Bedienungsanleitung Epson Expression Home XP-423 (Seite 97 von 125) (Englisch)

617810

Zoom out

Zoom in

Vorherige Seite

1/125

Nächste Seite

Solving Problems

Checking the Printer Status

Checking Messages on the LCD Screen

If an error message is displayed on the LCD screen, follow the on-screen instructions or the solutions below to

solve the problem.

Error Messages Solutions

Printer error. Turn power o and on again. For

details, see your documentation.

If the error message still appears after turning the power o and on

again, contact Epson support.

Operation canceled. Error while saving. The memory card may be damaged. Check if your memory card is

available.

You need to replace the following ink

cartridge(s).

To ensure you receive premium print quality and to help protect your

print head, a variable ink safety reserve remains in the cartridge when

your printer indicates it is time to replace the cartridge. Replace the

cartridge when you are prompted to do so.

Paper Conguration is disabled. Some features

may not be available. For details, see your

documentation.

If Paper Conguration is disabled, you cannot use AirPrint. To use

AirPrint, enable Paper Conguration.

A printer's ink pad is nearing the end of its

service life. Please contact Epson Support.

Contact Epson or an authorised Epson service provider to replace the

ink pad*. It is not a user-serviceable part. The message will be displayed

until the ink pad is replaced.

Press the

button to resume printing.

A printer's ink pad is at the end of its service life.

Please contact Epson Support.

Contact Epson or an authorised Epson service provider to replace the

ink pad*. It is not a user-serviceable part.

Communication error. Connect computer. Connect the computer and the printer correctly. If you are connecting

over a network, see the Network Guide. If the error message is still

displayed, make sure that EPSON Scan and Epson Event Manager are

installed on the computer.

Combination of IP address and subnet mask is

invalid. See documentation.

See the Network Guide.

Recovery Mode The printer has started in recovery mode because the rmware update

failed. Follow the steps below to try to update the rmware again.

1. Connect the computer and the printer with a USB cable. (During

recovery mode, you cannot update the rmware over a network

connection.)

2. Visit your local Epson website for further instructions.

* In some print cycles a very small amount of surplus ink may be collected in the ink pad. To prevent ink leakage

from the pad, the printer is designed to stop printing when the pad has reached its limit. Whether and how oen

this is required will vary according to the number of pages you print, the type of material that you print and the

number of cleaning cycles that the printer performs. e need for replacement of the pad does not mean that your

printer has ceased to operate in accordance with its specications. e printer will advise you when the pad

User's Guide

Solving Problems

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson Expression Home XP-423 Seite 97

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson Expression Home XP-423

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info