Bedienungsanleitung Epson SC-F10000 series (Seite 33 von 224) (Englisch)

771806

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

Notes on Usage and

Storage

Installation space

North American and Latin American users: Contact

your dealer for product installation. The product must

be installed by an authorized dealer. Damage to the

product from unauthorized installation will not be

covered by your Epson warranty.

Make sure that you secure the following space, clear of

any other objects, so that paper ejection and

consumable replacement are not obstructed.

See the “Specifications Table” for the external

dimensions of the printer.

U “Specifications Table” on page 214

SC-F10000H Series: 6008 mm (236.54 in.)

SC-F10000 Series: 5607 mm (199.48 in.)

Notes when using the printer

Note the following points when using this printer to

avoid breakdowns, malfunctions, and print quality

decline.

❏When using the printer, observe the operating

temperature and humidity range described in the

“Specifications Table”.

U “Specifications Table” on page 214

Note, however, that the desired results may not be

achieved if the temperature and humidity are

within the limits for the printer but not within

those for the media. Be sure the operating

conditions suit the media. For more information,

see the documentation supplied with the media.

Also, when operating in dry areas, air conditioned

environment, or under direct sunlight, maintain

the appropriate humidity.

❏Avoid using the printer in locations with heat

sources or that are exposed to direct draughts

from ventilators or air conditioners. The print

head nozzles could dry out and clog.

❏Do not bend or tug the waste ink tube. Ink could

spill inside or around the printer.

❏Maintenance such as cleaning and replacement

must be performed according to usage frequency

or at recommended intervals. Failure to perform

regular maintenance could result in loss of print

quality. In the absence of the appropriate

maintenance, continued use could damage the

print head.

U “Cleaning” on page 103

❏The print head may not be capped (the print head

may not return to the left side) if the printer is

turned off when the media is jammed or an error

has occurred. Capping is a function for

automatically covering the print head with a cap

(lid) to prevent the print head from drying out. In

this case, turn on the power and wait a while until

capping is performed automatically.

❏When the power is on, do not remove the power

plug or cut the power at the breaker. The print

head may not be capped properly. In this case,

turn on the power and wait a while until capping

is performed automatically.

❏When Maintenance Cleaning is On, the print

head is automatically cleaned at a fixed interval

after printing to keep the nozzles from clogging.

Be sure that the Waste Ink Bottle is placed

whenever the printer is on.

❏As well as being expended during printing, ink is

used during head cleaning and other maintenance

required to keep the print head in working order.

❏To ensure the colors you want to print, maintain a

constant room temperature of 18 to 28 °C (64.4 to

82.4 °F).

SC-F10000H Series/SC-F10000 Series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SC-F10000 series Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SC-F10000 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info