Bedienungsanleitung Epson Stylus CX4900 (Seite 21 von 27) (Englisch, Holländisch)

37864

Zoom out

Zoom in

Vorherige Seite

1/27

Nächste Seite

Maintenance 21

English

Cleaning This Product

To keep the operation of the product at its best, clean

it periodically using the following procedure.

1. Unplug the power cord.

2. Remove all paper from the sheet feeder.

3. Use a soft brush to carefully clean away all dust

and dirt from the sheet feeder.

4. If the glass surface of the document table gets

dirty, clean it with a soft, dry, clean cloth. If the

glass surface is stained with grease or some other

hard-to-remove material, use a small amount of

glass cleaner and a soft cloth to remove it. Wipe

off all remaining liquid.

5. If the inside of the product accidentally gets

soiled with ink, use a soft, dry, clean cloth to

wipe the ink off the area indicated in the

illustration.

w Warning:

Be careful not to touch the gears or rollers inside the product.

c Caution:

❏ Do not press the glass surface of the document table with any

force.

❏ Be careful not to scratch or damage the glass surface of the

document table, and do not use a hard or abrasive brush to

clean it. A damaged glass surface can decrease the scan

quality.

❏ Do not apply grease to the metal parts under the print head

carriage.

❏ Never use alcohol or thinner to clean the product. These

chemicals can damage the components as well as the case.

❏ Be careful to keep water away from the printing and scanning

mechanisms and electronic components.

❏ Do not spray the inside of the product with lubricants.

Unsuitable oils can damage the mechanism. Contact your

dealer or a qualified service person if lubrication is needed.

Transporting This Product

If you need to move the product some distance, you

need to prepare it for transportation in its original

box or one of a similar size.

c Caution:

❏ When storing or transporting the product, avoid tilting it, placing

it vertically, or turning it upside down; otherwise ink may leak

from the cartridges.

❏ Leave the ink cartridges installed; removing the cartridges for

transportation may damage the product.

1. Remove all paper from the sheet feeder and

make sure the product is off.

2. Open the scanner unit and make sure the print

head is in the home position on the right.

3. Secure the ink cartridge holder to the case with

tape as shown.

4. Close the scanner unit.

5. Unplug the power cord from the outlet, then

disconnect the USB cable from your computer.

6. Close the paper support, the feeder guard, and

the output tray.

7. Repack the product in the box, using the

protective materials that came with it.

Keep the product level as you transport it. After you

move it, remove the tape securing the print head. If

you notice a decline in print quality, run a cleaning

cycle (& “Checking and Cleaning the Print Head” on

page 20) or align the print head (& “Aligning the

Print Head” on page 20).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson Stylus CX4900 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson Stylus CX4900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info