Bedienungsanleitung Epson SC-F10000 series (Seite 38 von 224) (Englisch)

771806

Zoom out

Zoom in

Vorherige Seite

1/224

Nächste Seite

The following applications are available for Windows on the supplied software disc. If you are using a Mac or a

computer without a disc drive, you can install the software from http://epson.sn. Install as required.

For information about these applications, see the Network Guide (Online Manual) or the on-line help for the

application in question.

Note:

Printer drivers are not provided. A software RIP is required for printing. The Epson Software RIP, "Epson Edge Print", is

included with this printer on a separate CD.

The Epson Web site provides plug-ins for the printer.

Software Name Summary

Epson Edge Dashboard ❏You can easily acquire the following variety of information provided by Epson on the

internet.

❏Print settings (EMX) files

❏Update information for the printer firmware (you can update the firmware easily

from Epson Edge Dashboard)

❏Update information (when update information is available, start EPSON Software

Updater to perform the update) for software and manuals installed from the

supplied software disc and setup navigator.

❏Information from Epson

❏With Epson Edge Dashboard installed, you can monitor the status of the printer

connected to a computer over a network or USB connection.

❏You can easily make and change media settings from a computer and write to the printer.

U “Instructions for Starting” on page 40

U “Exiting procedure” on page 49

EPSON Software Updater The software checks if new software or update information is available on the Internet and

installs it if it is available. You can also update the manuals, Epson Edge Dashboard, and Epson

Edge Print for this printer.

Epson communications

drivers

(Windows only)

Epson communications drivers is required when using Epson Edge Dashboard, Epson Edge

Print and when connecting a computer to the printer via USB. Make sure these are installed.

Install Navi This is the installer. During installation, you can easily use a wizard to set the address settings

for connecting to a network.

EpsonNet Config SE With this software, you can configure various network settings for the printer from your

computer. This is useful as it allows you to enter addresses and names using the keyboard.

LFP Accounting Tool The LFP Accounting Tool is not installed automatically. Download it from Epson's website and

install it, if necessary.

This is software that can calculate costs for printed material printed by this printer (cost of

paper, cost of ink, etc.) and can display, total, and output information (in CSV format) about

print jobs. It is useful for cost calculations when you are selling printed material and for

understanding the amount of paper and ink being used.

SC-F10000H Series/SC-F10000 Series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SC-F10000 series Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SC-F10000 series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info