Bedienungsanleitung Epson Stylus Pro 11880C (Seite 124 von 182) (Englisch)

617755

124

Zoom out

Zoom in

Vorherige Seite

1/182

Nächste Seite

Maintenance 124

User’s Guide

About ink cartridges

Be sure to use the following ink cartridges with

this printer.

Notes for handling the ink

cartridges

❏ When INK LOW appears on the LCD panel,

replace the cartridges with a new one as soon

as possible to avoid ink to being expended

while printing.

❏ Use up the ink cartridge within six months of

installation for best results.

❏ Do not use an ink cartridge beyond the date

printed on the cartridge carton. If you use an

ink cartridge beyond the expiry date, it may

affect the print quality.

❏ Store ink cartridges under the same condition

as the printer.

❏ Do not touch the ink supply port or its

surrounding area. The ink may leak from it.

❏ Do not touch the green IC chip on the side of

the ink cartridge. Doing so may affect normal

operation and printing.

❏ Because the green IC chip has the cartridge’s

own information and the ink remaining

information, you can still use the ink cartridge

after pulling out the ink cartridge from the

printer.

❏ Do not add ink to the cartridge. The green IC

chip remembers the ink remaining so that you

cannot change the amount of ink remaining.

❏ Do not drop or knock it against hard objects;

otherwise, the ink may leak.

❏ The ink is used not only for printing but also

for print head cleaning.

Notes for replacing the ink

cartridges

❏ If you move the ink cartridge from the cold

place to warm place, condensation may occur.

Leave it at room temperature for more than

four hours before using the ink cartridge.

❏ Shake an ink cartridge horizontally well

(about 5 seconds) before installing it for best

results.

❏ Do not leave the printer without ink

cartridges installed. The print head nozzles

may dry and you may not be able to print.

❏ Install an ink cartridges into each slot. You

cannot print if any of the slots are empty.

❏ Make sure that the printer is turned on when

you replace an ink cartridge. If the printer is

turned off while changing the ink cartridge,

the amount of ink remaining is not detected

correctly so you cannot print properly.

❏ Do not turn off the printer while replacing the

ink cartridges. The ink does not fill up

correctly or the print head nozzles may dry

out.

Slot

No.

Ink color Product

code

Product

code

Stylus

Pro

11880

Stylus Pro

11880C

#1 Vivid Light

Magenta

T591600 T592680

#2 Light Light

Black

T591900 T592980

#3 Matte Black T591800 T592880

#4 Light Black T591700 T592780

#5 Light Cyan T591500 T592580

#6 Cyan T591200 T592280

#7 Vivid

Magenta

T591300 T592380

#8 Photo Black T591100 T592180

#9 Yellow T591400 T592480

Note:

A protection system is provided to prevent improper

cartridge insertion. If you cannot insert the ink

cartridge smoothly, the type of cartridge may be

incorrect. Check the package and product code.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson Stylus Pro 11880C Seite 124

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson Stylus Pro 11880C

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info