675255
32
Zoom out
Zoom in
Vorherige Seite
1/47
Nächste Seite
Solving Monitoring and Controlling Problems
32
Try these solutions depending on your situation.
gg Related Links
• "Solutions When You Cannot Monitor or Control the Projector" p.32
• "Solutions When Network Alert Emails are not Received" p.32
• "Solutions When You Cannot Broadcast a Message" p.32
Solutions When You Cannot Monitor or Control the
Projector
Try these solutions when you cannot monitor or control the projectors.
• Make sure the projector is turned on and connected to the network
correctly.
• Set the Standby Mode setting to Communication On in the projector's
menu so the network software can monitor the projector in standby mode.
• Make sure the projector you want to monitor or control is registered to
Epson Projector Management.
• Turn off the DHCP settings for your projector. If you turn on the DHCP
settings, the projector's IP address changes automatically and Epson
Projector Management may not be able to search for the registered
projector.
• When you restore settings from the backup file, extract the zip file and copy
the extracted files to the following directory.
C:\ProgramData\SEIKO EPSON CORPORATION\Epson Projector
Management
• If you need to reinstall the software but do not have a backup file, remove
the file stored in the following directory, and then reinstall the software:
C:\ProgramData\SEIKO EPSON CORPORATION\Epson Projector
Management
gg Related Links
• "Environment Setup - General" p.41
• "Monitoring and Controlling the Projectors" p.11
Solutions When Network Alert Emails are not
Received
If you do not receive an email alerting you to problems with a projector over
the network, try the following solutions:
• Make sure the projector is turned on and connected to the network
correctly. (If a critical problem causes a projector to shut down, you may
not receive an email alert.)
• Set the Standby Mode setting to Communication On in the projector's
menu so the network software can monitor the projector in standby mode.
• Make sure your electrical outlet or power source is functioning correctly.
• Select Test Email on the Mail tab of the Environment setup screen. If you
do not receive the test email, check all of the settings on the Mail tab for
accuracy.
gg Related Links
• "Environment Setup - Mail" p.43
Solutions When You Cannot Broadcast a Message
If the message broadcasting feature does not work, try the following solutions:
• Make sure the projector is turned on and connected to the network
correctly.
• Set the Standby Mode setting to Communication On in the projector's
menu so the network software can monitor the projector in standby mode.
• In your firewall settings, open the UDP port to allow Message Broadcasting
to communicate through the required port. See your firewall software
documentation for instructions.
• When you press the [Esc] button on the projector's control panel or remote
control to discontinue message broadcasting, the message broadasting
feature is disabled. To distribute messages again, restart the projector.
32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson Projector Management wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson Projector Management

Epson Projector Management Bedienungsanleitung - Deutsch - 48 seiten

Epson Projector Management Bedienungsanleitung - Holländisch - 49 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info