Bedienungsanleitung Epson SC-T5100 Series (Seite 149 von 178) (Englisch)

675271

149

Zoom out

Zoom in

Vorherige Seite

1/178

Nächste Seite

Turn on the printer, and load a number of

sheets of A3 size plain paper in the auto sheet

feeder.

U “Loading Paper in the Auto Sheet Feeder”

on page 34

From the Home screen, touch Settings -

Maintenance - Paper Guide Cleaning.

Tou ch Start.

e paper is ejected.

Conrm

if there is any soiling on the ejected

paper.

❏ If there is soiling: Touch and hold Run Again

until the soiling is gone.

❏ If there is no soiling: Touch Done to complete

roller cleaning.

The paper is creased.

Are you using the printer at normal room

temperature?

Epson special media should be used at normal room

temperature (temperature: 15 to 25°C, humidity: 40

to 60%). For information about paper such as thin

paper from other manufacturers that requires

special handling, see the documentation supplied

with the paper.

Is there a gap between both edges of the

roll paper and the anges?

Conrm that the spindle anges are right up against

both edges of the roll paper, with no gaps. If there

are any gaps, then the paper is fed at an angle, and

this may result in wrinkling.

U “Loading Roll Paper” on page 28

Has Media Adjust been carried out?

Conrm

that paper type settings that match the

paper being used, and perform Media Adjust.

U “Setting Loaded Paper” on page 39

U “Optimizing Paper Settings (Media Adjust)” on

page 43

Is the roll paper tension weak?

If wrinkles occur on the roll paper, increase the

paper tension settings. In the roll paper information

eld

- Advanced Media Setting - Back Tension,

select High or Extra High.

The reverse side of the printed paper

is soiled.

Is ink dry on the printed surface?

Depending on the printing density and media type,

the ink may take a while to dry. Do not stack the

paper until the printed surface is dry.

Additionally, setting the drying time on the printer

in Roll Paper - Advanced Media Setting - Drying

Time - Drying Time per Page to a longer time will

stop post-print processing (ejection, cutting),

waiting for the paper to dry naturally.

U “Roll Paper menu” on page 109

Blurred text, lines, and images

Is the Media Type setting correct?

Conrm that the paper type selected with the

printer matches the paper being used, and that the

printer driver Media Type settings are Use Printer

Settings. The amount of ink to be red is controlled

according to the media type. If the settings do not

match the paper loaded, too much ink may be red.

U “Setting Loaded Paper” on page 39

Is the Color Density setting appropriate?

On the printer driver Advanced screen, click Paper

Conguration, and decrease the ink density. The

printer may be printing with much ink for some

paper. We recommend that black and color

densities be decreased similarly.

Are you printing on tracing paper?

If too much ink is discharged, on the printer driver

Advanced screen, click Paper Conguration, and

decrease the ink density. Alternatively, changing

Paper Type to Tracing Paper <LowDuty> may

result in an improvement.

SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide

Problem Solver

149

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SC-T5100 Series Seite 149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SC-T5100 Series

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info