Bedienungsanleitung Epson Stylus Photo RX590 (Seite 42 von 48) (Englisch)

583941

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

42 Solving Problems

Printing and copying problems

The product makes printing sounds, but nothing

prints.

■ The print head nozzles may need cleaning

(& “Cleaning the print head” on page 38).

■ Make sure the product is on a flat, stable surface.

The margins are incorrect.

■ Make sure your original is positioned in the top

left corner of the document table.

■ If the edges of the copy are cropped off, move the

original away from the corner slightly.

■ Make sure the paper size settings are correct for

the paper you have loaded.

■ Make sure your paper is loaded short edge first,

all the way to the right, with the left edge guide

lightly against the paper (& “Loading Paper” on

page 8).

■ Do not load paper above the c arrow mark

inside the left edge guide (& “Loading Paper” on

page 8).

■ Select Actual instead of Auto Fit Page or adjust

the zoom settings.

Blank pages are printed.

■ Make sure the paper size settings are correct for

the paper you have loaded.

■ The print head nozzles may need cleaning

(& “Cleaning the print head” on page 38).

Paper feed problems

Paper does not feed correctly or is jammed.

■ If paper does not feed, remove it from the sheet

feeder. Fan the paper, load it against the right

side, and slide the left edge guide against the

paper (but not too tightly). Make sure the paper

is not in front of the feeder guard.

■ Do not load paper above the c arrow mark

inside the left edge guide (& “Loading Paper” on

page 8).

■ If paper is jammed, press the x Start button to

eject the jammed paper. If the paper is not

ejected, turn off the power, lift open the scanner

unit, and remove any paper that is inside,

including any torn pieces. Carefully reload

paper, turn the power back on, and press the

x Start button.

■ If paper jams frequently, make sure the left edge

guide is not pushed too tightly against the paper.

Try loading fewer sheets of paper.

Print quality problems

You see banding (light lines) in your printouts or

copies.

■ Clean the print head (& “Checking the print

head” on page 38).

■ Make sure you select the correct paper type

(& “Selecting Paper” on page 7).

■ Make sure the printable (whiter or glossier) side

of the paper is face up.

■ The ink cartridges may need replacing

(& “Removing and installing ink cartridges” on

page 36).

■ Align the print head (& “Aligning the Print

Head” on page 39).

■ Clean the document table (& “Cleaning This

Product” on page 40).

■ If a moiré (cross-hatch) pattern appears on your

copy, change the Zoom setting or shift the

position of your original.

Your printout is blurry or smeared.

■ Make sure the document is placed flat against

the document table. If only part of the image is

blurred, your original may be wrinkled or

warped.

■ Make sure the product is not tilted or placed on

an uneven surface.

■ Make sure your paper is not damp, curled, or

loaded face down (the whiter or glossier

printable side should be face up). Load new

paper face-up.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson Stylus Photo RX590 Seite 42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson Stylus Photo RX590

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info