20054
12
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
12
Place the printer on a desk. If you cannot place
the printer on a desk, you will need the Stand.
If you place your printer on a desk, follow the
guidelines listed below.
Choose a desk that can hold the printer
weight (about 49 kg) and has a height of
600-800 mm from the floor.
Make sure the surface is flat and stable.
Place the front rubber legs of the printer
just at the end of the desk.
Leave enough room (over 600 mm) in
front of the desk.
Prevent your printouts from getting dirty
or crinkled.
Use a grounded power outlet. Do not use a
damaged or frayed power cord. Avoid using
an outlet that is shared with other appliances.
Use only an outlet that meets the power
requirements of this printer.
Operate the printer under the following
conditions:
Avoid locations that are subject to direct
sunlight, excessive heat, moisture, or dust.
Do not block the ventilation openings.
Avoid locations near potential sources of
interference such as loud speakers or cordless
phones.
Avoid locations near TVs, radios, air
conditioners, or humidifiers.
Avoid locations that are subject to shocks or
vibrations.
Keep the printer away from combustible
substances.
Keep the printer away from dusty areas.
Deciding Where to Unpack the Printer
Before unpacking, read the followings:
Setup and assemble the printer near to the
chosen place of use, as moving the printer may
result in damage.
Allow floor space of 2.5 × 2.5 m approx., and
height of at least two times that of the larger
box containing the printer unit.
Unpacking the Printer
c
Caution:
The printer unit is heavy and unwieldy.
Have two people unpack the printer.
1. Open the box containing the printer and
remove the roll paper spindle with roll paper,
polystyrene foam, and cardboard cushions
from around the printer.
2. Remove the fixers from the sides of the box.
Temperature: 10 to 35°C
Humidity: 20 to 80% without condensation
12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Epson STYLUSPro9400 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Epson STYLUSPro9400

Epson STYLUSPro9400 Installationsanweisung - Deutsch - 28 seiten

Epson STYLUSPro9400 Bedienungsanleitung - Deutsch - 422 seiten

Epson STYLUSPro9400 Bedienungsanleitung - Englisch - 385 seiten

Epson STYLUSPro9400 Installationsanweisung - Holländisch - 28 seiten

Epson STYLUSPro9400 Bedienungsanleitung - Holländisch - 416 seiten

Epson STYLUSPro9400 Bedienungsanleitung - Spanisch - 423 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info