675424
98
Zoom out
Zoom in
Vorherige Seite
1/143
Nächste Seite
Menu Descriptions
Maintenance
* Default Settings
Setting Item Setting Description
Nozzle Check Press the Z button to print a nozzle check pattern. Visually inspect the
printed pattern and perform head cleaning if you notice faint or missing
areas.
U “Checking for clogged nozzles” on page 78
Head Cleaning
Selected Nozzles Find the number of the patterns with faint or missing areas on the check
pattern sheet, specify the cleaning level for all rows or specific nozzle rows
containing the numbers, and clean the print head.
Selected Nozzles allows you to select the nozzle rows to be cleaned. All
Nozzles cleans all of the nozzles in the print head.
You can set Execute (Light), Execute (Medium), or Execute (Heavy) as
the head cleaning level. Try Execute (Light) first. If the check pattern still
contains faint or missing areas even after performing Execute (Light), try
Execute (Medium). If the check pattern still contains faint or missing areas
even after performing Execute (Medium), try Execute (Heavy).
For several times after the initial ink charging, the amount of ink
consumed is higher than normal as cleaning is performed in the same way
as for initial ink charging, regardless of the selected level.
The automatic cleaning start time displayed on the control panel screen
may be reset, depending on the selected cleaning level.
U “Cleaning the print head” on page 80
XX/XX
("XX" indicates an ink
color code.)
Execute (Light)
*
Execute
(Medium)
Execute
(Heavy)
All Nozzles
Execute (Light)
*
Execute
(Medium)
Execute
(Heavy)
Preventive Cleaning
If you want to continue working systematically, select this to prevent
stoppage due to automatic cleaning
*
while you are working. When
executed, the automatic cleaning start time displayed on the control
panel screen is reset.
* Automatic cleaning is performed by the printer after a set time period to
keep the print head in good condition.
Head Cleaning Set Yes
Select Yes t o m ove the pla ten and pri nt head to the maintenance position.
Make sure you select Yes from the menu and then perform replacement. If
you replace without using this menu, the remaining amount in the head
cleaning set is not displayed correctly. Problems can also occur if you
move the print head manually.
U “Replacing the Head Cleaning Set” on page 88
No
*
Head Cap Cleaning Yes
Select Yes t o m ove the pla ten and pri nt head to the maintenance position.
Make sure you select Yes from the menu and then perform cleaning.
Problems can occur if you move the print head manually.
U “Cleaning the Suction Cap” on page 66
No
*
SC-F2100 Series User's Guide
Using the Control Panel Menu
98
98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson SC-F2100 - SURECOLOR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson SC-F2100 - SURECOLOR

Epson SC-F2100 - SURECOLOR Bedienungsanleitung - Deutsch - 158 seiten

Epson SC-F2100 - SURECOLOR Bedienungsanleitung - Holländisch - 149 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info