58970
144
Zoom out
Zoom in
Vorherige Seite
1/168
Nächste Seite
7-8
7-8 | Resolving Problems
Solving Paper Problems
If paper feed or paper jam problems occur frequently, try one or more of the
following solutions:
When youre loading roll paper, make sure you line up the edge with the
vertical row of holes at the printers paper exit. Always turn the roll back
to remove the slack. See page 1-4 for more information.
If youre not using a roll of paper thats installed in the printer, secure it
with the roll paper belt. See page 2-7 for more information.
For cut sheet paper, let the printer automatically load your paper so that
it feeds correctly. Follow the instructions on page 2-10.
For posterboard, follow the instructions on page 2-11 to load the media
correctly.
Make sure the paper is not folded, wrinkled, or damp.
Roll paper cannot be cut. The paper cutter blade may be dull. Follow the instructions on page 6-11 to
replace the blade.
The paper may be too thick to cut with the built-in cutter. Cut the paper by hand
with scissors or the optional utility cutter.
The paper may not be ejecting properly. Make sure the Roll Auto Cut light on
the control panel is on. Press the Paper Source button if necessary, and then
press the Cut/Eject button.
Printing is too slow. Choose a lower resolution in your printer software for faster printing.
Clear space on your hard drive or run a defragmentation utility.
Dont run too many applications at the same time.
Turn off virtual memory.
Add RAM to your system.
If you have a Macintosh, turn off background printing. If you want to continue
using background printing, select EPSON Monitor3 and increase its memory
requirements.
If youre running Windows and your computer supports ECP or Enhanced
mode and/or DMA transfers, turn them on to speed up printing. See your
computer documentation and page 4-16 for more information.
Miscellaneous printing problems (continued)
Problem Solution
144

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson STYLUS PRO 10000 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info