Bedienungsanleitung Epson Stylus Photo RX590 (Seite 23 von 48) (Englisch)

583941

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Printing from a Memory Card 23

English

Red-eye reduction

1. Follow the instructions on the preceding pages

to select the photos you want to print

(& “Printing Photos” on page 21).

2. Press the x [Print Settings] button.

3. Use the u or d button to select Red Eye, then

press the r button.

4. Use the u or d button to select On, and then

press OK.

Note:

Depending on the type of photo, parts of the image other than the

eyes may be corrected.

Selecting the layout

1. Follow the instructions on the preceding pages

to select photos you want to print (& “Printing

Photos” on page 21).

2. Press the x [Print Settings] button.

3. Use the u or d button to select Layout, then

press the r button.

4. Use the u or d button to select one of these

layout options, then press OK.

*If your memory card contains P.I.F. frame data, you

can choose the P.I.F. data to print with your photo

from the Layout option.

Note:

For most multi-photo layouts, the set number of copies of each

selected photo is printed per sheet. If you choose 4-up as the

layout setting, but you do not select four photos, a blank space is

left for any missing photos.

Date Prints the date your photo was taken in

one of the following formats:

yyyy.mm.dd (2006.04.13),

mmm.dd.yyyy (Apr.13.2006),

dd.mmm.yyyy (13.Apr.2006), or

None (no date).

Print Info. Select On to print your camera's

exposure time (shutter speed), F-stop

(aperture), and ISO speed.

Fit Frame Select On, to automatically crop your

photo to fit inside the space available

for the layout you selected. Select Off

to turn off automatic cropping and leave

white space at the edges of the photo.

Bidirectional Select On to increase the print speed.

Select Off to improve the print quality

(but your photos print more slowly).

Expansion Select the amount the image is

expanded when you select Borderless.

Standard: No margins are printed.

(The image is slightly enlarged and

cropped to fill the sheet of paper.)

Mid: Low expansion rate. (Margins

might be printed.)

Min: Lowest expansion rate. (Margins

might be printed.)

Setting Description

Borderless Prints your photo all the way to the edges

of the paper.

Border Prints your photo with a white margin at

the edge.

Upper Half Prints your photo on the upper half of the

paper.

Photo ID Prints photos at two sizes (35.0 × 45.0

mm and 50.8 × 50.8 mm on the 10 × 15

cm (4 × 6 in.) size photo paper. It is

useful for identification photograph.

2-up Prints two photos per sheet.

4-up Prints four photos per sheet.

8-up Prints eight photos per sheet.

20-up Prints 20 photos per sheet.

30-up Prints 30 photos per sheet.

80-up Prints 80 photos per sheet.

Sticker16 Places 16 images on one sheet. If there

are fewer than 16 images, the remaining

space is left blank. It two or more is set as

the number of prints, it prints the

specified number of pages using the

same layout.

P.I.F.

000000*

Prints your photo with the P.I.F. frame.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson Stylus Photo RX590 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson Stylus Photo RX590

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info