1.
Peel o the backing
paper
Backing paper
Install the printer driver after installing the Label Editor software.
Install the soft
1. Specifying the network c
2. Printer and ac
3. Sof
1. Installing the "Label Editor" soft
2. Installing the printer driv
U
CAUTION
Alway
after inser
printer
1.
Remove an
tape car
Use a pen or
a pencil.
2.
Press the button to open the top co
CAUTION
Alway
provided.
1.
Connect the A
provided (
printer
into a pow
Use the label editing software "Label Editor" to
create labels
See the Label Editor User's Guide for the detailed
procedures
s
Label Editor User’
MEMO
Epson has a variety of custom tapes available for
many dier
F
provided with the printer
s
Supplies Catalog
MEMO
If you set the tape cutting method to "Half cut"
sur
making it easier to peel o the labels.
See the Label Editor User's Guide for the detailed pr
s
Label Editor User’
Cutting r
Y
round o label corners.
1.
Insert the tape in the tap
insertion slot, following the
guide.
The tape is cut to form r
label corners.
2.
Attach the label and rub it
rmly
Print
Can the computer t
connected to the Internet?
Does the computer hav
Is there a broadband rout
function suppor
Connect the
printer with a USB
cable.
Printer's button does not light.
Check that the power cable is pr
button still does
not light, contact your place of pur
center
Printer does not print when prin
• If a message is displayed on your comput
information.
• Check that connection cables are connected properly
cartr
• Have y
properly if another printer is selected.
• Did you restart the computer after installing the printer driver?
driver may not be installed correctly if the computer w
Reinstall the printer driver
T
• Check that the tape cartridge is properly mounted.
• Print at a low speed
printer driver
Lines appear on printed labels.
The print head is dirty. Clean the print head.
Canceling a print job
Check the printer's power in ON, then pr
button on the front of
the printer briey once.
Labels are not cut automatically
• Check if the cut setting is set to
Label Editor software.
s
Label Editor User’
• Is the cutter blade worn? P
blunt the blade. Con
Half cut function doesn't work properly
• Is the printer set to "Half cut" or "Don't cut"? Check the settings.
• Is the cutter blade worn? P
blunt the blade. Con
T
• Is the printer printing?
• W
the label into the slot follo
• Is the printer clogged with tape scraps? Remove the trimmer co
remove the tape scr
• Are you using 6 millimet
tape with the trimmer
• Is the cutter blade worn? P
blunt the blade. Con
This section describes how to resolve print
See the Network Conguration Guide for ho
connection problems.
T
The printer supports wireless LAN connection, wired LAN connection and USB
cable connection.
The connection method will vary according to the envir
Use the owchart below to carry out the connection procedure.
Connect the printer on a
LAN (Infrastructure Mode).
Does the access point ha
button?
Use the push button auto-
connection function to set the
connection.
s
Network C
Guide "Setting up a wireless
LAN connection (Simple AP
Mode)"
s
Network C
"Wir
PIN code (when automatically
acquiring the IP address fr
printer)"
the printer manually"
s
Network C
settings for a wired LAN connection"
CAUTION
Do not connect connection cables to the printer until you ar
USB Cable C
Crea
W
1. Connecting the pow
cable
2. Inser
1. Creating a label
Printing operations ar
connected to the printer
See the Label Editor User's Guide for the detailed
procedures
s
Label Editor User’
2. Printing a label
3. Attaching a label
Start
This section describes all the procedures from prin
The descriptions of comput
If using the Mac OS X operating syst
MEMO
Wireless LAN c
connection can be used at the same time in any combination.
3.
Place a tape cartridge in the printer as
shown.
Pass the end of the tape
through the gap
4.
Close the top co
5.
Perform the tape feed opera
1) Press the
button to turn the printer
power ON.
2) Press the
button.
Connect the printer on a
Wir
Mode).
Use one of the follo
to set the connection:
• Use a PIN code to set the connection
• Set the connection manually
If a LAN cable is connected to the computer
connection can be used.
Determining the c
1.
Insert the DVD
drive of the comput
2.
1. Select the
language to use.
3.
4.
The "License A
information, then click "
5.
6.
Perform the operations described in the on-scr
instructions.
When the installation completion message
appears, click "Finish
Application software installation is now completed
2. Click
1. Click
1. Select
2. Click
1.
2.
1. Select
2. Click
1. Select
2. Click
3.
1.
2. Connect the computer and print
cable.
4.
When the installation completion scr
click "Finish
The setup proc
Start the Label Editor sof
MEMO
The procedur
the printer's network settings for the rst time
If you have alr
see the Network Conguration Guide
1.
Insert the DVD
drive of the comput
2.
1. Select the
language to use.
3.
4.
The "License A
the information, then click "
5.
Install the Network Conguration
6.
7.
8.
9.
10.
1.
1.
the on-screen instructions.
2. Press the
button until the lamp
ashes.
2.
Press the print button as directed
in the on-screen instructions.
3.
Press the
directed in the on-screen instructions.
The settings have been made when the print
lamp stops ashing and lights steadily
settings information is sav
1.
2.
3.
When the installation completion scr
appears, click "Finish
The setup proc
Start the Label Editor sof
label.
1. Click
1. Select
Next, install the printer driv
.
Next, make the prin
settings. Go to Pr .
Next, install the software in the computer
Go to Procedur .
2. Click
3. Click
1. Click
1. Select
2. Click
1. Select
2. Click
2. Click
2. Click
Auto pow
The printer's pow
automatically when the printer has not
been used for about 8 hours.
No
No
No
No
Ye
Ye
Ye
Ye
1. Select
2. Click
1. Select
2. Click
1. Select
2. Click
1. Select
2. Click
