655253
80
Zoom out
Zoom in
Vorherige Seite
1/135
Nächste Seite
Performing Pre-storage
Maintenance
c
Important:
If the amount of remaining ink or cleaning fluid is
insufficient, the function may not run. When
there is an insufficient amount remaining, have
new cartridges on hand as a precaution.
Buttons that are used in the following settings
A
After confirming that the printer is ready, press
the # button.
The Maintenance menu will be displayed.
B
Use the u button to select Other maintenance,
and then press the Z button.
C
Use the d/u buttons to select Pre-Storage
Maint., and press the Z button.
D
Select All Nozzles, and then press the Z button.
If you do not use the SC-S80600 Series (10
color mode) for up to 13 days, select WH or
MS depending on the ink installed, and then
press the Z button.
E
Follow the on-screen instructions to replace the
cartridge.
Observe the following cautions when storing the
printer and ink cartridges that were removed during
use.
U “Notes when not using the printer” on page 18
U “Notes on handling ink cartridges” on page 19
Restarting use of the printer
c
Important:
When restarting use of the printer, charge the
printer with ink. When charging using removed
ink cartridges, have new ink cartridges on hand as
a precaution.
Switch on the power and follow the on-screen
instructions.
When first printing after restarting use, perform a
nozzle check and check that there are no clogs.
U “Printing nozzle check patterns” on page 77
Change Color Mode
(SC-S80600 Series only)
Change the color mode as follows on the printer as
necessary.
10 color mode (WH) <= => 10 color mode (MS)
10 color mode (WH) <= => 9 color mode
10 color mode (MS) <= => 9 color mode
Notes on Changing
The time required and preparation for Change Color
Mode are shown below.
Time required: up to approximately 1 hour
The time required to complete the change varies
according to the current color mode.
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Maintenance
80
80

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson SC-S80600 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson SC-S80600

Epson SC-S80600 Bedienungsanleitung - Holländisch - 146 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info