675425
7
Zoom out
Zoom in
Vorherige Seite
1/9
Nächste Seite
7
LW-K400 User’s Guide
J Creating a ribbon
1. Press .
2. Select "8.Ribbon" using the cursor keys, then press
.
3. Select a value using the cursor keys or enter the value using the
numeric keys, then press
.
Range of ribbon length: 20-40 cm
4. Enter text for printing on both ends of the ribbon.
5. Press
.
J Creating a label including a barcode
Enter barcodes according to their standards.
Check the printed labels with your barcode reader to ensure they can be
correctly read.
Supported barcode: CODE39, CODE128, ITF, CODABAR, UPC-A, UPC-E, EAN-8,
EAN-13
1. Press + .
2. Select an item with
, and press .
3. After setting the barcode, enter the code.
Display Settings ("Display" menu)
The following are the settings to make operation easier.
Backlight
Turns the backlight of the display on or o.
Backlight: On/O
Contrast
Adjusts the density of the fonts on the display.
Value: -5 to +5
Language
Selects the language of the settings and messages on the display.
Language: English/Spanish/French/Portuguese-Br/Portuguese-EU/
Italian/Dutch/German
inch:cm
Selects the unit to indicate the length.
Value: inch/cm
Procedure
1. Press
+ .
2. Select a setting item with
, and press .
3. When the options of the selected item appear, select your choice
with
, and press .
Cleaning
When the exterior is dirty
Wipe the dirt o with a soft cloth. If it is very dirty, use a cloth wrung
out of water.
c
Never use chemicals or solvents such as benzine, thinner, or
alcohol, or use a chemical duster.
When the printhead is dirty
If the print becomes faint or some parts are missing, there may be some
dirt on the printhead.
Clean the print head with a cotton swab moistened with medical
alcohol (commercially available ethanol).
Initialising this product
The product may stop functioning due to static electricity or other
causes.
Initialise the product if it does not operate normally such as the display
is interrupted.
c
Initialise the product. Take extreme care before initialising it.
All the created text will be deleted. The settings you made for
character input will return to the default.
1. Press
.
2. Press and hold
+ , and press .
3. When a message appears, press
.
The product will be initialised.
To abort: Press any button other than
.
7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson LW-K400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson LW-K400

Epson LW-K400 Bedienungsanleitung - Deutsch - 9 seiten

Epson LW-K400 Bedienungsanleitung - Holländisch - 9 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info