675424
21
Zoom out
Zoom in
Vorherige Seite
1/143
Nächste Seite
When installing ink cartridges for the first time, a
lot of ink is consumed to fill all parts of print head
nozzles to get the printer ready for printing. Be sure
to have replacement cartridges ready soon.
We recommend that ink and Cleaning cartridges be
stored at room temperature out of direct sunlight
and used before the expiry date printed on the
packaging.
To ensure print quality, we recommend that ink
and Cleaning cartridges be used up within a year of
their installation.
Ink cartridges and Cleaning cartridges that have
been stored at low temperatures for an extended
period should be allowed to return to room
temperature over a period of four hours before use.
Do not touch the IC chips on the cartridges. Doing
so may prevent normal operation and printing.
Install ink and Cleaning cartridges into all slots. The
printer cannot print unless cartridges are installed
in all slots.
Do not leave the printer without cartridges
installed. The ink in the printer may dry, preventing
it from printing as expected. Leave cartridges in all
slots even while you do not use the printer.
Information such as the remaining levels is
managed by the IC chip to allow the cartridge to be
continuously used after being removed and
re-installed.
If you remove an ink cartridge before it is empty,
wipe off any ink that is stuck on the ink supply port
using the cleaning stick in the supplied
maintenance kit. If ink dries on the supply port, it
may leak when it is reinstalled.
Make sure that the supply port is free of dust when
storing cartridges. The port does not need to be
capped since there is a valve inside.
Removed ink cartridges may have ink around the
ink supply port, so be careful not to soil the
surrounding area.
To maintain the quality of the print head, this
printer stops printing before ink cartridges are
completely expended.
Although the cartridges may contain recycled
materials, this does not affect functions or printer
performance.
Do not dismantle or remodel cartridges. You may
not be able to print properly.
Do not drop or knock cartridges against hard
objects. It may cause an ink leak.
Notes on Handling White Ink
A characteristic of White ink is that it sediments easily
(ink particles sink to the bottom of the liquid). If the ink
is used while in this state, print quality may decline or
the printer may malfunction. Note the following points
to use the printer under optimum conditions.
Remove the installed cartridge at the start of every
working day or every 20 hours (when a message is
displayed), and shake it well.
U “Shaking and Replacing Ink Cartridges” on
page 83
You need to clean the inside of the tubes when print
quality declines due to sedimentation in the ink
tubes, when there is not enough white, or the white
is uneven in print outs.
U “Tube Washing” on page 91
When storing cartridges, lay them down flat. If
cartridges are stored standing upright, you may not
be able to clear the sedimentation even by shaking
them.
If the printer is not going to be used for more than
two weeks, use the optional Cleaning cartridge to
perform prolonged storage maintenance. If the
printer is left in this condition without performing
maintenance, it may be impossible to clear clogging
in the print head.
U “Prolonged Storage” on page 77
SC-F2100 Series User's Guide
Introduction
21
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson SC-F2100 - SURECOLOR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR Bedienungsanleitung - Deutsch - 158 seiten

Epson SC-F2100 - SURECOLOR Bedienungsanleitung - Holländisch - 149 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info