Bedienungsanleitung Epson STYLUS PRO WT7900 (Seite 101 von 116) (Englisch)

617726

101

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

Cause What to do

The printed surface is scuffed or

soiled.

Is the paper too thick or too thin?

Check that the paper is a specification that can be used with this printer. For

information about the media types and appropriate settings for printing on paper from

other manufacturers or when using a raster image processor (RIP), please refer to the

handling instructions for the paper, or contact the retailer of the paper or the

manufacturer of the RIP.

Is the print head scuffing the printed surface?

If the print head scuffs the printed surface, set PLATEN GAP from WIDE to WIDEST.

See “PRINTER SETUP” on page 22

Is the paper eject method appropriate?

The paper eject method differs depending on the media type. In particular, use Epson

Film Basket when printing on Epson ClearProof Film.

See “PRINTER SETUP” on page 22

Is the print head scuffing the top edge of the paper?

If you select a margin value lower than the default, the print head may scuff the top

edge of the paper and print quality will decline. In this case, restore the default value or

set to TOP 35/BOTTOM 15mm.

See “PRINTER SETUP” on page 22

Is the print head scuffing the edge of the paper?

If you select a margin value lower than the default, the print head may scuff the top

edge of the paper and print quality will decline. In this case, restore the default value or

set the ROLL PAPER MARGIN to wide (TOP 35/BOTTOM 15mm).

See “PRINTER SETUP” on page 22

Widen margins at the bottom of the roll paper

Depending on the paper, usage and storage environments, and the content of the

printed data, scuff marks may remain at the bottom of the printed surface. If this

happens, set the ROLL PAPER MARGIN settings to TOP 15/BOTTOM 35mm to widen the

margins at the bottom of the paper.

See “PRINTER SETUP” on page 22

The paper is creased.

Are you using the printer at normal room temperature?

Epson’s special paper should be used at normal room temperature (temperature: 15 to

25˚C and for Epson ClearProof Film 20 to 25˚C , humidity: 40 to 60%). For information

about paper such as thin paper from other manufacturers that requires special

handling, refer to the relevant handling instructions.

When using paper other than Epson special media, have you set the paper

characteristics?

When using paper other than Epson special media, set the paper characteristics

(custom paper) before printing.

See “Printing with Non-Epson Media” on page 60

The back of the printed paper is

soiled.

Set PAPER SIZE CHECK to ON in the Menu mode.

If the printed image is bigger than the paper width and the PAPER SIZE CHECK is OFF,

the image is still printed beyond the edges of the printing area, causing the inside of

the printer to become soiled. In order to keep the inside of the printer clean, set PAPER

SIZE CHECK to ON in Menu mode.

See “PRINTER SETUP” on page 22

Is ink dry on the printed surface?

Depending on the printing density and paper type, ink may take some time to dry. Do

not stack the paper until the printed surface is dry.

Too much ink is being released.

Is the PAPER TYPE setting correct?

Make sure that the printer’s paper setting match the paper you are using. Ink discharge

is controlled according to the media type. If the paper setting and the loaded paper

differ, too much ink may be discharged for that type of paper.

Epson Stylus Pro WT7900/7910 User’s Guide

Problem Solver

101

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson STYLUS PRO WT7900 Seite 101

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson STYLUS PRO WT7900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info