Bedienungsanleitung Epson SureColor SC-F2000 (Seite 79 von 104) (Englisch)

617671

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Message What to do

USB Memory Error

Failed to write to USB memory.

The USB memory may be in one of the following conditions.

❏ The USB memory is damaged

❏ The USB memory was removed while data was being written

❏ There is not enough free space or the number of saved files has reached the

maximum limit

U “USB memory requirements” on page 40

Check that the USB memory is not damaged and that there is enough free space.

Platen Move Error

Abnormal platen move detected.

Check platen path and press +.

A foreign object was detected in the platen's path while it moved forward or backward

into the printer. Check for the object in the platen's path and beneath the movable base.

Open the printer cover if necessary to check inside the printer. Close the printer cover after

checking.

Platen Height Error

Height sensor has detected

obstruction. Press } to move

platen and check shirt height.

The height detection sensor may have reacted because of the uneven print surface of the

loaded T-shirt. Press the } button to move the platen forward, adjust the height, and try

again.

U “Adjusting the Height” on page 35

F/W Install Error

Firmware update failed.

Restart the printer.

Turn the printer off, wait for a while, and then turn on the printer again.

Use EPSON LFP Remote Panel 2 to re-attempt the update.

If this message appears on the LCD panel again, contact your dealer or Epson Support.

Command Error

Check print settings on RIP.

Press the + button and cancel the print job. Check that the installed RIP software is

compatible with the printer.

Information

Some time has passed since

operation began. Finish task

quickly; nozzle check is

recommended once task is

complete.

10 minutes or more has passed since you started cap cleaning or head cleaning set

replacement. If the print head is moved out of its designated position for more than 10

minutes, the nozzles could easily be clogged. Finish cleaning or replacement as soon as

possible. When you have finished the operation, we recommend performing a nozzle

check to confirm that the nozzles are not clogged.

U “Checking for clogged nozzles” on page 44

Information

Power On Cleaning is off. Perform

head cleaning if required.

If cleaning is not performed for White ink for a certain period of time, print quality may

decline due to sedimentation (ink particles sink to the bottom of the liquid) and clogged

nozzles. Clean the printer if the printer is turned off for a long time.

When a Maintenance Call/Service Call Occurs

Message What to do

Maintenance Request

Replace Part Soon/Replace Part

Now

XXXXXXXX

A part used in the printer is nearing the end of its service life.

Contact your dealer or Epson Support and tell them the maintenance request code.

You cannot clear the maintenance request until the part is replaced. A service call occurs if

you continue to use the printer.

SC-F2000 Series User’s Guide

Problem Solver

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Epson SureColor SC-F2000 Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Epson SureColor SC-F2000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info