511897
125
Zoom out
Zoom in
Vorherige Seite
1/152
Nächste Seite
Troubleshooting
6-17
Solving Miscellaneous Printout
Problems
If your printout results are not what you expected, try these
solutions.
Characters are incorrect or garbled.
.
The margins are incorrect.
Possible cause Solution
Your printer is not the
Windows default printer.
Select your printer as the default Windows printer. See your
Windows documentation or online help for instructions.
Your printer is not selected
in the Macintosh Chooser.
Open the Chooser and select your printer. See the Quick Setup
booklet for instructions.
Printing is stalled in Spool
Manager (Windows 95/98)
or in the Windows NT print
queue.
Delete the stalled print jobs in Spool Manager or the Windows NT
print queue following the instructions in Chapter 4. Then try
printing again.
If you’re using background
printing on a Macintosh,
spooled data may be
corrupted.
Open the Extensions folder, EPSON folder, and Spool folder. Then
delete any queued files. Increase the memory requirements for
EPSON Monitor as described in Chapter 4.
The interface cable is not
securely connected.
Turn off your printer and computer. Then make sure the cable is
connected securely and meets the printer’s specifications.
The printer’s parallel
interface transfer rate
doesn’t match your
computer’s transfer rate.
Make sure your computer and printer’s Parallel I/F transfer rate are
the same. Set the printer’s transfer rate using default-setting
mode. See Appendix B for instructions. If you are not sure what
settings to use, try setting both to Normal.
Possible cause Solution
Margins are set incorrectly
in your software
application.
Check your software documentation for instructions on selecting
the correct margins for your paper size. The maximum printable
width is 16.3 inches (416 mm) on any size paper.
Make sure the margins are within the printable area of the page.
See Appendix B for more information.
Paper settings in the printer
software are incorrect for
your paper size.
Select the correct paper settings for your paper size. See
Chapters 1 and 2 for more information.
Loire-PLUS.BK.book Page 17 Friday, May 2, 2003 2:56 PM
125

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson Stylus Color 3000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson Stylus Color 3000

Epson Stylus Color 3000 Bedienungsanleitung - Deutsch - 129 seiten

Epson Stylus Color 3000 Bedienungsanleitung - Englisch - 286 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info