Bedienungsanleitung Epson SC-F2100 - SURECOLOR (Seite 27 von 143) (Englisch)

675424

Zoom out

Zoom in

Vorherige Seite

1/143

Nächste Seite

Basic Printing

Preparation

To print on a T-shirt using this printer, you need the

following devices and parts.

Prepare genuine ink cartridges, pre-treatment liquid,

and a platen for use with this printer.

U “Options and Consumable Products” on

page 114

Device for Fixating Ink

You need one of the following devices to fixate the ink

after printing. Use as required.

Heat press (commercially available)

As well as fixating the ink, this is also used to remove

creases from T-shirts before printing starts and to fixate

the pre-treatment liquid when using White ink. The

heat press needs to be larger than your platen and to be

able to sustain 170 ˚C or more for 90 seconds. We

recommend a heat press with a foam sheet or mat to

allow the steam to escape. If these are not supplied, you

need to acquire them beforehand.

Oven (commercially available)

This can only perform ink fixation. When using White

ink, make sure you use a heat press as you need to fixate

the pre-treatment liquid.

Under Normal Usage

Platen

A standard M-size platen is supplied. As well as this

M-size platen, there are five other types of platens at

different sizes available.

U “Options and Consumable Products” on

page 114

Grip Pad Tool

This is used to remove slack and creases when loading a

T-shirt on a grip pad covered platen.

T-shirts (commercially available)

We recommend using a 100% cotton, thick fabric with a

high weave density.

You can load media with a cotton blend ratio of 100% to

50%. However, we recommend making a test print in

advance since the print quality cannot always be

guaranteed for some types of fabric.

Sticky tape or a sticky roller (commercially available)

This is used to remove lint from the print surface of the

T-shirt before printing.

Hard roller (optional item or commercially available)

This is used to press the fibers flat on the print surface of

the T-shirt before printing.

When using commercially available products, make

sure you prepare a separate hard roller and

pre-treatment liquid roller.

Heat-resistant release sheet (commercially

available)

Place this over the T-shirt to prevent any pre-treatment

liquid or ink from touching the press side of the heat

press. You can also use it to load T-shirts on the grip pad

covered platen using the grip pad tool.

Prepare silicon paper, fluoro-resin sheets, and so on.

Heat-resistant fabric (commercially available)

Place this on top of and under the T-shirt when using a

heat press with a T-shirt being printed on near the

seams, such as the sleeves. We recommend using the

same type of fabric as the T-shirt.

Items for Use in Pre-treatment

(Only when Using White Ink)

This is necessary when printing using White ink. You

can attain the following results by applying

pre-treatment liquid before printing.

❏ Develops White ink creating a more vivid color.

❏ Improves the color development on the White ink.

SC-F2100 Series User's Guide

Basic Printing

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SC-F2100 - SURECOLOR Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SC-F2100 - SURECOLOR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info