Bedienungsanleitung Epson SC-S80600 (Seite 59 von 135) (Englisch)

655253

Zoom out

Zoom in

Vorherige Seite

1/135

Nächste Seite

Precautions regarding

maintenance

Note the following points when cleaning and

replacing parts.

Caution:

❏ Store ink cartridges, Cleaning Cartridge, ink

cleaner, grease, and waste ink in a location

out of reach of children.

❏ During maintenance, wear protective

clothing, including protective eyewear, gloves,

and a mask.

If ink, waste ink, ink cleaner, or grease

contact your skin or enter your eyes or

mouth, take the following actions:

❏ If fluid adheres to your skin, immediately

wash it off using large volumes of soapy

water. Consult a physician if the skin

appears irritated or is discolored.

❏ If fluid enters your eyes, rinse

immediately with water. Failure to

observe this precaution could result in

bloodshot eyes or mild inflammation. If

problems persist, consult with a physician.

❏ If fluid enters your mouth, consult a

physician immediately.

❏ If fluid is swallowed, do not force the

person to vomit, and consult with a

physician immediately. If the person is

forced to vomit, fluid may get caught in

the trachea which can be dangerous.

❏ After replacing the Waste Ink Bottle or using

the ink cleaner, wash your hands and gargle

thoroughly.

❏ Remove the media from the printer before

proceeding.

❏ Never touch the belts, circuit boards, or any parts

that do not require cleaning. Failure to observe

this precaution could result in malfunction or

reduced print quality.

❏ Use only the supplied cleaning sticks or sticks

contained in a maintenance kit. Other types of

sticks that produce lint will damage the print head.

❏ Always use fresh cleaning sticks. Re-using sticks

can make stains even harder to remove.

❏ Do not touch the tips of the cleaning sticks. Oil

from your hands could damage the print head.

❏ Do not use water or alcohol to clean around the

print head or the caps and so on. Ink congeals

when mixed with water or alcohol.

❏ Touch a metallic object before starting work to

discharge any static electricity.

Daily Cleaning

When lint, dust, or ink adheres to the platen heater or

the media edge plates, it could cause clogged nozzles

or ink drops to occur.

To maintain optimum printing quality, we

recommend cleaning before starting work every day.

Caution:

❏ The heaters and media edge plate may be hot;

observe all necessary precautions. Failure to

observe the necessary precautions could result

in burns.

❏ Be careful not to trap your hands or fingers

when opening or closing the front cover.

Failure to observe this precaution could result

in injury.

Important:

When cleaning inside the printer, do not use ink

cleaner. Failure to observe this precaution could

result in damaged parts.

Make sure the printer is turned off and the

screen has turned off, and then unplug the

power cable from the outlet.

Disconnect both of the power cables.

If the additional print drying system is

installed, make sure you unplug the power

cable for the additional print drying system as

well.

Leave the printer for a minute.

SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide

Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SC-S80600 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SC-S80600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info