Bedienungsanleitung Epson emp x56 (Seite 44 von 78) (Englisch)

215548

Zoom out

Zoom in

Vorherige Seite

1/78

Nächste Seite

Problem Solving

f Interference or distortion appear in images

f The image is truncated (large) or small, or the aspect is not suitable

Check Remedy

Is the image signal format setting correct? Change the setting according to the signal for the connected equipment. s"Signal"-"Video Signal" p.26

Are the cables connected correctly? Check that all the cables required for projection are securely connected. s Quick Start Guide

Is an extension cable being used? If an extension cable is used, electrical interference may affect the signals. Use the cables supplied with the

projector to check if the cables you are using may be causing the problem.

Is the correct resolution selected? Set the computer so that the signals being output are compatible with the projector.

s "List of Supported Monitor Displays" p.70 sComputer documentation

Are the "Sync.g" and "Trackingg" settings adjusted

correctly?

Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic

adjustment. If the images are not adjusted correctly after using automatic adjustment, you can make the

adjustments from "Sync." and "Tracking" in the configuration menu.

s"Signal"-"Tracking", "Sync." p.26

Check Remedy

Is a wide panel computer image being projected? Press the [Aspect] button on the remote control to change the aspect mode in the order of "Normal", "4:3",

and "16:9". Change the aspect mode according to the resolution.

Is the image still being enlarged by E-Zoom? Press the [Esc] button on the remote control to cancel E-Zoom. s p.17

Is "Position" adjusted correctly? Press the [Auto] button on the remote control or the [Enter] button on the control panel to perform automatic

adjustment of the computer image being projected. If the images are not adjusted correctly after using

automatic adjustment, you can make the adjustments from "Position" in the configuration menu.

Apart from computer image signals, you can adjust other signals while projecting by adjusting "Position" in

the configuration menu. s"Signal"-"Position" p.26

Is the computer set for dual display? If dual display is activated in the "Display Properties" of the computer's control panel, only about half of the

image on the computer screen is projected. To display the entire image on the computer screen, turn off the

dual display setting. sComputer video driver documentation

Is the correct resolution selected? Set the computer so that the signals being output are compatible with the projector.

s "List of Supported Monitor Displays" p.70 sComputer documentation

Only when projecting images from a video source

Only when projecting computer images

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson emp x56 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson emp x56

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info