Bedienungsanleitung Epson SC-S80600 (Seite 13 von 135) (Englisch)

655253

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

u/d buttons (up and down buttons)

❏ When the media loading lever is in a lowered

position and the d button is pressed, media is fed. If

the u button is pressed, media is rewound. This

occurs regardless of the way the loaded media is

rolled.

Note that when the u button is used to rewind, the

media will stop when its edge reaches the starting

print position. Rewind can be resumed by releasing

the button and then pressing it again.

❏ When the media loading lever in a raised position,

the button to rewind media depends on how the

loaded media is rolled.

Printable Side Out: Press the u button.

Printable Side In: Press the d button.

Keep the button pressed to rewind the media up to

25 cm.

❏ When the menus are displayed, these buttons can

be used to select menu items and options. U

“Menu Operations” on page 87

I Z button

❏ Pressing this button when a menu item is

highlighted displays options for the selected item.

❏ Pressing this button when an option is highlighted

selects the highlighted item or performs the

selected operation.

❏ Pressing this button while the alert buzzer is

sounding stops the buzzer.

J [ ] button (heating/drying button)

Pressing this button displays the Heating & Drying

menu on the screen to perform Start Preheat,

Heater Temperature, Drying Time Per Pass, and

After Heater Feed. If the Additional Print Drying

System (supplied with the SC-S60600 Series;

optional with other models) is attached, you can

also adjust Additional Dryer settings. These

options can be adjusted during printing.

U “Changing the Heater Temperature and

Drying Settings” on page 50

K # button (maintenance button)

Pressing this button displays the Maintenance

menu on the screen to perform Nozzle Check,

Cleaning, Head Maintenance, Replace Ink Bottle,

Head Washing, and Pre-Storage Maint. This

button is disabled during printing.

U “The Maintenance Menu” on page 100

L W button (pause/cancel button)

❏ The printer enters pause status if this is pressed

while printing. To release the pause status, press the

W button again, or select Pause Cancel on the

screen and then press the Z button. To cancel

print jobs being processed, select Job Cancel on the

screen and then press the Z button.

❏ Pressing this button when menus are displayed

closes the menus and returns the printer to ready

status.

M [ ] button (light button)

Press when the internal light is on to turn off the

light.

Press when the internal light is off to turn on the

light.

However, when you press the button during an

operation that does not allow the light to turn on,

the light remains off.

Understanding the Display

The illustration shows the display for the SC-S60600

Series.

Ready

A Messages

Displays the printer's status, operation, and error

messages.

U “When a Message is Displayed” on page 105

B Heater temperature

From left to right, this display shows the settings

for the pre-heater, platen heater, and after heater.

The thermometer icons give a rough indication of

the current temperatures of the heaters.

SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide

Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SC-S80600 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SC-S80600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info