
(16:9)
TV (PAL, SECAM)
720 x 576
720 x 432*
640 x 480
(4:3)
854 x 480
(16:9)
854 x 480
(16:9)
Signal Resolution
Aspect Mode
Normal Wide Zoom
SDTV (525i, 60Hz)
720 x 480
720 x 360*
640 x 480
(4:3)
854 x 480
(16:9)
854 x 480
(16:9)
SDTV (625i, 50Hz)
720 x 576
720 x 432*
640 x 480
(4:3)
854 x 480
(16:9)
854 x 480
(16:9)
SDTV (525p)
720 x 480
720 x 360*
640 x 480
(4:3)
854 x 480
(16:9)
854 x 480
(16:9)
SDTV (625p)
720 x 576
720 x 432*
640 x 480
(4:3)
854 x 480
(16:9)
854 x 480
(16:9)
HDTV (750p) 16:9 1280 x 720
854 x 480
(16:9)
--
HDTV (1125i) 16:9 1920 x 1080
854 x 480
(16:9)
--
Signal Resolution
Aspect Mode
Normal Wide Zoom
VGA 60/72/75/85,
iMac*
640 x 480 640 x 480 854 x 480 854 x 480
SVGA56/60/72/75/85/,
iMac*
800 x 600 640 x 480 854 x 480 854 x 480
XGA60/70/75/85,
iMac*
1024 x 768 640 x 480 854 x 480 854 x 480
MAC13” 640 x 480 640 x 480 854 x 480 854 x 480
MAC16” 832 x 624 640 x 480 854 x 480 854 x 480
MAC19” 1024 x 768 640 x 480 854 x 480 854 x 480
69
Appendix
Pixelworks DNX
TM
IC is installed in this unit.
Specifications
Product name EMP-TWD3
Dimensions 340(W) x 180(H) x 310(D) mm (excluding feet)
Panel size 0.55” wide
Display method Polysilicon TFT active matrix
Resolution 409,920 pixels (854 (W) x 480 (H)dots) x 3
Focus adjustment Manual
Zoom adjustment Manual (approx. 1:1.5)
Lens shift Manual (vertical maximum approx. 50%, horizontal maximum approx. 25%)
Lamp (light source) UHE lamp, 135 W, Model No.: ELPLP33
Power supply
100-240VAC 50/60 Hz 2.6 to 1.2 A
Power Consumption
Operating: 230 W (100 to 120 V area), 220 W (220 to 240 V area)
Standby: 6 W (100 to 120 V area), 9 W (220 to 240 V area)
Operating altitude 0 to 2,286 m (0 to 7,500 ft)
Operating temperature +5 to +35°C (No condensation)
Storage temperature -10 to +60°C (No condensation)
Weight Approximately 7.0kg
Connectors
Input
Audio port 1 RCA pin jack
S-Video port 1 Mini DIN 4-pin
Video port 1 RCA pin jack
Computer port 1 Mini D-Sub 15-pin
Output
Subwoofer port 1 RCA pin jack
Optical Audio-Out port 1 Square optical jack
Headphone jack 1 3.5mm mini-jack
Speaker
Output sound wave pressure level 79.5 dB/Wm
Maximum input (JIS) 10W Rated impedance 4
Audio output
Analog audio
output
1 speaker system: Practical, maximum output 10W + 10W
(10% THD JEITA/4)
1 headphone system: 12 mW/32
Acceptable impedance 16 to 1k
1 subwoofer system (L+R): 0.25 Vrms/27 k
Dynamic range 70 dB (JEITA) or more
Total harmonic distortion rate 0.5% (JEITA) or less
Digital audio
output
Light: -21dBm to -15 dBm
Readable disc types
DVD video, Video CD, SVCD, Audio CD, CD-R/RW (Audio CD, Video CD, SVCD, MP3/
WMA, JPEG format), DVD-R/RW (DVD video format)
70
Safety standards
USA
UL60950-1
Canada
CSA C22.2 No.60950-1
EU
The Low Voltage Directive
(73/23/EEC)
IEC/EN60950-1
EMC standards
USA
FCC Part 15B Class B (DoC)
Canada
ICES-003 Class B
EU
The EMC Directive
(89/336/EEC)
EN55022, Class B
EN55024
IEC/EN61000-3-2
IEC/EN61000-3-3
Australia/New Zealand
AS/NZS CISPR 22:2002 Class B
71
We : Epson America, INC.
Located at : 3840 Kilroy Airport Way
MS: 3-13
Long Beach, CA 90806
Tel : 562-290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the
FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested
and found to be compliant with the standards. Records maintained continue to reflect the equipment being
produced can be expected to be within the variation accepted, due to quantity production and testing on a
statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions : (1) this
device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Trade Name : Epson
Type of Product : Projector
Model : EMP-TWD3
FCC Compliance Statement
For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio or television reception. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause interference to radio and television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
WARNING
The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC
Certification or Declaration of this device and may cause interference levels which exceed the limits
established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded
equipment interface cable with this device. If this equipment has more than one interface connector, do not
leave cables connected to unused interfaces. Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
DECLARATION of CONFORMITY
According to 47CFR, Part 2 and 15
Class B Personal Computers and Peripherals; and/or
CPU Boards and Power Supplies used with Class B
Personal Computers
72
Aspect ratio
The ratio between an image's length and its height. HDTV
images have an aspect ratio of 16:9 and appear elongated. The
aspect ratio for standard images is 4:3.
Cool-down
A process to enable the lamp to cool down from the high
temperatures attained during projection. Performed
automatically when this unit is turned off. Do not remove the
power plug during cool-down. If cool-down is not performed
correctly, the lamp or internal structure of the main unitcan
overheat which may reduce the lifespan of the lamp or cause
damage to this unit. Cool-down is complete once the main unit
beeps twice.
Dynamic Range
Shows the ratio of minimum and maximum audio level values
recorded to a disc in decibels (dB). The dynamic range values
indicate what detailed signals can be reproduced by various
equipment.
JPEG
A file format used for saving image files. Most photographs
taken with digital cameras are saved in the JPEG format.
MP3
The abbreviated form of “MPEG1 Audio Layer-3”, a standard
for audio compression. It enables the size of the data to be
greatly reduced, whilst maintaining a high sound quality.
NTSC
The abbreviated form of the “National Television Standards
Committee”, and given to one of the analog color television
wave transmission systems. This system is used in Japan, the
USA and Latin America.
Optical digital out
Converts the audio signal into a digital signal and enables it to
be transmitted along optical fiber. An advantage is that
interference is not produced, unlike conventional means, where
external interference is picked up by the cable.
PAL
The abbreviated form of “Phase Alteration by Line”, and given
to one of the analog color television wave transmission
systems. This system is used in China, Western Europe, with
the exception of France, and in other African and Asian
countries.
Parental Lock
For age restriction. There are also display level settings for
when a DVD video contains material which is undesirable for
viewers of a young age.
Playback control (PBC)
A method for playing back Video CDs. You can select the
screen or information you want to see from the menu screen
displayed.
SECAM
The abbreviated form of “SEquential Couleur A Memoire”,
and given to one of the analog color television wave
transmission systems. This system is used in France, Eastern
Europe, the former Soviet Union, the Middle East and some
African nations.
WMA
The abbreviated form of “Windows Media Audio”, an audio
compression technology developed by the Microsoft
Corporation of America. You can encode WMA data using
Windows Media Player Ver.7, 7.1, Windows Media Player for
Windows XP, or the Windows Media Player 9 Series.
Windows Media and the Windows logo, are trademarks or
registered trademarks of the Microsoft Corporation of
America, in America and in other countries.
When encoding WMA files, please use applications that have
been certified by the Microsoft Corporation of America. If you
use an application that has not been certified, it is possible that
it may not operate correctly.
Disc related terms
Title/Chapter/Track
One movie on a DVD is divided into units called titles, which
may contain any number of chapters. Video and Audio CDs are
divided into units called tracks.
Glossary
Title 1 Title 2
Chapter 1 Chapter 2 Chapter 1 Chapter 2
Track 1 Track 2 Track 3 Track 4
Video CD/Audio CD
DVD video
73
A
A.STBY .................................................................................... 35
Air exhaust vent
.......................................................................... 8
Air intake vent
............................................................................ 8
Angle
........................................................................................ 33
Aspect ratio
........................................................................ 61, 72
Audio input level
...................................................................... 47
AUDIO settings menu
.............................................................. 50
Auto setup
................................................................................. 61
B
Break ......................................................................................... 19
Brightness
................................................................................. 55
C
Chapter ...................................................................................... 72
Child lock
................................................................................. 38
Cleaning the air filter
................................................................ 62
Cleaning the lens
...................................................................... 62
Cleaning the main unit
.............................................................. 62
Color Mode
............................................................................... 19
Color Saturation
........................................................................ 55
Computer input port
........................................................... 40, 41
Consumables
............................................................................. 66
Contrast
..................................................................................... 55
D
D. RANGE COMPRESSION ................................................... 50
DIGITAL AUDIO OUTPUT
................................................... 50
Dimmer
..................................................................................... 20
Display window
........................................................................ 14
Dolby Digital
............................................................................ 50
DOWN MIX
............................................................................. 50
DVD level
................................................................................. 47
F
File ............................................................................................ 23
FILE TYPE
............................................................................... 49
Focus adjustment
...................................................................... 15
G
Group (folder) ........................................................................... 23
H
Headphones .............................................................................. 44
High Altitude Mode
.................................................................. 57
How to replace the batteries
..................................................... 11
I
Image On/Off (listen to music only) ......................................... 23
Indicator
.................................................................................... 58
Information
............................................................................... 57
Input Signal
............................................................................... 57
J
JPEG ......................................................................................... 23
K
Keystone ................................................................................... 55
L
Lamp replacement period ..........................................................63
Lamp-Hours
..............................................................................57
LANGUAGE settings menu
.....................................................49
Lens shift
...................................................................................15
M
Main power switch ....................................................................13
Menu
.........................................................................................21
Menu bar
...................................................................................34
MP3
...........................................................................................23
Mute
..........................................................................................19
O
ON SCREEN GUIDE ...............................................................50
ON SCREEN LANGUAGE
.....................................................49
Optional accessories
..................................................................66
OTHERS settings menu
............................................................50
Overheating
...............................................................................58
P
PARENTAL LOCK ..................................................................50
PBC (playback control)
.............................................................22
PICTURE settings menu
...........................................................49
PICTURE SOURCE
.................................................................49
Power inlet port
...........................................................................8
R
Remote control ..........................................................................10
Replacing the air filter
...............................................................64
Replacing the lamp
....................................................................64
Resetting the lamp operating time
.............................................64
RESUME
...................................................................................50
S
SCREEN SAVER .....................................................................49
Sharpness
...................................................................................55
Slideshow playback
...................................................................23
Source
........................................................................................57
Standing-by
...............................................................................59
Status bar
...................................................................................26
SVCD
..........................................................................................7
S-Video input port
.....................................................................40
T
Tint ............................................................................................55
Title
...........................................................................................72
Track
.........................................................................................72
Tray lock
...................................................................................38
TV tuner
....................................................................................39
V
Video input port ........................................................................39
Video Signal
..............................................................................57
Volume
......................................................................................15
Z
Zoom adjustment .......................................................................15
Index
74
This address list is current as of the 17th of February 2006.
A more up-to-date contact address can be obtained from the corresponding website listed here. If you do not find what
you need on any of these pages, please visit the main EPSON home page at www.epson.com.
< EUROPE, MIDDLE EAST & AFRICA >
Inquiries
ALBANIA :
INFOSOFT SYSTEM
Gjergji Center, Rr Murat Toptani
Tirana
04000 – Albania
Tel.: 00 355 42 511 80/ 81/ 82/ 83
Fax.: 00355 42 329 90
Web:http://content.epson.it/about/
int_services.htm
AUSTRIA :
EPSON DEUTSCHLAND
GmbH
Buropark Donau
Inkustrasse 1-7 / Stg. 8 / 1. OG
A-3400 Klosterneuburg
Tel.: +43 (0) 2243 - 40 181 - 0
Fax.: +43 (0) 2243 - 40 181 - 30
Web: http://www.epson.at
BELGIUM :
EPSON DEUTSCHLAND
GmbH
Branch office Belgium
Belgicastraat 4 – Keiberg
B-1930 Zaventem
Tel.:+32 2/ 7 12 30 10
Fax.:+32 2/ 7 12 30 20
Hotline: 070 350120
Web: http://www.epson.be
BOSNIA AND
HERZEGOVINA, :
RECOS d.o.o.
Tvornicka 3 - 71000 Sarajevo
Tel.: 00 387 33 767 330
Fax.: 00 387 33 454 428
http://content.epson.it/about/
int_services.htm
BULGARIA :
EPSON Service Center
Bulgaria
c/o Computer 2000 Bulgaria Ltd.
87, Slatinska Str. 1574 Sofia
Tel.: 00359 2 971 2386
Fax.: 00359 2 971 3981
Web: http://www.epson.bg
CROATIA :
RECRO d.d.
Avenija V. Holjevca 40
10 000 Zagreb
Tel.: 00385 1 3650774
Fax.: 00385 1 3650798
Web:http://content.epson.it/about/
int_services.htm
CYPRUS :
TECH-U
75, Lemesou Avenue
2121 Cyprus
Tel.: 00357 22 69 4000
Fax.: 00357 22490240
Web:http://content.epson.it/about/
int_services.htm
CZECH REPUBLIC :
EPSON DEUTSCHLAND
GmbH
Branch Office Czech
Republic
Slavickova 1a
63800 Brno
Product information and technical
support
Tel.:+420 548 427 8 11
Fax.:+420 548 427 8 16
email: infoline@epson.cz
Web: http://www.epson.cz
Hotline: 800 142 052
DENMARK :
EPSON Denmark
Generatorvej 8 C
2730 Herlev
Tel.: 44508585
Fax.: 44508586
Email: denmark@epson.co.uk
Web: http://www.epson.dk
Hotline: 70279273
ESTONIA :
EPSON Service Center
Estonia
c/o Kulbert Ltd.
Saeveski 2
11214 Tallinn
Tel.: 00372 671 8160
Fax.: 00372 671 8161
Web: http://www.epson.ee
FINLAND :
Epson (UK) Ltd
Rajatorpantie 41 C
FI-01640 Vantaa
Web: http://www.epson.fi
Hotline. : 0201 552091
FRANCE & DOM-TOM
TERRITORY :
EPSON France S.A.
68 Bis rue Marjolin,
92305 Levallois-Perret
Web: http://www.epson.fr
Hotline: 0821017017
GERMANY :
EPSON Deutschland GmbH
Otto-Hahn-Strasse 4
D-40670 Meerbusch
Tel.: +49-(0)2159-538 0
Fax.: +49-(0)2159-538 3000
Web: http://www.epson.de
Hotline: 01805 2341 10
GREECE :
EPSON Italia s.p.a.
274 Kifisias Avenue –
15232 Halandri
Greece
Tel: +30 210 6244314
Fax: +30 210 68 28 615
Email: epson@information-center.gr
Web.: http://content.epson.it/about/
int_services.htm
75
HUNGARY :
Epson Deutschland GmbH
Magyarorszagi Fioktelep
1117 Budapest
Inforpark setany 1.
Tel: +36 1 382 7680
Fax: +36 1 382 7689
Web: www.epson.hu
IRELAND :
Epson (UK) Ltd.
Campus 100, Maylands Avenue
Hemel Hempstead
Herts
HP2 7TJ
U.K.Techn.
Web: www.epson.ie
Hotline: 01 679 9015
ITALY :
EPSON Italia s.p.a.
Via M. Vigano de Vizzi, 93/95
20092 Cinisello Balsamo (MI)
Tel :+39 06. 660321
Fax:+39 06. 6123622
Web: www.epson.it
Hotline: 02 26830058
LATVIA :
EPSON Service Center
Latvia
c/o ELKO Vecriga
Rupnicecibas str. 27
1045 Riga
Tel.: 00371 7 35 76 80
Fax.: 00371 7 35 76 66
Web: www.epson.lv
LITHUANIA :
EPSON Service Center
Lithuania
c/o Baltic Amadeus
Akademijos Str. 4
08412 Vilnius
Tel.: 00370 527 804 20
FAX: 00372 527 804 22
Web: www.epson.lt
LUXEMBURG :
EPSON DEUTSCHLAND
GmbH
Branch office Belgium
Belgicastraat 4 – Keiberg
B-1930 Zaventem
Tel.:+32 2/ 7 12 30 10
Fax.:+32 2/ 7 12 30 20
Hotline: 0900 43010
Web: http://www.epson.be
MACEDONIAN :
DIGIT COMPUTER
ENGINEERING
3 Makedonska brigada b.b upravna
zgrada R. Konkar - 91000 Skopje
Macedonia
Tel.: 00389 2 2463896
Fax.: 00389 2 2465294
Web.: http://content.epson.it/about/
int_services.htm
NETHERLANDS :
EPSON DEUTSCHLAND
GmbH
Branch office Netherland
J. Geesinkweg 501
NL-1096 AX Amsterdam-
Duivendrecht
Netherlands
Tel.:+31 20 592 65 55
Fax:+31 20 592 65 66
Hotline: 0900 5050808
Web: http://www.epson.nl
NORWAY :
EPSON NORWAY
Lilleakerveien 4 oppgang 1A
N-0283 Oslo
NORWAY
Hotline: 815 35 180
Web: http://www.epson.no
POLAND :
EPSON DEUTSCHLAND
GmbH
Branch Office Poland
ul. Bokserska 66
02-690 Warszawa
Poland
Hotline: (0048)- (0) 801-646453
Web: http://www.epson.pl
PORTUGAL :
EPSON Portugal
R. Gregorio Lopes, nº 1514
Restelo
1400-195 Lisboa
Tel.:213035400
Fax.: 213035490
Hotline: 707 222 000
Web: http://www.epson.pt
ROMANIA :
EPSON Service Center
Romania
c/o MB Distribution
162, Barbu Vacarescu Blvd., Sector 2
71422 Bucharest
Tel.: 0040 21 231 7988 ext.103
FAX: 0040 21 230 0313
Web: http://www.epson.ro
SERBIA AND
MONTENEGRO :
BS PROCESSOR d.o.o
Hazdi Nikole Zivkovica 2
Beograd - 11000 - F.R. Jugoslavia
Tel.: 00 381 11 328 44 88
Fax.: 00 381 11 328 18 70
Web: http://content.epson.it/about/
int_services.htm
SLOVAKIA :
EPSON Service Center
Slovakia
c/o ASC – SK, s.r.o.
Karpatska 3
811 05 Bratislava
Tel.: 00421 (0)2 5262 5231
FAX: 00421 (0)2 5262 5232
Hotline: 0850 111 429 (national costs)
Web: http://www.epson.sk
SLOVENIA :
AVTENTA SERVIS d.o.o.
Smartinska 106
1000 Ljubljana Slovenja
Tel.: 00 386 1 5853 410
Fax.: 00386 1 5400130
http://content.epson.it/about/
int_services.htm
SPAIN :
EPSON Iberica, S.A
Av. de Roma, 18-26
08290 Cerdanyola del valles
Barcelona
Tel: 93 582 15 00
Fax: 93 582 15 55
Hotline: 902 404142
Web: http://www.epson.es
SWEDEN :
Epson Sweden
Box 329
192 30 Sollentuna
Sweden
Tel.: 0771-400134
Web: www.epson.se
76
< NORTH, CENTRAL AMERICA & CARIBBEANI ISLANDS >
SWIZERLAND :
EPSON DEUTSCHLAND
GmbH
Branch office Switzerland
Riedmuehlestrasse 8
CH-8305 Dietlikon
Tel.:+41 (0) 43 255 70 20
Fax.:+41 (0) 43 255 70 21
Hotline: 0848448820
Web: www.epson.ch
TURKEY :
TECPRO
Sti. Telsizler mah. Zincirlidere cad.
No: 10 Kat 1/2 Kagithane 34410
Istanbul
Tel.: 0090 212 2684000
Fax.: 0090212 2684001
Web: www.epson.com.tr
Info: bilgi@epsonerisim.com
Web: www.epson.tr
UK :
Epson (UK) Ltd.
Campus 100, Maylands Avenue
Hemel Hempstead
Herts
HP2 7TJ
Tel: (01442) 261144
Fax: (01442) 227227
Hotline : 08704437766
Web: www.epson.co.uk
AFRICA :
Contact your dealer
www.epson.co.uk/welcome/
welcome_africa.htm or
http://www.epson.fr/bienvenu.htm
SOUTH AFRICA :
Epson South Africa
Grnd. Flr. Durham Hse, Block 6
Fourways Office Park
Cnr. Fourways Blvd. & Roos Str.
Fourways, Gauteng.
South Africa.
Tel.:+27 11 201 7741 / 0860 337766
Fax:+27 11 465 1542
e-mail: support@epson.co.za
Web: www.epson.co.za
MIDDLE EAST :
Epson (Middle East)
P.O. Box: 17383
Jebel Ali Free Zone
Dubai
UAE(United Arab Emirates)
Tel: +971 4 88 72 1 72.
Fax: +971 4 88 18 9 45
e-Mail: supportme@epson.co.uk
Web: www.epson.co.uk/welcome/
welcome_africa.htm
CANADA :
Epson Canada, Ltd.
3771 Victoria Park Avenue
Scarborough, Ontario
CANADA M1W 3Z5
Tel. 905-709-9475 or 905-709-3839
Web Address:
http://www.epson.com
COSTA RICA :
Epson Costa Rica, S.A.
Dela Embajada Americana,
200 Sur y 300 Oeste
Apartado Postal 1361-1200 Pavas
San Jose, Costa Rica
Tel: (506) 210-9555
Web Address:
http://www.epson.co.cr
MEXICO :
Epson Mexico, S.A. de C.V.
Boulevard Manuel Avila Camacho
389
Edificio 1 Conjunto Legaria
Col. Irrigacion, C.P. 11500
Mexico, DF
Tel: (52 55) 1323-2052
Web Address:
http://www.epson.com.mx
U. S. A. :
Epson America, Inc.
3840 Kilroy Airport Way
Long Beach, CA 90806
Tel: 562-276-4394
Web Address:
http://www.epson.com
77
< SOUTH AMERICA >
< ASIA & OCEANIA >
ARGENTINA :
Epson Argentina S.A.
Avenida Belgrano 964/970
Capital Federal
1092, Buenos Aires, Argentina
Tel: (5411) 5167-0300
Web Address:
http://www.epson.com.ar
BRAZIL :
Epson Do Brasil Ltda.
Av. Tucunare, 720
Tambore Barueri,
Sao Paulo, SP 0646-0020, Brazil
Tel: (55 11) 4196-6100
Web Address:
http://www.epson.com.br
CHILE :
Epson Chile S.A.
La Concepcion 322 Piso 3
Providencia, Santiago,Chile
Tel: (562) 484-3400
Web Address:
http://www.epson.com.cl
COLOMBIA :
Epson Colombia Ltda.
Diagonal 109, 15-49
Bogota, Colombia
Tel: (57 1) 523-5000
Web Address:
http://www.epson.com.co
PERU :
Epson Peru S.A.
Av. Del Parque Sur #400
San Isidro, Lima, 27, Peru
Tel: (51 1) 224-2336
Web Address:
http://www.epson.com.pe
VENEZUELA :
Epson Venezuela S.A.
Calle 4 con Calle 11-1
Edf. Epson -- La Urbina Sur
Caracas, Venezuela
Tel: (58 212) 240-1111
Web Address:
http://www.epson.com.ve
AUSTRALIA :
EPSON AUSTRALIA
PTYLIMITED
3, Talavera Road,
N.Ryde NSW 2113, AUSTRALIA
Tel: 1300 361 054
Web Address:
http://www.epson.com.au
CHINA :
EPSON (BEIJING)
TECHNOLOGY SERVICE
CO.,LTD
Address: 8F,A. The Chengjian Plaza
NO.18
Beitaipingzhuang Rd.,Haidian
District,Beijing, China
Zip code: 100088
Tel: 010-82255566-606
Fax: 010-82255123
EPSON (BEIJING)
TECHNOLOGY SERVICE
CO.,LTD.SHANGHAI
BRANCH PANYU ROAD
SERVICE CENTER
Address: NO. 127 Panyu Road,
Changning District,
Shanghai China
ZIP code: 200052
Tel: 021-62815522
Fax: 021-52580458
EPSON (BEIJING)
TECHNOLOGY SERVICE
CO.,LTD.GUANGZHOU
BRANCH
Address:ROOM 1405,1407 Baoli
Plaza,NO.2 , 6th Zhongshan
Road,Yuexiu District,Guangzhou
Zip code: 510180
Tel: 020-83266808
Fax: 020- 83266055
EPSON (BEIJING)
TECHNOLOGY SERVICE
CO.,LTD.CHENDU BRANCH
Address: ROOM2803B, A. Times
Plaza, NO.2,
Zongfu Road, Chengdu
Zip code: 610016
Tel:028-86727703/04/05
Fax:028-86727702
HONGKONG :
EPSON Technical Support
Centre (Information Centre)
Units 516-517, Trade Square,
681 Cheung Sha Wan Road,
Cheung Sha Wan, Kowloon,
HONG KONG
Tech. Hot Line: (852) 2827 8911
Fax: (852) 2827 4383
Web Address:
http://www.epson.com.hk
JAPAN :
SEIKO EPSON
CORPORATION
SHIMAUCHI PLANT
VI Customer Support Group:
4897 Shimauchi, Matsumoto-shi,
Nagano-ken, 390-8640 JAPAN
Tel: 0263-48-5438
Fax: 0263-48-5680
http://www.epson.jp
KOREA :
EPSON KOREA CO., LTD
27F Star Tower,737
Yeoksam-dong,Gangnam-gu,
Seoul,135-984 KOREA
Tel: 82-2-558-4270
Fax: 82-2-558-4272
http://www.epson.co.kr
MALAYSIA :
EPSON TRADING
(MALAYSIA) SDN. BHD.
3rd Floor, East Tower, Wisma
Consplant 1
No.2, Jalan SS 16/4,
47500 Subang Jaya,
Malaysia.
Tel No. :03 56 288 288
Fax No. :03 56 288 388 or
56 288 399
78
SINGAPORE :
EPSON SINGAPORE PTE.
LTD.
1 HarbourFront Place #03-02
HarbourFront Tower One
Singapore 098633.
Tel: 6586 3111
Fax: 6271 5088
TAIWAN :
EPSON Taiwan Technology
& Trading Ltd.
14F,No. 7, Song Ren Road,Taipei,
Taiwan, ROC.
Tel: (02) 8786-6688
Fax: (02) 8786-6633
http://www.epson.com.tw
THAILAND:
EPSON (Thailand) Co.,Ltd.
24th Floor, Empire Tower,
195 South Sathorn Road, Yannawa,
Sathorn, Bangkok 10120, Thailand.
Tel: (02) 6700680 Ext. 310
Fax: (02) 6070669
http://www.epson.co.th
MEMO
MEMO
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written
permission of SEIKO EPSON CORPORATION. No patent liability is assumed with respect to the use of the information
contained herein. Neither is any liability assumed for damages resulting from the use of the information contained
herein.
Neither SEIKO EPSON CORPORATION nor its affiliates shall be liable to the purchaser of this product or third parties
for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of
this product or unauthorised modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to
strictly comply with SEIKO EPSON CORPORATION’s operating and maintenance instructions.
SEIKO EPSON CORPORATION shall not be liable against any damages or problems arising from the use of any
options or any consumable products other than those designated as Original EPSON Products or EPSON Approved
Products by SEIKO EPSON CORPORATION.
The contents of this guide may be changed or updated without further notice.
Illustrations and screens used in this publication may differ from actual illustrations and screens.
Repair, maintenance service, problems and so on that occur in this product can only be dealt with in the country or the
area of purchase.
General Notice:
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Digital Theater Systems, Inc. , “DTS” and “DTS 2.0 + Digital Out” are
trademarks of Digital Theater Systems, Inc.
Windows Media and the Windows logo, VGA are trademarks or registered trademarks of the Microsoft Corporation of
America in America and in other countries.
iMac is a registered trademark of Apple Computer Inc.
Pixelworks and DNX are trademarks of Pixelworks, Inc.
The DVD video logo is a trademark.
Other product names used herein are also for identification purposes only and may be trademarks of their respective
owners. EPSON disclaims any and all rights in those marks.
© SEIKO EPSON CORPORATION 2006. All rights reserved.
74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson emp twd3 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson emp twd3

Epson emp twd3 Bedienungsanleitung - Deutsch - 88 seiten

Epson emp twd3 Bedienungsanleitung - Holländisch - 82 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info