Bedienungsanleitung Epson STYLUS PRO WT7900 (Seite 79 von 116) (Englisch)

617726

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Automatic maintenance

function

This printer has self-maintenance functions for

maintaining the print head in consistently good

condition to ensure the best print quality.

Auto white ink refresh function

When white ink is not used for a long time, white ink

sediment may remain inside the ink tube and may

affect white ink print results. This function changes

white ink inside the ink tube to prevent

sedimentation. It takes about three to four minutes to

complete auto white ink refresh. (However, if the

cleaning was performed by the printer’s AUTO NOZZLE

CHECK function, it takes 4 minutes or more.)

Note:

❏ White ink refresh does not automatically run

when you select OFF from AUTO WT INK

REFRESH on the LCD panel.

See “Menu Mode” on page 17

❏ White ink refresh does not automatically run

when you select cleaning liquid even if ON is

selected from AUTO WT INK REFRESH on the

LCD panel.

AUTO NOZZLE CHECK function

The printer performs a nozzle check without printing

a pattern and detects the clogged nozzles

automatically. If there are missing dots, it performs

cleaning automatically (taking two to 12 minutes).

When the AUTO NOZZLE CHECK function is ON, it

works in the following cases:

❏ After the initial ink charging is completed.

❏ After head cleaning.

❏ After changing the white ink and the cleaning

required.

❏ When printing is started.

The AUTO NOZZLE CHECK function works when

printing is started at the time you set on the control

panel; ON:PERIODICALLY or ON:EVERY JOB.

Furthermore, the automatic head cleaning is

performed the number of times you set on the control

panel; one time for the default setting or three times

(maximum) until the clogged nozzles are cleared.

However, after manual head cleaning, the automatic

head cleaning is performed once in spite of the

settings on the control panel.

Capping function

Capping is a function for automatically covering the

print head with a cap (lid) to prevent the print head

from drying out. Capping is performed in the

following situations.

❏ When several seconds have elapsed after printing

finishes (that is there is no print data sent).

❏ When printing is stopped.

Take care of the following points to ensure that the

print head is capped properly.

❏ If the print head is not positioned on the right

side (it is not capped), turn the printer on, then

off again. By turning the printer off with the

button, the head is capped properly.

❏ If you turn the power off when a paper jam or

error occurs and the print head is not capped,

turn the printer on again. Shortly, the print head

is capped automatically. Check that it is properly

capped, then turn the printer off.

❏ Do not move the print head manually under any

circumstances.

❏ Do not remove the power plug of the printer or

cut the power at the circuit breaker when the

power is on. The head may not be capped properly.

Epson Stylus Pro WT7900/7910 User’s Guide

Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson STYLUS PRO WT7900 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson STYLUS PRO WT7900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info