617717
23
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
21
English
Loading the Cut Sheet Media
To load cut sheet media longer than A3 or Legal,
see the next section. To load A4, Letter or 8 × 10
inch cut sheet media, see “Loading Cut Sheet
Media with a Size of A4, Letter or 8 × 10 Inches”
on page 22.
If you are printing on thick paper (0.5 to 1.5 mm),
see “Printing on Thick Paper (0.5 to 1.5 mm)” on
page 22
Loading Cut Sheet Media Longer
than A3 or Legal
To load cut sheet media longer than A3 or Legal,
follow the steps below.
c
Caution:
As much as possible, keep your fingers off the
printable surface of the media, as fingerprints
may reduce printout quality.
1. Make sure that the printer is on and the roll
paper cover is closed.
2. Press the Paper Source l button repeatedly
until Sheet appears.
3. Make sure that the Power light is not flashing,
and then set the paper lever to the released
position. LEVER RELEASED. LOAD PAPER
appears on the LCD panel.
c
Caution:
Do not set the paper lever to the released
position while the Power light is flashing;
otherwise, damage may occur.
4. Load the sheet into the paper insertion slot
until it comes out below. Make sure that the
right and bottom edges of the sheet are
straight and in line with the horizontal line
and the vertical line.
5. Set the paper lever to the secured position.
PRESS PAUSE BUTTON appears on the LCD
panel.
6. Press the Pause button.
The print heads move and the sheet feeds into
the printing position automatically. READY
appears on the LCD panel.
Now the printer is ready to print. While the printer
is printing, do not open the front cover. If the front
cover is opened while printing is in progress, the
printer stops printing, and then restarts printing
when the front cover is closed. Stopping and
restarting printing may reduce the print quality.
c
Caution:
Do not leave the paper in the printer for a long
period of time; its quality will deteriorate. We
recommend that you remove the paper from the
printer after printing.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson Stylus Pro 9880 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson Stylus Pro 9880

Epson Stylus Pro 9880 Installationsanweisung - Deutsch - 30 seiten

Epson Stylus Pro 9880 Bedienungsanleitung - Deutsch - 375 seiten

Epson Stylus Pro 9880 Bedienungsanleitung - Englisch - 373 seiten

Epson Stylus Pro 9880 Installationsanweisung - Holländisch - 28 seiten

Epson Stylus Pro 9880 Bedienungsanleitung - Holländisch - 383 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info