Bedienungsanleitung Epson M3180 series Ecotank (Seite 90 von 249) (Englisch)

737359

Zoom out

Zoom in

Vorherige Seite

1/249

Nächste Seite

Item Description

Print Start Timing Select options to start printing the faxes to receive.

❏ All Pages Received: Printing starts after receiving all of the pages. To start printing from the

rst page or last page depends on the setting of Collation Stack feature. See the

explanation for Collation Stack.

❏ First Page Received: Starts printing when the rst page is received, and then prints in order

as the pages are received. If the printer cannot start printing, such as when it is printing other

jobs, the printer starts printing received pages as a batch when it is available.

Collation Stack Since the rst page is printed last (output to the top), the printed documents are stacked in the

correct page order. When the printer is running low on memory, this feature may not be

available.

Print Suspend Time

❏ Print Suspend Time: During the time period you specied from Time to Stop through Tim e

to Restart you specied,, the printer saves documents received in the printer's memory

without printing them. This feature can be used for noise prevention at night or to prevent

condential documents from being disclosed while you are away. Before using this feature,

make sure there is enough free memory. When you set this to O, you can print the received

documents even before the restart time.

❏ Time to Stop: Stops printing documents.

❏ Time to Restart: Restarts printing documents automatically.

Quiet Mode Reduces the noise the printer makes when printing faxes, however, print speed may be reduced.

Report Settings Menu

You can nd the menu on the printer's control panel below:

Settings > General Settings > Fax Settings > Report Settings

Item Description

Fax Log Auto Print

Prints the fax log automatically. Select On(Every 30) to print a log every time 30 fax jobs are

completed. Select On(Time) to print the log at a specied time. However, if the number of fax

jobs exceeds 30, the log is printed before the specied time.

Attach Fax image to

report

Prints a Transmission Report with an image of the rst page of the sent document. Select

On(Large Image) to print the upper part of the page without reducing. Select On(Small

Image) to print the entire page reducing it to t onto the report.

Report Format

Selects a format for fax reports in Fax > More tab > Fax Report other than Protocol Trace.

Select Detail to print with error codes.

Basic Settings Menu

You can nd the menu on the printer's control panel below:

Settings > General Settings > Fax Settings > Basic Settings

Item Description

Fax Speed

Select the fax transmission speed. We recommend selecting Slow(9,600bps) when a

communication error occurs frequently, when sending/receiving a fax to/from abroad, or when

you are using an IP (VoIP) phone service.

User's Guide

Fax Settings

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson M3180 series Ecotank Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson M3180 series Ecotank

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info