Bedienungsanleitung Epson STYLUS C64 INKJET (Seite 8 von 12) (Englisch)

58824

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

EPSON Stylus C64

8 - EPSON Stylus C64 8/03

10. Close the cartridge cover.

11. Close the printer cover and press the H ink button. The

printer begins charging the ink delivery system.

The green P power light flashes and the printer makes

noise. Charging takes about half a minute. When it’s

finished, the green P power light stops flashing and stays

on, and the red H ink light goes out.

Caution:

Never turn off the printer while the P power light is flashing, unless

the printer hasn’t moved or made noise for more than 5 minutes.

Cleaning the Print Head

If your printouts are unexpectedly light, or dots or lines are

missing, you may need to clean the print head. This unclogs

the nozzles so they can deliver ink properly. Print head

cleaning uses ink, so clean it only if quality declines.

This section explains how to clean the print head using the

Head Cleaning utility.

You can also clean the print head by holding down the H ink

button on the printer for three seconds. (This only works

when the red H ink light is off.

Caution:

When you don’t turn on your printer for a long time, print quality

can decline, so turn it on and print a few pages at least once a

month to maintain good print quality.

Running the Head Cleaning Utility

1. Make sure the printer is turned on but not printing, and the

red H ink light is off. (If the red H ink light is flashing or on,

you need to replace a cartridge; see page 6 for details.)

2. Do one of the following:

❏ Windows: right-click the printer icon on your

taskbar (in the lower right corner of your screen).

Select

Head Cleaning.

❏ Macintosh OS X: Open the

Applications folder and

select

EPSON Printer Utility. Select Stylus C64 in the

printer list, click

OK, and select Head Cleaning.

❏ Macintosh OS 8.6 to 9.x: Open the File menu and

choose

Page Setup or Print. Click the Utility

button, then click the

Head Cleaning button.

3. Follow the instructions on the screen to clean the print

head.

Cleaning takes about 30 seconds, during which the printer

makes some noise and the green P power light flashes.

Caution:

Never turn off the printer while the P power light is flashing, unless

the printer hasn’t moved or made noise for more than 5 minutes.

4. When the green P power light stops flashing, make sure

paper is loaded in the printer, then do the following:

Windows: Click

Print nozzle check pattern, then

click

Print.

Macintosh: Click

Confirmation, then click Next.

The nozzle check pattern prints (see the next section for

details).

5. If the nozzle check pattern has no gaps, click

Finish.

If the pattern has gaps, click

Clean to clean the print head

again.

You can also turn the printer off and wait overnight—this

allows any dried ink to soften—and then try cleaning the

print head again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson STYLUS C64 INKJET Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info